Full Polished Glazed Porcelain Tile 600 CL6D012
- Ref Price:
-
- Loading Port:
- Guangzhou
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1267.2
- Supply Capability:
- 100000 m²/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Product Brief Introduction
Full Polished Glazed Porcelain Tile 600 CL6D012 is one of the most popular color of Crystal Jade Serie, which is one serie of Polished Porcelain Tile in the present market. Just like other series, it could be used for interior floor for apartment, villa, super market as well as other public areas, due to its being high glossy and clean, homogeneous color shade as well as the reasonable price compared with natural stones.
Product Features
Polished Porcelain Tile, Double Loading
Only Grade AAA available
Strict control on color shade, deformation, anti-pollution, surface glossy degree as well as packing
Competitive price
Standard export packing: Pater Carton+ Wooden Pallet
Fast delivery
OEM service could be offered
Marketing support on samples, catalogues as well as carton designing
Professional sales team for product, document and schedule of importing and exporting.
Product Specification
Tile Type: Polished Porcelain Tile
Quality standard: GB/T4100-2006, ISO13006, ISO9001
Water Absorption Rate: 《0.5%
Breaking Strength: 》 1800 N
Rupture Modulus: 》40 MPa
Length and Width Tolerance: ±0.1%
Surface Smoothness: ±0.15%
Edge Straightness: ±0.15%
Wearing Strength: 《1600 mm3
Glossiness: 》 85 Degree
Resistance to Chemical: Class UA
Resistance to Staining: Class 3.
Packing Information (For 27.5 Tons heavy 20’Fcl)
For 600x600mm, 4pcs/Ctn, 40 Ctns/Pallet, 960 Ctns/20’Fcl, 1382.4m2/20’Fcl
For 800x800mm, 3pcs/Ctn, 28 Ctns/Pallet, 616 Ctns/20’Fcl, 1182.72m2/20’Fcl
Production Line & Package
FAQ
1. For Polished Porcelain Tile, is the 30*60 available?
—— Yes, 30*60 is available. Due to the basic size is 60*60, we need to cut 60*60 tile into 30*60. 6 pcs are packed into one carton.
2. What is the MOQ for this tile?
—— Normally the MOQ is 1382.4 m2 for one 20’ container. To support our clients, we could go with 3 models to fill one container at most.
3. Can we use the carton with our own design and brand name?
—— Yes. Normally we go with Neutral Carton or our Carton with our CMAX brand name. But for carton of client’s own design, the MOQ for one size is 5 containers, due to the carton factory can’t arrange production if quantity is below 5000 pcs.
1) Available in many designs, specifications and assorted color,unique designs and exclusive quality
2) Used for indoor & outdoor wall and floordecorations, as well as Stair Case Product;
3) Easy to install, anti-dust, washable, acid-proof,alkali-proof, durable
4) Material: glazed porcelain
5) Customized sizes available according to clients’ requirements
6) Available dimensions
Material | Porcelain |
Dimension | 600x600 mm |
Packing | Carton + Wooden Pallets |
Finish | Glossy, over 90 degree. |
Usage | Floor and wall |
Advanced glazing technology to make sure the tile surface beautyvivid and clean, via ink-jetting or silk printing.
We could go with OEM model, making 2nd productionbased on client’s requirement;
We could offer flexible service on shipment and better supporton payment term;
Our quality guarantee is based on the strict productionprocedure, quality controlling on the shade, straightness as well as whitedegree.
- Q: Our new kitchen tile floor was grouted last Thursday (almost a week ago). They did a poor job removing grout from the tile surface - very rough ceramic tile. I‘ve washed and scrubbed, it is cemented on. On top of that I don‘t like the grout color.Nothing has been sealed. So I got some acid wash and a grout stain from Home Depot. The stain says the tile should have been sealed prior to using it, I dont understand why that is. So I dont stain the tile? I‘m afraid if I sealed the tile it would seal the grout, so seems like a bad idea.And the acid wash... is this going to ruin the grout itself? How careful do I need to be about not getting in on the grout? Unfortunately its a large area, kitchen and dining area. 12‘ x 30‘. I‘ll be scrubbing a long time.Any suggestions to make this easier?Thanks!
- First STOP. You maybe going in the wrong direction. The seal is only for the grout not the tile. Almost no tile needs sealed. Do not use the acid wash unless it is made for grout film removal. A regular acid wash will damage the grout between the tiles. Before you try the acid wash, try using vinegar about 50 / 50 with water. Then if that does not work use the acid wash if it is for grout film removal. Follow directions very carefully. this is important because if the acid is too strong it will ruin the grout How if you had the tile installed by a flooring store call them for help. if you contracted direct with the installer you may have to clean yourself. Now for the color question. Grout changes color as it dries. It will not be the final color for about 30 days. Yes you can have the grout stained a different color, but it should be done by a professional.
- Q: Is the usual household and engineering brick Such as ordinary tiles and large tiles are much Synthetic tons of how many blocks around
- 30 * 45 within the wall of the general 22--26 kg a box of 10 --- 12 tablets ranging. There are 30 * 60 inner wall of the general 8 per box or so, also 22 --- 26 kg range Brand is not the same, packaging, weight is not the same, can only tell you about.
- Q: Why should the tiles be soaked before the tiles?
- Tiles of water need to split the water absorption in terms of water absorption <0.5% in the paving when there is no need to soak, and kitchen and bathroom with glazed tiles and tiles, water absorption is generally greater than 10% It is necessary to carry out soaking (if the porcelain wall for the brick, water absorption of less than 0.5%, of course, no need to soak). As consumers asked in the morning, you can have the following answer: Eno polished brick water absorption rate of 0.5% or less, can be ignored for the non-absorbent, the bubble will be the surface of the anti-fouling wax washed, the construction of poor protection It will pollute or draw the brick.
- Q: Looking to install ceramic tile over concrete basement slab, 12x12 or 13x13 tiles. Main question is how perfectly level/flat does the concrete need to be. If I put a tile down and there is some minor rocking is that no good or will the thinset adhesive take care of that.
- Any rocking means the tile is hitting either a high spot or there is a low spot. Low spots can be dealt with the thin set. As long as its less than a 1/4. High spots usually needs to be ground down flat. So to answer your question , for ease of installation and the prevention of cracked tiles at a later date, floors need to be as flat as possible. If you have minor rocking with no thin set down, in some cases a larger sized trowel will do the trick. Each case is different and has to be dealt with differently. Any questions you can e mail me through my avatar and check my qualifications there. GL
- Q: How do you tile anyway? thank you
- I will go with Rob on this one. Yes, it's possible using epoxy-based adhesives. However, unless you have a lot of experience doing this, it won't look right, especially if you are doing walls and have exposed edges. How are you planning on finishing the edges? Have you accounted for the decreased room dimensions? There are way too many variables. Rip it out and start over. There is a good chance that you may have to go down to stud as drywall tends to pretty much get trashed when you take tile off of it. When I remodel a bath and am re-laying all the tile, I ALWAYS take it to stud and start over. It saves time in the long run and in my business, time is money.
- Q: Ok.. what i mean is this. Let‘s say you have hard tile beside the toliet and water damaged occured. Once you press down on the tile you can actually feel the weakness in the tile.. Does this automatically determine bad subflooring or is it possible just bad tile, Can I just killz over the subflooring repaint and lay new tile?
- Does the tile wobble? It could mean the adhesive under the tile has deteriorated because of water leaks. Can you get under the floor and look up?
- Q: I have granite tiles I want to put on a kitchen countertop. I removed the laminate and underneath is about 1.5 thick of a particle board of some sort. The countertop is very sturdy and the board is in great shape. I know if this stuff get wet, you can have problems, but otherwise it seems to be very sturdy stuff. I know most people will say you need to put down a sheet of hardibacker, but I don‘t see the point. With a top grade thinset, these tiles will definitely adhere to the board extremely well. Grount lines will be extremely tiny and I‘m going to double seal everything with a really good sealer. I don‘t see anyway water is going to penetrate these tiles and thinset and get to the particle board. That‘s really the whole issue, right?
- You can do that no problem. Particle board is a very stable material as long as it doesn't get and stay wet a long time. Make sure you seal the edges of the particle board (if you're not covering them with tile). That's the area that's most vulnerable to water damage because of water that drips off of the top of the counter. But I have to say....tile as a counter is outdated and tacky. Get with the program. Use solid granite or solid surfacing. Tiled counter tops are embarrassing.
- Q: A week and a half a go I put eight 23 1/2‘‘ x 23 1/2 tiles on my sheetrock wall as a headboard and I can sometimes hear it crack! Will it fall?
- Sheetrock is not the best base for tiles. If the tiles start to pull away, they will pull the paper face away as well. It would be best to fix a sheet of fibre-cement to the wall first. Then seal the sheet before fixing the tiles.
- Q: what is vitrified tiles
- Vitrified tile is a tile that has undergone a certain process that gives it extremely low porosity, and thus, very low water absorption. This makes the tile hard and strong, as well as stain resistant.
- Q: I see Dongpeng ceramic tile on the packaging that write what the site, and then write the OF, OB what, I now Tangshan life, we say now Tangshan Dongpeng brick are Shandong, is that right?
- Dongpeng factory in Jiangxi Fengcheng Feng mine, the right is the Smick factory, the left is Marco Polo plant!
Send your message to us
Full Polished Glazed Porcelain Tile 600 CL6D012
- Ref Price:
-
- Loading Port:
- Guangzhou
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1267.2
- Supply Capability:
- 100000 m²/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
