Woodworking Band Saw Machine Effectively in Processing Wood
- Loading Port:
- Guangzhou
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 set
- Supply Capability:
- 1000 set/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Woodworking Band Saw Machine Effectively in Processing Wood
Main Structure Of The Machine:
This machine from the body, working platforms, the upper and lower saw wheel body, the upper and lower saw card device such as security cover and transmission parts.
Use of the machine:
This machine is mainly used for wood vertical saws, horizontal saw all kinds of Square-edged Timber and plates, also applies to non-metal-like plastic, nylon sawing.It is suitable for all kinds of wood processing plants, such as furniture factories, board box factory, wood thread factory, wood-mode manufacturing and construction technology, etc.
Main Specification And Technology Parameter:(Normal Type)
Model | MJ345/MJ346 | MJ316A/MJ316D | MJ318/MJ319 |
Saw wheel Dia. | 500mm/600mm | 610mm/620mm | 800mm/900mm |
Width of sawing woof | 450mm | 400mm/350mm | 350/400mm |
Height of sawing wood | 150mm | 300mm/350mm | 400/600mm |
Cutting speed of saw band | 20m/sec | 21.3m/sec 27m/sec | 30.14m/sec 34m/sec |
Rotary speed of saw wheel | 780r/min | 680r/min 830r/min | 720r/min |
Adjustable angle of worktable(LXW) | 0-45degree | ||
Max size of worktable( | 540X570mm | 780X700mm/840X750mm | 800X750mm/830X780mm |
Motor power/Voltage frequency | 2.2kw(3HP) / 380V 50Hz | 4kw/7.5kw(5.5/10HP) / 380V 50Hz | 11kw(15HP) / 380V 50Hz |
Weight of machine | 300kg/850kg | 850kg | 980kg/1100kg |
Overall dimensions | 860X700X1900mm | 1600X1200X2050mm | 1700X1350X2350mm/ 1750X1400X2750mm |
Main Specification And Technology Parameter:(With sliding table type)
Model | MJ316DT | MJ318T | MJ319T |
Size of sliding table(LXW) | 2800X377mm | 3200X367mm | 3200X367mm |
Saw wheel Dia. | 620mm | 800mm | 900mm |
Max processing length | 2600mm | 3000mm | 3000mm |
Width of sawing woof | 350mm | 400mm | 400mm |
Height of sawing wood | 350mm | 600mm | 600mm |
Cutting speed of saw band | 27m/sec | 34m/sec | 34m/sec |
Rotary speed of saw wheel | 830r/min | 720r/min | 720r/min |
Max size of fixed worktable | 830X350mm | 790X380mm | 790X380mm |
Motor power/Voltage frequency | 7.5kw(10HP) / 380V 50Hz | 11kw(10HP) / 380V 50Hz | 11kw(10HP) / 380V 50Hz |
Weight of machine | 1150kg | 1300kg | 1400kg |
Overall dimensions | 2870X1850X2750mm | 2870X1850X2750mm | 2870X1850X2750mm |
Model: MJ345/MJ346 worktable may tilt 0-45 degree.
- Q: This is the following plate, do not want to use PVC or aluminum edge, too ugly, there is no paint or putty kind of things, can maintain wood color better?Ash integrated plate edge treatment, do not scratch putty directly do varnish okay?
- Mongolian pine Oh, Hei hei do not need to deal with it
- Q: Can the kitchen cabinet carbonization door plank do the acrylic edge banding? Optimistic about a set of kitchen cabinets, aluminum alloy plate, carbonized board. I don't like aluminum alloy hemming. Optimistic about color and brightness of carbonized board. Do not know the carbonized board is good to do acrylic edge?
- The landlord is a bit difficult, because the carbonization plate hardness is relatively high, with normal cutting devices to avoid cutting edge collapse, so usually used to wrap aluminum edge chipping, aluminum edge back hook part can cover up the small, if you want to use acrylic edge would need very good cutting equipment, and sealing machine requirements are relatively high, in the edge sealing machine before the first clear edge, also will bring the edge collapse, so unless there are special equipment manufacturers can do.
- Q: Is there any good sealing method for paint free door?
- Custom made factory size has been sealed according to your required size.
- Q: The attic is covered with a multilayer board that needs cutting and the cut part needs to be coated with edge coating.What kind of paint is it with edge coating? Ordinary alkyd paint, okay? Or special carpentry paint?
- It's a kind of wood paint
- Q: Cabinet edge quality, how to identify?
- Generally divided into two parts, one is the appearance, this is intuitive, the second is to look at the quality of assembly, this is the PVC edge or Aluminum Alloy edge, PVC is adhesive quality, Aluminum Alloy is the first installation slot size is fastened, followed by adhesive, the edge is Aluminum Alloy knowledge, the auxiliary effect of adhesive.
- Q: What's the adhesive tape for the desk edge? What glue do you use?
- Structural adhesive, carpentry glue
- Q: How do you close the wallpaper?
- It doesn't have to be sealed. Anything is OK if you want to. The frame bar is ok. Of course, the nail is the best. Glue and nails are usually used. The bar nails should be placed under the bar at the beginning of the bar. Then nail the frame and use the nail. Small nail. Not obvious... The best way is to use nail board brace. Then the upper panel. Ready to paint or paint free..
- Q: How to correctly use furniture edge hot melt adhesive
- The use of edge sealing adhesive should first be divided into machine, manual machine - low temperature edge banding adhesive. Semi automatic machine - medium temperature glue, automatic machine - high temperature edge banding glue; and there is to choose the appropriate glue according to the thickness of the edge banding, the season and environment will also affect the use of edge banding adhesive.
- Q: Why does our family seal edge fall off, cabinet experience deformation?
- A whole wardrobe is good, and its edge is also very important. Edge sealing is good, directly affect the cabinet deformation. Small manufacturers and small workshops are not, and basically the use of artificial sealing edge, sealing effect is poor, and even fall off, deformation, affecting the normal use of the wardrobe. I saw Elijah, edge line, edge machine good estimation.Cabinet deformation, then with the wardrobe plate, door frame and so on, as well as the assembly is not closely related. In small factories or small workshops produced wardrobe, prone to Jerry built, wardrobe panels, door frames thickness does not meet the standards, assembly does not meet the specifications, and even cabinet size is too large or small. So out of the so-called whole wardrobe, of course, may be deformed and twisted.
- Q: How should the reinforcing rib of the reinforcing bar of the cap be arranged?
- First, according to the specifications, as follows:Specification: 4.2.3.2 under column independent pile cap workingreinforcement should pass configuration. The rectangular reinforcement plate should be evenly arranged according to the direction of both sides. The diameter of the steel bar should not be 10 small, and the spacing should be 100 ~ 200mm. For the three pile caps, it should be evenly arranged according to the direction of the three plates, and the three steel bars intersected at the bottom shall be within the scope of the column section. ? ?Two, reference specification:Technical specification for building pile foundation and standard atlas of reinforced concrete circular pile caps.
Send your message to us
Woodworking Band Saw Machine Effectively in Processing Wood
- Loading Port:
- Guangzhou
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 set
- Supply Capability:
- 1000 set/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords