Stainless Steel 5 Gallon Bucket

Hot Products

FAQ

Selection criteria of oil filter for power plant
Types of filtered oils;Oil contamination, if it is water, or containing impurities, water content, impurities and so on;
Can hydraulic oil filters change color after filtration?
Can only become shallow, because part of the color is suspended particles, impurities caused by some of the high temperature oxidation, chemical properties change, filtration is physical, how can I do?!
Is the pressure type oil filter better than the vacuum oil filter?
The pressure type oil filter doesn't have a vacuum oil filter
Who knows what the vibration of the oil filter is?
Generally, the vibration of oil filters is very harmful: vibration, noise, accelerated wear of bearings, shortening of mechanical life, and serious damage accidents.There may be four reasons:1, the anchor screws loose. Solution: just tighten it2, the uneven thickness of sludge. Solution: clean the residue
Can vacuum turbine oil filters be used to filter transformer oils?
But for a turbine oil and transformer oil are not the same, the quantity of the water is not the same, generally require a relatively high water content in transformer oil to meet the general requirements of minimum 30ppm, otherwise easily lead to the breakdown of transformer, transformer directly lead to system failure and damage, and even lead to accidents. The general steam turbine oil (turbine oil) as long as the water content dropped to about 50ppm qualified, so that the two kinds of oil requirements are not the same. Transformer oil filter requirements are high, turbine oil filter requirements are lower, with low requirements to filter high requirements, may not be able to meet the transformer oil standards.
When the centrifugal oil filter is used to filter peanut oil, the oil color is black and cloudy. What's the matter?
The specific added value depends on the amount of phospholipids in the oil. You can try a small amount of filtered oil and filter oil to determine the ratio of water to oil.
Operating principle and characteristics of electrostatic oil filter
The principle of electrostatic oil filter on the basis of attraction, using the Z potential of oil and water, colloid impurities, mechanical impurities and other impurities particles are different, when the impurity particles with the oil flow to the high pressure electrode plate, which quickly swim towards the opposite electrode direction, and is attached to the filter dirt between the upper electrode plate. At the same time, under the influence of static electricity, the impurity particles attached to the dust filter can also attract other impurity particles like the iron filings in the magnetic field. The separation principle has nothing to do with the size of the pollutant, but is related to the Z potential of the separated object.
Which is better, the plate type oil filter and the vacuum oil filter?
Research from the user perspective, centrifugal oil production machine is through the drum of high-speed rotation of the centrifugal force generated by the oil fine filter, need water treatment in oil dregs to absorb water becomes heavier, water quality after the diesel oil, the lightest, slag, water, oil natural three layer is formed on the inner wall of the drum rotating at high speed the.