Ceramic Filter Plate 2 - Advanced Ceramic Filter Plate
- Ref Price:
-
- Loading Port:
- China Main Port
- Payment Terms:
- TT or L/C
- Min Order Qty:
- 100Pcs pc
- Supply Capability:
- 2000Pcs Per Month pc/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
General Information of Ceramic Filter Plate
CMAX ceramic Filter Plate is a kind of large porous ceramic disc which is fired by inorganic membrane making technology. Regarding firing process, traditionally the ceramic plate is consisted of two layers of plates which are glued together to form inner channels. CMAX ceramic filter plate is made from high purity alumina silicate fibers mixing with inorganic binders by vacuum forming process. It is widely used in aluminum alloy melting furnace to control the production flow of molten aluminum. But after long term running, the glue will block the pores to cause flower spots on the surface of the plates.
Feature of Ceramic Filter Plate
Good thermal insulation
Durable mechanical strength
Size of micropore is small (normally with diameter of 1.0um), strong capillary effect.
Low power and energy consumption as filter rates drawn into micropore automatically.
High filtration pressure drop (vacuum degree can reach-0.098Mpa) and low moisture of filter cake.
Filtrate is clear and transparent with low suspended substances (21ppm), Filtrates can be used as industrial circulation water
Application of Ceramic Filter Plate
Aluminum alloy melting furnace for die casting industry
Other shapes like sleeves or risers for sand casting foundry
Other shapes like sleeves or risers for sand casting foundry
the application can be divided into two types, one is used for the two phase separation, the other is to disperse a phase to another, that is to combine the two, especially for liquid filtration, gas filtration, fluidization, etc..
CNBM has success in its ceramic filter plate products due to their cost-effectiveness and excellent insulating properties. CNBM also has experience in ceramic filter plate application and would like to assist you in product selection, system design, and installation techniques. Our products of ceramic filter plateare in good quality and in best price.
- Q: Performance advantages of ceramic filter
- The base is provided with a slime recovery rotor, the rotor consists of a shaft, multistage ceramic filter disc, stripper plate, multi section water connecting pipe, pipe support plate, negative pressure connecting component dynamic disk; the rotor is in the recovery of coal slime liquid tank; the ceramic filter disc by a plurality of ceramic microporous plate cavity, located on the same axis of a ceramic plate cavity communicated through the outlet connection pipe.
- Q: The ceramic filter plate is broken. What will happen to the vacuum pump?
- At this time, take the filtrate (this is not the first water slurry) will pollute the ceramic filter pipe, friction ring, filtrate pump, may damage the vacuum system, remaining in the pipeline in the pulp will recoil pressure under the action of pollution caused by the other ceramic plates, ceramic plates blocked him. Once the ceramic plate is broken (depending on the severity), it will make the vacuum distortion, resulting in ceramic filter suction effect worse or even no suction!
- Q: Working principle, ultrasonic trouble and troubleshooting of ceramic filter
- The shape and mechanism of the ceramic filter are similar to those of the disc vacuum filter, but the filter media are different. The filter medium of ceramic filter is the ceramic filter plate, it can produce the micro capillary effect and capillary force in micropores is higher than the general vacuum applied force, so that the pores keep full of liquid state, so no matter what the circumstances, the air does not pass through the ceramic filter plate, so that the ceramic filter solid-liquid separation of low energy consumption, and high vacuum.
- Q: What are the causes of the powder moisture in the ceramic filter?
- The ore condition has changed, such as high concentration of material, fine grain size and increase of mud content.
- Q: The efficiency of ceramic filter is low. What's wrong with it?
- Ceramic filter is a new and efficient dehydration equipment. If users find the ceramic filter board surface suction effect is poor, or even do not suck slurry, we should promptly investigate the causes, so as not to affect production efficiency.
- Q: Can the plate filter press pass through the filter plate?
- There are many types of pumps to be used, such as screw pumps, slag pumps, rotary pumps, piston pumps, and diaphragm pumps.
- Q: The vacuum degree of the ceramic filter is normal and the cake water is large
- The vacuum degree of the ceramic filter is normal at about -0.08MPa. Under normal circumstances, the water content of the filter cake treated with a ceramic filter is about 10%, and the moisture content of the tail filter cake is about 15%. The water content of the filter cake increases with the increase of water content in the ceramic filter. I analyze the reasons from two aspects.
- Q: Ceramic filter ceramic plate blockage, productivity reduction, how to clean, to achieve the best effect cleaning problems
- Equipment comes with cleaning:Ceramic filter comes with a combined cleaning system, usually to ensure the normal backwash water pressure, combined cleaning (nitric acid + ultrasonic + backwash) time is sufficient, sufficient amount of nitric acid.
- Q: The vacuum of ceramic filter is not enough
- Maybe the vacuum meter is broken. It doesn't show or show the data is different from the actual data.It could be the source of the vacuum, the vacuum pump failure.Pipeline leakage: vacuum system connecting pipes (metal pipes or rubber pipes) corrosion, aging and water leakage.Distributor head leakage: wear or poor sealing.Leakage of ceramic plate: rupture of ceramic plate.Other reasons.
- Q: What are the functions of honeycomb ceramic filters?
- At present, it is widely used in metallurgy, foundry industry, metal melt filtration, using mullite (cordierite) ceramic materials
1. Manufacturer Overview
| Location | Shandong, China |
| Year Established | 2002 |
| Annual Output Value | Below US$1 Million |
| Main Markets | Asia;America; Africa; Europe; and so on |
| Company Certifications | Quality management system certificate |
2. Manufacturer Certificates
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period |
3. Manufacturer Capability
| a) Trade Capacity | |
| Nearest Port | Qingdao |
| Export Percentage | 1% - 10% |
| No.of Employees in Trade Department | 21-50 pepole |
| Language Spoken: | English; Chinese |
| b) Factory Information | |
| Factory Size: | About 230,000 square meters |
| No. of Production Lines | 37 lines |
| Contract Manufacturing | Design Service Offered |
| Product Price Range | Average |
Send your message to us
Ceramic Filter Plate 2 - Advanced Ceramic Filter Plate
- Ref Price:
-
- Loading Port:
- China Main Port
- Payment Terms:
- TT or L/C
- Min Order Qty:
- 100Pcs pc
- Supply Capability:
- 2000Pcs Per Month pc/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
