Full Polished Glazed Porcelain Tile 600 YDL6CC312
- Loading Port:
- Guangzhou
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1267.2
- Supply Capability:
- 100000 m²/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Product Brief Introduction
Full Polished Glazed Porcelain Tile 600 YDL6CC312 is one of the most popular color of Crystal Jade Serie, which is one serie of Polished Porcelain Tile in the present market. Just like other series, it could be used for interior floor for apartment, villa, super market as well as other public areas, due to its being high glossy and clean, homogeneous color shade as well as the reasonable price compared with natural stones.
Product Features
Polished Porcelain Tile, Double Loading
Only Grade AAA available
Strict control on color shade, deformation, anti-pollution, surface glossy degree as well as packing
Competitive price
Product Specification
Tile Type: Polished Porcelain Tile
Quality standard: GB/T4100-2006, ISO13006, ISO9001
Water Absorption Rate: 《0.5%
Breaking Strength: 》 1800 N
Rupture Modulus: 》40 MPa
Resistance to Staining: Class 3.
Packing Information (For 27.5 Tons heavy 20’Fcl)
For 600x600mm, 4pcs/Ctn, 40 Ctns/Pallet, 960 Ctns/20’Fcl, 1382.4m2/20’Fcl
For 800x800mm, 3pcs/Ctn, 28 Ctns/Pallet, 616 Ctns/20’Fcl, 1182.72m2/20’Fcl
Production Line & Package
FAQ
1. For Polished Porcelain Tile, is the 30*60 available?
—— Yes, 30*60 is available. Due to the basic size is 60*60, we need to cut 60*60 tile into 30*60. 6 pcs are packed into one carton.
2. What is the MOQ for this tile?
—— Normally the MOQ is 1382.4 m2 for one 20’ container. To support our clients, we could go with 3 models to fill one container at most.
3. Can we use the carton with our own design and brand name?
—— Yes. Normally we go with Neutral Carton or our Carton with our CMAX brand name.
- Q:I live in an apartment and ive never had floor tiles like these.There is concrete underneath but I think these are ceramic tiles on top.I have no clue what to use to bring back the shine.Any suggestions would be helpful
- i take advantage of a Magic Mop which has an abrasive facet and a gentle facet so i will scrub from a top. It took a splash getting used to and that i now %. up the airborne dirt and airborne dirt and dust bits with the graceful factor besides. bought in a food market or Wilkinson kind save. I additionally use bleach and a tiny little bit of washing up liquid as suggested by using Aggie in how sparkling is your place. tried the steam mop and each thing became very moist, attempt to borrow one to attempt in the previous paying for,
- Q:Do they make that large of a difference? I am tiling my entire house, but can‘t find 1200 sq. ft. of the same tile dye number. I thought i could use different numbers in the bedroom. Is it going to be that noticable?
- Just buy a bunch of cases and mix them all up. See if theres an arrow on the back of the tile so you have them all pointed in the same direction.
- Q:I have 12x12 tiles in my kitchen on the floor and about 5 of them are cracked/damaged. How hard is it to replace them, can I do it myslef or hire a professional? What materials will be needed?
- It's very hard to match the tiles. Also you will have to remove the grout around each broken one, and then crack the broken one into pieces, then remove clean the surface, apply adhesive, and then the tile, and then grout. The color of grout will never match up 100% and neither will the tile. Also it will take you a good part of the day. Good luck with your project!
- Q:The difference between tiles and tiles.
- Tiles, tiles, the name is the same, in fact, there is no difference between the points. Are made of refractory metal oxides and semi-metallic oxides, through the process of grinding, mixing, pressing, glazing, sintering, and the formation of an acid-resistant porcelain or stone, etc., building or decoration materials, called For tiles. The raw materials are mostly made of clay, quartz sand and so on.
- Q:Ok my room has asbestos on the vynil tile floor and it‘s in good condition. I‘m trying to put a carpet on top of the floor is it possible without removing the tile? Home Depot wants me to remove it before they install the carpet.
- It is possible to install a rug over asbestos tile. Legally, if you wanted to remove the tile, you'd have to hire a licensed asbestos abatement contractor to do the work and dispose of the tiles. They can't just be thrown in any landfill. It could get costly depending on your budget. The advantage is that once you remove the asbestos, its good for good and its easier to sell the house later on in life. However, Home Depot and a few other contractors prefer to lay carpet down on bare floors. The concern is years later, they can't guarantee their work because the tiles under the rug could come loose, etc.
- Q:The house has been living for two years, these days do not know the weather is wet or how the matter, the bathroom tile actually fell a few pieces, but fortunately did not break. Now want to paste it back, I would like to ask, how to paste? With cement? Or what other glue? Do you want to drink again before There is also a problem with the brick at that time, but the closure or other problems? Another: Tiles are Mona Lisa. Thank you!
- If you want to use the same as the original, it is necessary to use cement mortar paving, they can also use glass glue, but because the glass glue is basically stick a few points, so there will be hollow drums, water will go into the water, Hook the agent is also very necessary Oh.
- Q:Hey there. We are in the process of adding a half bath to our home. We purchased tiles months ago at a tent sale at out local tile store. We have some wall corners that might require bullnosed corner tiles but this wasnt taken into account when we purchased the tiles and now we cannot find matching bullnose tiles anywhere.......Is there any was to finish the wall edges without using bullnosed tiles and have it still look good???
- Bnose tile is a new simplified way of doing tile and was to remove one of the grout edges. So all you have to do is grout the top like they did in the old days a few years ago. You could also use a thin lat of flat trim, a brass or stainless steel edging, or caulking that matches the wall or tile. I think the simple grout is your best bet. PS. Where corners meet If the tile is same color through they can show. If it is glazed colored or just a thin color on top then no. In that case cut the tile back so that they do not quite reach the corner. Then there will be a slight inverted corner where you will grout or caulk. In neither case would you want to miter the corner. It will be too sharp and thin corners would be weak enough to chip.
- Q:should i put tile in my kitchen if im gonna put wood floors in rest of my house ? or should i put the wood floors all through out ?? does it look ok with tile and wood transition ??
- Hi, In a survey of real estate agents they said that homes with hardwood sold for more and faster. I think it is a matter of personal preference as to what you use. I think any tasteful quality product helps the resale of your home. I personally have hardwood in my kitchen and love it. I also have tile in my bathrooms and entryway and love tile there.The tile stands up to all the water in a bathroom and all the dirt in the mudroom that gets dragged in. The tile in the entryway comes right up to to tile in the kitchen and looks great. I personally do not want tile in my kitchen as it is not very forgiving when something is dropped. I spend a lot of time on my feet in the kitchen and find tile to be a hard surface on your back and legs. Both have a long life but hardwood is more susceptible to damage. It can be sanded and refinished but it is costly. Hardwood you do need to wipe up spills right away and should have an area rug by your sink especially if you have kids that do dishes like mine water all over. I have had my hardwood for over 12 years and it still looks great. Hope this helps.
- Q:How to convert tiles how much money a square meter?
- Tiles are generally quoted according to the block, to be converted into square meters of the price you need to calculate the area of each brick (unit: square meters), and then the price of each tile divided by the area of each tile (unit: square meters) You can get the price per square tile. For example, 800mm * 800mm tile is 100 yuan a piece, each tile area is 0.64 square meters, so the price per square meter is: 100 / 0.64 = 156.25 (yuan / per square meter), and so on. Tiles, living room is generally 800mm * 800mm or 600mm * 600mm, kitchen and toilet generally 300mm * 300mm or 300mm * 450mm, then 800mm * 800mm brick, converted into rice is 0.8m * 0.8m, then 800mm * 800mm brick is 0.8 Meter * 0.8 meters is equal to 0.64 square meters, 600 * 600 brick is 0.36 square meters, 300 * 300 brick is 0.09 square meters, 300 * 450 is 0.135 square meters.
- Q:would like my cory tile to shine without being slippery. What products work best without streaking like crazy ??
- tile okorder ... There is a product called the Bona Hardwood Floor Mop as well... it is a hardwood flooring cleaner but there are other cartridges you can purchase that is a tile flooring cleaner to attach to the mop! I love the Bona! Maybe you'll like it too! I have both cleaners for the Bona, hardwood and tile... they're amazing!
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
Full Polished Glazed Porcelain Tile 600 YDL6CC312
- Loading Port:
- Guangzhou
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1267.2
- Supply Capability:
- 100000 m²/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches