Ceramic Filter Plate 1 - High Quality Ceramic Filter Plates
- Ref Price:
-
- Loading Port:
- China Main Port
- Payment Terms:
- TT or L/C
- Min Order Qty:
- 100Pcs pc
- Supply Capability:
- 2000Pcs Per Month pc/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
General Information of Ceramic Filter Plate
CMAX ceramic filter plate is made from high purity alumina silicate fibers mixing with inorganic binders by vacuum forming process. It is widely used in aluminum alloy melting furnace to control the production flow of molten aluminum. CMAX ceramic Filter Plate is a kind of large porous ceramic disc which is fired by inorganic membrane making technology. Regarding firing process, traditionally the ceramic plate is consisted of two layers of plates which are glued together to form inner channels. But after long term running, the glue will block the pores to cause flower spots on the surface of the plates.
Characteristic of CMAX Ceramic Filter Plate:
Good thermal insulation
Durable mechanical strength
High strength, abrasion and corrosion resistantance and long service life.
Size of micropore is small (normally with diameter of 1.0um), strong capillary effect.
Low power and energy consumption as filter rates drawn into micropore automatically.
High filtration pressure drop (vacuum degree can reach-0.098Mpa) and low moisture of filter cake.
Filtrate is clear and transparent with low suspended substances (21ppm), Filtrates can be used as industrial circulation water
Application of CMAX Ceramic Filter Plate:
Aluminum alloy melting furnace for die casting industry
Other shapes like sleeves or risers for sand casting foundry
the application can be divided into two types, one is used for the two phase separation, the other is to disperse a phase to another, that is to combine the two, especially for liquid filtration, gas filtration, fluidization, etc..
CNBM has success in its ceramic filter plate products due to their cost-effectiveness and excellent insulating properties. CNBM also has experience in ceramic filter plate application and would like to assist you in product selection, system design, and installation techniques. Our products of ceramic filter plateare in good quality and in best price.
- Q: How many degrees does the ceramic filter melt?
- Alumina made from tabular corundum can be used over 1800 degrees!SiC if there is atmosphere, protection will be higher, there is no atmosphere protection, because the existence of oxidation, generally not more than 1600.Corundum, mullite, 1750 degrees small meaning.
- Q: What's the reason for high water content in filtration copper concentrate?
- Ceramic filter plate1) the service life of the ceramic filter plate has arrived.2), ceramic filter plate uneven in quality on the market, the production capacity of some ceramic products difference (table mask size is too large or pore size uniformity is poor as a result of suction effect is poor, short life), but the price is low, but some users in order to reduce the operation cost of ceramic machine, tend to choose low price the ceramic plate, sometimes a ceramic machine ceramic filter plate with several may be different, so do not get the expected effect in normal use.In addition, the concentrator slurry, especially metal slurry, is very powerful on the wear of ceramic filter plate, the mechanical strength and wear resistance of ceramic filter plate requirements (corundum has high mechanical strength, good abrasion resistance, especially suitable for metal slurry dehydration).When selecting ceramic filter boards, these two points should be taken as a reference.
- Q: Can the plate filter press pass through the filter plate?
- There are many types of pumps to be used, such as screw pumps, slag pumps, rotary pumps, piston pumps, and diaphragm pumps.
- Q: The use of water glass as beneficiation agent, copper concentrate in the ceramic filter can not filter, how to do?
- As everyone knows, ceramic filter medium is a ceramic filter plate, microporous ceramic filter plate with a lot of distribution from the outside to the inside capillary effect, its mechanism is based on the capillary effect of microporous ceramic filter, filtration, the filtrate (generally refers to water) through these pores under the action of the vacuum suction pump, filter cake is trapped on the surface of the ceramic filter plate.
- Q: How much is the accuracy of 50nm ceramic membrane filtration?
- 50nm refers to the nominal pore size, but it does not mean that the holes in the ceramic membrane are 50nm, but the approximate number of holes. The size of the pores may be between 40~60 and 45 to 55nm. Generally introduced, annotated range, you can also own to detect.
- Q: Does the ceramic factory use hydrochloric acid?
- For the use of a long time, the method 1, the effect is still no significant improvement, that is how to plug the ceramic filter plate regeneration? The ceramic filter plate with uneven or non sucking slurry can be removed, and oxalic acid or other acid liquid with certain concentration and certain temperature can be taken together to dredge the microporous of the ceramic filter plate. (do not recommend sulphuric acid)
- Q: What is the reason that ceramic filter does not absorb mineral powder?
- One is leakage, two is no liquid output or output weakness, pressure is too low, cleaning effect is not good, the pressure is too large, will cause damage to the filter plate and reduce the slurry concentration. The recoil pressure is regulated by the pump loop valve and the pressure regulating valve.
- Q: Ceramic filter ceramic plate blockage, productivity reduction, how to clean, to achieve the best effect cleaning problems
- Replace ceramic filter plate:Different users because of pulp particle size and different characteristics, the service life is long and short of ceramic filtering plate. For the use of a long time and after the method 1 and 2, the effect of slurry suction is still very poor, we should consider replacing the new ceramic filter board.
- Q: What are the functions of honeycomb ceramic filters?
- High quality and high density straight hole mesh, the product has high heat resistance and impact resistance properties of cast high fever temperature, design straight hole to guarantee the balance between strength and flow, effectively remove impurities and slag particles, the mechanical properties of casting, the surface quality and the qualified rate of products is greatly improved.
- Q: What is the backwashing pressure of the ceramic filter?
- The working process of ceramic filter is: suction - drying - unloading - backwash - suction - drying - unloading - backwash...... In circulation, suction, the drying process is to make the slurry liquid by vacuum suction and capillary effect (usually water) through the filter media from the left, the filter cake on the filter medium (the two processes like syringe pumping), and then through the scraper discharge, after unloading, ceramic filter machine is complete a cycle in the absorption slurry, drying process, some fine particles may enter the filter medium or stacked on the surface (a lot of pipeline internal filtration medium ceramic filter plate), these small particles blockage will make the filter medium permeability and filtering effect of the loss from the poor, in order to reduce the possibility of blockage ceramic filter, will enter the backwash (this process is like a water jet injector). Ceramic filter backwash is through the pressure of water, these small particles plug discharge ceramic filter board.
1. Manufacturer Overview
| Location | Shandong, China |
| Year Established | 2002 |
| Annual Output Value | Below US$1 Million |
| Main Markets | Asia;America; Africa; Europe; and so on |
| Company Certifications | Quality management system certificate |
2. Manufacturer Certificates
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period |
3. Manufacturer Capability
| a) Trade Capacity | |
| Nearest Port | Qingdao |
| Export Percentage | 1% - 10% |
| No.of Employees in Trade Department | 21-50 pepole |
| Language Spoken: | English; Chinese |
| b) Factory Information | |
| Factory Size: | About 230,000 square meters |
| No. of Production Lines | 37 lines |
| Contract Manufacturing | Design Service Offered |
| Product Price Range | Average |
Send your message to us
Ceramic Filter Plate 1 - High Quality Ceramic Filter Plates
- Ref Price:
-
- Loading Port:
- China Main Port
- Payment Terms:
- TT or L/C
- Min Order Qty:
- 100Pcs pc
- Supply Capability:
- 2000Pcs Per Month pc/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
