Double Loading Series Polished Porcelain Tile Earth Color ZSL36017Z/C/G
- Ref Price:
-
- Loading Port:
- Shekou
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1267.2
- Supply Capability:
- 100000 m²/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Product Brief Introduction
Polished Porcelain Tile Double Loading Serie Earth Color ZSL36017Z/C/G is one of the most popular color of double loading Serie, which is one serie of Polished Porcelain Tile in the present market. This kind of tiles could be used for interior floor for apartment, villa, super market as well as other public areas, due to its being high glossy and clean, homogeneous color shade as well as the reasonable price compared with natural stones. For the three finishes of the tile, we can apply the tiles in many different areas.
Product Features
Polished Porcelain Tile, Double Loading
Only Grade AAA available
Strict control on color shade, deformation, anti-pollution, surface glossy degree as well as packing
Competitive price
Standard export packing: Pater Carton+ Wooden Pallet
Fast delivery
OEM service could be offered
Marketing support on samples, catalogues as well as carton designing
Professional sales team for product, document and schedule of importing and exporting.
Product Specification
Tile Type: Polished Porcelain Tile
Quality standard: ISO13006, ISO9001
Water Absorption Rate: 《0.5%
Breaking Strength: 》 1800 N
Rupture Modulus: 》40 MPa
Length and Width Tolerance: ±0.1%
Surface Smoothness: ±0.15%
Edge Straightness: ±0.15%
Wearing Strength: 《1600 mm3
Resistance to Chemical: Class UA
Resistance to Staining: Class 3.
Packing Information (For 27.5 Tons heavy 20’Fcl)
For 600x600mm, 4pcs/Ctn, 40 Ctns/Pallet, 880 Ctns/20’Fcl, 1267.2m2/20’Fcl
Production Line & Package
FAQ
1. For Polished Porcelain Tile, is the 30*60 available?
—— Yes, 30*60 is available. Due to the basic size is 60*60, we need to cut 60*60 tile into 30*60. 6 pcs are packed into one carton.
2. What is the MOQ for this tile?
—— Normally the MOQ is 1267.2 m2 for one 20’ container. To support our clients, we could go with 3 models to fill one container at most.
3. What is your Packing?
—— We use plywood pallets with blue resin wrap at the outside of the tiles.
- Q: my floor tile has a crack so i replaced one tile with the same exact tile but but the new tile looks different how do i make the new tile look like the old tile
- challenging step browse with the search engines just that might help
- Q: I am replacing a floor furnace and may need to replace some tiles. These are nominally size 11-1/2 x 11-1/2 x 1/2 inch. Thanks.
- Porcelanosa okorder /
- Q: Or can I just start tiling over the painted wall?
- I would recommend using cement board in the shower (assuming you will be taking the green board out). You'll be using the 1/2 cement board for the walls. While you're at it, don't forget to install a moisture barrier, and be sure to seal the joints of the cement board with modified thinset and waterproofing membrane, and don't make the mistake of using mastic for setting tiles. If it's just around the bathroom walls and not in the shower, consider the size and weight of the tiles. If they are just your standard 4 1/4 tiles, just tile straight to the wall. Make sure the surface is prepped properly. Shoot me an email if you have any other questions.
- Q: I live in a split level 3 story house, the outside of my house is concrete, the walls inside are concrete and the floor is tile. Several weeks ago the tile in our laundry room cracked, as if something was pushing up from underneath. This morning the exact same thing happened in our top story living room. We had tilers come out to re-tile and they said that this happens all the time, but the concrete underneath the tile was untouched and un-warped in any way. Please help? What can we do to fix this from ever happening again?
- .If your home was recently built, it may still be settling. Homes, especially those built on fill often take several years to settle. The fact it happened in both the basement and the third floor makes me suspect this is the case. Keep in mind that concrete will expand and contract with temperature changes. If you live in the northeast the rapid temperature changes we've been experiencing could also have something to do with it. As far as happening ever again, the best policy is to wait and see. Wish I had an easy fix for you. Good Luck.
- Q: My bathroom in my new house has the ugliest green tile halfway up the wall and then a different shade of green tile on the floor. My husband I have a little experierience with fixing stuff up, but this one has us puzzled. We want to tear the tile down and put up drywall. Then we‘d like to carpet the floor. We haven‘t got the nerve yet cause we don‘t know what to expect behind those tiles on the wall. Got ANY suggestions in my little dilemma???
- If the tiles go all the way around the room, measure up 4' at each corner. Use a chalk line or level to make a horizontal line around the room. All hardware below this line should be removed. Towel bars, heat register covers, cabinets, toilet, door trim, etc. If the wall is drywall, you could cut along this line with a drywall hand saw. If you have access to a sawzall (reciprocating saw), the process will go quick. (If you're handy, you should have this tool). To avoid cutting wires, pipes, pay close attention when cutting. Lay tool against wall in line with chalk line. Start blade, slowly, then lower blade to line. Now tilt blade inward. CAUTION. Go only as deep as needed to penetrate wall. If you go deeper, you risk cutting wires or plumbing. Now pull saw along line around perimiter of room. Safety glasses are recommended during cuttiing and removal. Use hammer to make hole in wall just below cut line. Using Gloves, pull sections of drywall and tile by hand as much as possible. If screws remain in the studs hit with a hammer at a 45% angle. they should break off. If it's nails, you should pull them. Floor tiles will come up with a flat pry bar and a hammer. Just pick a spot along an edge. Use a couple sharp blows with hammer to start, then use flat bar and hammer to peel out floor tile and grout. Hope this motivates you to go for it.
- Q: Used 600x300 glazed tile for the whole outdoor building. 30% tile gum and cement mixed for the work. 6 months later, the Tiles begun to fall off the wall leaving the cement still strongly bonded on the wall. I mean, the tiles ONLY fall donw, not with the cement. Note: We usually soak SOME ceramic tile with water before pasting them, IF the type call for that. But the type is apparently out of the case of water solution.Granite is even heavier than that and yet lasts virtually with building.
- Outdoor Wall Tiles
- Q: i want to tile my house, i also want to pay less than a dollar per square foot for the materials. on top of that i want 16 tile... i know these deal exhist but i dont know where to look... please help
- Try the Habitat for Humanity Restore. I have had real good luck picking up ceramic wall and floor tile for as little as $o.25 each!
- Q: I am building a deck outside my living room am#92;nd the dimensions are 8‘ wide by 24‘ long.It is 14‘ up at the highest point as I am on a hill. I‘m using 2 by 6 joists with 2 by 12 headers. Here is what I want to do: someone told me to use a 1/4 in slope over 8 ft. for water run off. I want to tile the deck. Iwant to know what size plywood I should use and if there is some kind of waterproof fibreboard I can use as a base for the tile in lieu of laying down rubber for the base. I dont want sand or pitch due to the weight factor. Is there something fairly lightweight and waterproof suitable for a base for the tile? If so what is it called? and where can i get it? Thanks.
- Use treated 3/4 inch thick plywood that comes in size 8' x 4'.Then after thats on put contractor grade plastic paper probably 8mill thick;thicker plastic the better.When you put this over the plywood you still have to put the cement board on for the tile to adhere to.All this can be purchased at your lumber store,Home Depot or Lowes,etc..To help keep moisture from getting under neath..3M sells a under coat spray paint in the can for cars;you can spray all the wood that you see under the deck when finished(buy at auto parts store).
- Q: Okay, I‘m doing a tub surround with porcelain tile. Got the last cut around the fixtures that requires a hole to be cut in the center of the tile. Long story short, I‘ve busted 22 tiles trying. I‘ve tried every single drill bit I‘ve got. Everything from metal hole punchers to concrete bits. Nothing even scratches this porcelain tile. Any tips on how to punch a hole in this tile? I‘m desperate!
- Hi okorder It should take you directly to the page where they sell the bits you need. As you can see, they're available in several sizes. Again... don't cut a tile in half, it will show and look like handyman's work... we don't want that! Good luck! Let me know if you have any questions
- Q: The last people to live in my house decided to use black spray paint on the bathroom tiles and it looks awful (not to mention the fact that it is peeling and uneven as it wasn‘t done properly). However the tiles underneath are blue and white so I would like to keep them. What is the best way to remove the black paint without scratching the surface of the ceramic tiles?
- Try baby wipes. They are surprisingly effective on tiles.
Send your message to us
Double Loading Series Polished Porcelain Tile Earth Color ZSL36017Z/C/G
- Ref Price:
-
- Loading Port:
- Shekou
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1267.2
- Supply Capability:
- 100000 m²/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
