Fire-proof low smoke and halogen free flexible cable-WDNA-RYY
- Loading Port:
- China Main Port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- 10000 km m/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Application: Mainly used in power industry, metallurgical industry, petrochemical industry, building industry and other constructional projects, specially in 0.6/1kV rated transmission line, distribution network and specific area with high population density which required flame-retardant and fire-proof for safety purpose.
Product characteristic:
Minimum bending radius: 20D for single core un-armored cable, 15D for single core armored cable, 15D also for multiple cores un-armored cable, and 12D for multiple cores armored cable.
Temperature rating: 70℃ for PVC insulation, and 90℃ for XLPE insulation.
Highest temperature when short circuit last 5 seconds: 160℃ for PVC insulation, and 250℃ for XLPE insulation.
Flame retardant property comply with GB/T 18380-2008; Fire proof property comply with GB/T 19216-2003.
Manufacturing standards: Chinese stardards(GB,JB), International Electro-technical Standard(IEC), British standard(BS), Australian and New Zealand Standards(AS-NZS).
Products certification: CCC, CQC, CE, TUV, Rohs and so on.
- Q: Hi, I bought a geforce gtx 660 ti and with it came 2 X 6 pin PCI express power cables. Problem is I only have 2 connectors in my computer, so one cable is useless. Will 2 Athena Power Model CABLE-YPHD 8Molex Y Splitted Power Cables allow me to use both the PCI cables? Thanks.
- Hi There, Both ports need to be connected for power for the card and if that is the case then two feeds from the power supply would need to be used. This would be because one power feed with the Y connector probably would have too much load on the one single feed and it would overheat and could cause a big problem. To be absolutely sure you should refer to the instruction manual for exactly what is needed. If still unsure a call to the manufacturer should sort things out. By the way this video card requires a 450 watt (or larger) power supply to operate properly. I would buy a proper power supply for this powerfull video card. This card needs 400 watts if overclocked so I would go for a power supply of about 600 watts (or larger) with feeds for each power adapter for the video card. Hope this helps, Al
- Q: I bought a ATI HD2600 Pro Video card todayHere is the list of what my computer specs,Pentium 4 2.53 GHzCurrent Videocard - Rage Fury Pro 2000 Pro (Microsoft Corp)slot - AGP 8xmotherboard - BCS PT800CE - Aram - 512MB PC2700 333 MHZ (2 of them) 1G ramMonitor - 19ViewSonic VA902B 1280 x 1024im not sure about my battery wattage is enough for the card or not. it says 400+ battery supply is recommended, could it be the reason?when i plugged in my monitor cable to the adaptor for dvi to AGP and connect it to my video card, HD2600 Pro. I turn the computer on, but the monitor do not turn on. it just stays as it was. i have made sure that the monitor is on and all the plugs are right i do not understand what happen. BTW, when i try to check my bios settings, i am able to access it after putting in my password, but it won't let me update, everything is in blue, except some are quot;press enterto allow me to see the details. why is that? please help me...please please.
- it might if so the plugin looks like a floppy drive plug four pins if you got the card new and it has an adaptor you will have to use it most ati cards that have external power syncronize with the hard drive .
- Q: What type of plastic is a power cable made of? Thanks.?
- Power cable isn't made of plastic, it is copper or aluminum covered with PE, PVC, or PTFE plastic.
- Q: when you install a power cable you usually route it through the door seal and under the carpet. If there are existing speaker wires that go to your rear speakers, will the power cable create an interference?
- General rule is to keep power wires and wires that run sound signals separte. I always run my power and remote wires on one side of the car and speaker and rca wires on the other side of the car.
- Q: I mean like the power connector cables. All power supplys have the same cables to supply power from the PSU to components right?
- not all PSUs have the same cables but they do all come with the same standard connectors. for example all PSUs regardless of wattage and brand will have the 4 pin molex conectors but not all will have the 6 pin and the 8 pin PCIe connectors and the higher end models will also come with 2 CPU 4 pin power connectors. which PSU you get depends on wattage demand of your system, amperage demand if you have a video card requireing extra power and the number of molex/sata power cables and PCIe 6/8 pin connectors you need.
- Q: Can A bad battery or power cable cause a laptop to Blue Screen?Is there anyway to pinpoint the actual cause?
- If the battery is bad and the lap top is shut down from lack of battery or power from the power adapter charger it causes the operating system to crash or causes whats called a hard shut down and this in tern causes the operating system to develop corrupt system files. Fix replace battery or use on the power adapter only and re install or repair the operating system using a set of recovery disc made for the lap top.
- Q: My friend gave me a PS2 as a gift of Friendship but it was missing a cable. And that cable was the power cable. He told me I can use a power cable that some radios use, and it will be the same. Although I have doubts. I think I have like 2 radios out back so I'm wondering if they actually DO work. I'm going to attempt this tomorrow so I need a answer ASAP and please don't make it a simple answer, include some detail if possible. Like what exactly is the Power Cable I need so I can take a look at the Radio's power cable to see if its the right one. I'm unfamiliar with the Power Cable actually because I haven't seen a PS2 in almost 4 years since I got my PS3.
- I've done it. It really depends on the wire, not only if it fits the PS2.
- Q: hey guys, i recently bought a new desktop computer however when i unpacked it and put it all together i discovered that i had not received a power cable for the tower. i discovered an old one in the mess that is my bottom drawer and was wandering does it matter what power cable is used for the tower? or are there different power cables for different PSU's?
- They should all be the same (as well as for most displays and other larger peripherals )
- Q: im hooking up a system in my truck..im doing it the redneck way they way i have watched my dad do it many of many of times. im using jumper cable wire!! yes jumper cable wire, its plenty of juice the perfect size! but im not sure if he ever used a fuse link.do you have too? what if i dont use one? if so where is the cheapest place to get it?what size fuse is it?
- Any wire that you connect to your battery should have a fuse, located as close to the battery terminal as possible. Without a fuse, a short circuit on the wire could result in a fire. Most car audio stores should have fuses and fuse holders available. The size of the fuse depends on the size of the wire. An 8-gauge wire can be fused up to 50 amps; if your wire is 4-gauge, then you can go up to 120 amps or so.
- Q: I am working in ship is it possible the welding cable can run together (same cable tray) with power cable 400V and 220V
- The welding cable has lower voltage (<40Volt) but a large current. The welding cable used to have lower insulation Resistance compared to the power cable. That is why it is not recommended to run the welding cable in same tray to the power cable
Send your message to us
Fire-proof low smoke and halogen free flexible cable-WDNA-RYY
- Loading Port:
- China Main Port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- 10000 km m/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches