Decking High Density WPC Portable Outdoor Flooring
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 300 g/m²
- Supply Capability:
- 10000 g/m²/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
1> What is WPC?
WPC, simply for wood plastic composite.
Wood Plastic Composite is made from a unique combination of plant fiber and recycled plastic
according to high-tech formula.
It offers the best advantages of plastic and wood. The plastic shields the wood from moisture and
insect damage, and the wood protects the plastic from UV damage and gives you a natural feel.
It has characteristics of high strength and rigidity, acid and alkali resistance, corrosion resistant
and without formaldehyde, it is a real green environment protection building material.
2> What’s WPC used for?
WPC can be used for military equipment, urban utilities and landscaping, architecture,
gymnasiums, outdoor decking, fencing, pallets, indoor and outdoor decoration.
FAQ
3> Why choose WPC decking?
*Natural colour
*Slip resistant
*Resistance to water, rot and crack
*Guaranteed to last
*Low maintenance
*Beautiful and broad range of finish
4> What are the main kinds of WPC currently?
*WPC decking board
*DIY decking board
*WPC wall panel (wall cladding)
*Garden fence (railing)
*WPC outdoor furniture (gazebo, pavilion, outdoor desk&chair, dustbin, pet house…)
5> Ingredients of WPC?
30% HDPE+60% bamboo/wood fiber+10% Chemical additives.
6> How’s WPC made?
7> Specification of WPC?
A. Weatherability
suitable from -40° C to +60° C, UV resistance
B. Test Data
Testing Item | Technical Requirements | Value of Test |
Water Content % | ≤2 | 0.4 |
Rockwell Hardness (HRR) | ≥60 | 80 |
Thickness Swelling after Water Absorption (%) | ≤1 | 0.2 |
Screw Holding | Surface of board ≥1300 | 3870 |
End of board ≥1200 | 3460 | |
Static Bending | ≥20 | 28 |
Bending Elastic | ≥1800 | 4610 |
Abrasion | ≤0.08 | 0.06 |
Hammer falling impact in low temperature, broken (pcs) | ≤1 | 1 |
State after Heating | No babbles, cracks and pockmarks | - |
Rate of Size Change with Heating (%) | ±2.5 | -0.38~-0.45 |
Report Number: 201107126
Type of sample: 90x25x820mm, Solid
C. Surface treatment
D. Main colors available:
charcoal-black; classic-white; rinforest-canopy;sand-castle; stepping-stone; tree-house; vintage-lantern .
E. How to install
Company Information
8> About CNBM and It’s WPC products
China National Building Material Corporation (CNBM), long history since 1984 is one of the top
fortune 500 corporation and central enterprise with total assets of more than $20 billion and
120,000 staff.
Our unique advantages:
* Preferential payment terms
* Good and reasonable price
* Quality guarantee -- CNBM won't let a single small deal ruin our reputation and brand, so quality is
our lifetime.
* Professional team for CRM order processing & QA & logistics
*Global logistic database, originated from Dubai
- Q: Which is cheaper, having my badly damaged oak floors patched and refinished by a professional or installing a pergo type floor over the existing flooring myself? I know the level of the floor will be raised up a bit. That's ok.
- It would be better for the resale value of your home if you re-did the natural wood floors. If you do some research you might be surprised to see how much of the repair job you can do yourself, thus decreasing labor costs a lot. Pergo is okay, but will be damaged by water if there are leaks somewhere. Ours has been pretty well ruined by the dishwasher and air conditioner backing up. We had to tear up part of the living and all the dining room to find and replace some by the back door (the seal had worn and rain leaked in under the floor so we didn't know) that was mildewing underneath (and stinking!). Big time hassle. I'm thinking of going tile next time.
- Q: i was looking for a rabbit hutch and most seemed to have wire flooringwhy is that? and doesn't it hurt the rabbit's feet?should i get the ones with wire floors or solid wood floors?
- Some folks here won't want to hear it but if they are correctly made, wire floors are fine for all but the heaviest weight breeds (Flemish Giants, Checkered Giants, etc). It needs to be 1/2gageire galvanized after welding and 16 guage at the lightest. There are powder coated and plasticised versions that you can use as well. When we had French Lops (minimum adult weight 11 lbs and most of ours were in the 14-15 lb range) we had them on wire and never had a sore hocks problem. You can use a piece of sheet rock for a sitting board if you want and throw it when it gets nasty. Frankly wire floors are a lot more sanitary. We would wash down the cages weekly, but when we really wanted a thorough clean, we loaded them up and took them down to the car wash and used the pressure wand on them. Slick tile has 2 problems. The first is that it is slick and the rabbits don't walk well on it. It is a traction problem - we see it whjen our cats chase each other into the kitchen and slide like crazy! The second problem is that the urine will go over the edge and soak into the poros underside of the tile unless you grout and seal the grout.
- Q: Floor material The choice of thickness As well as the installation of the precautions? Not very grateful! More
- Floor material The choice of thickness As well as the installation of the precautions? Not very grateful! More
- Q: Hey,I get ready to renovate the floor in the house, I learned ceramic floor tiles are available in colors that suit many decors. Because ceramic tiles are so long lasting, yet I get tired of the original color but not want to go to the expense of replacing the tiles. That's a good time to think about ways to decorate floor tiles to spruce them up and give them new life. How do I need to cope with the redecoration with the ceramic floor tile?
- Urethane okorder
- Q: I would get a bathroom rug set, but I want the whole floor covered. I also rent so I don't want to damage the floor.
- How about a Hawaiian bathing room? This adorning topic will bypass with basically about any tile color. you are able to bypass very camp with it, or extra subdued. i imagine the jade eco-friendly tile might want to seem tremendous with an all-out Hawaii topic, with grass skirts, leis and hula woman decorations.
- Q: I am laying a three part epoxy resin flooring to a factory floor. Any tips?????
- Normally an epoxy resin floor is 2 part epoxy with a third component is color flacks that are hand spread over the resin as it is spread on the floor.. I am assuming you are going to apply this to a concrete floor. Mix the resin according to the instructions on the box or container it comes in. Follow all instructions that come with the product relative preparing the floor, such as cleaning up dirt and grease. once the resin is mixed in a large enough sized container. You may want to apply the resin around the outside edges of the floor about 5 or 6 inches with a throw away brush. spread the resin on the rest of the floor with a paint rollers. Do relatively small sections at a time and sprinkle the color flakes over each section as though you were broadcasting grass seed or ice melt. You will probably find that you will need 2 coats of the resin to cover the floor well.
- Q: Are there a few thick walls? How thick is thickest? Buy the floor are generally more thick to buy more
- There are 8 mm, 10 mm and 11 mm, solid wood is 15 mm thick, in fact, 8 mm is enough, but if you want a sense of foot more comfortable Kazakhstan, slightly thicker 11 mm is very good
- Q: I want to lay floating floors but my OSB sub floor is uneven. In some spaces it gets close to a inch in difference. I was wanting to know if floor leveling compound will fix this? Also if you could give my a brand or name of a good one.
- Floor leveling compound will do the trick. Clean floor well, use the recommended latex primer and do the pore.Check the thickness you can do in a single pore though. Some levelers you can only do certain depths in one pore. You may or may not have to do it in 2 pores. There are some self leveling compounds that you can do in a single pore. Any questions you can e mail me through my avatar, I ve attended several installation seminars as well as installed a couple 100,000 s/f/ GL
- Q: Can radiant floor heating be installed in the concrete pour, then after concrete has sufficiently cured (28 days) can a resinous coating, such as a epoxy/polyurethane floor coating be installed on a floor that will later be radiant heated. My concern is that these coatings are very moisture intolerant. Does radiant floor products, create any moisture in the slab that could rise to the surface. Does changes in temps affect the moisture levels in concrete. Electric radiant floor products seem to be best.Pipes filled with hot water to me is a concern. Do the pipes "sweat" causing condensation or are they wrapped. I am currently on a large project and these questions are coming up in the design forum.
- There are three types of radiant heat for floors. First there is the electric, also the water, but there is also a product called AirFloor which uses a multi-duct system that is poured into the concrete. These little network of ducts replaces the standard duct system for the building. Either way you go, moisture shouldn't be a problem. If you are worried about the resinous coating, go with a true polished concrete. It will last forever and is maintenance free. As long as the building is kept at a constant temperature, sweating shouldn't be an issue. Good Luck
- Q: There is probably a square of a box of composite flooring
- The brand of different packaging specifications, the brand under the variety of packaging specifications are also different. But the general conventional packaging specifications, a box of the basic area of about 2-3 square. Look at his packaging specifications, the length of the floor specifications
Send your message to us
Decking High Density WPC Portable Outdoor Flooring
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 300 g/m²
- Supply Capability:
- 10000 g/m²/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords