Woodworking Band & Saw Machine used for Wood Vertical Saws
- Loading Port:
- Guangzhou
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 set
- Supply Capability:
- 1000 set/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Band Saw Machine
Main Structure Of The Machine:
This machine from the body, working platforms, the upper and lower saw wheel body, the upper and lower saw card device such as security cover and transmission parts.
Use of the machine:
This machine is mainly used for wood vertical saws, horizontal saw all kinds of Square-edged Timber and plates, also applies to non-metal-like plastic, nylon sawing.It is suitable for all kinds of wood processing plants, such as furniture factories, board box factory, wood thread factory, wood-mode manufacturing and construction technology, etc.
Main Specification And Technology Parameter:(Normal Type)
Model | MJ345/MJ346 | MJ316A/MJ316D | MJ318/MJ319 |
Saw wheel Dia. | 500mm/600mm | 610mm/620mm | 800mm/900mm |
Width of sawing woof | 450mm | 400mm/350mm | 350/400mm |
Height of sawing wood | 150mm | 300mm/350mm | 400/600mm |
Cutting speed of saw band | 20m/sec | 21.3m/sec 27m/sec | 30.14m/sec 34m/sec |
Rotary speed of saw wheel | 780r/min | 680r/min 830r/min | 720r/min |
Adjustable angle of worktable(LXW) | 0-45degree | ||
Max size of worktable( | 540X570mm | 780X700mm/840X750mm | 800X750mm/830X780mm |
Motor power/Voltage frequency | 2.2kw(3HP) / 380V 50Hz | 4kw/7.5kw(5.5/10HP) / 380V 50Hz | 11kw(15HP) / 380V 50Hz |
Weight of machine | 300kg/850kg | 850kg | 980kg/1100kg |
Overall dimensions | 860X700X1900mm | 1600X1200X2050mm | 1700X1350X2350mm/ 1750X1400X2750mm |
Main Specification And Technology Parameter:(With sliding table type)
Model | MJ316DT | MJ318T | MJ319T |
Size of sliding table(LXW) | 2800X377mm | 3200X367mm | 3200X367mm |
Saw wheel Dia. | 620mm | 800mm | 900mm |
Max processing length | 2600mm | 3000mm | 3000mm |
Width of sawing woof | 350mm | 400mm | 400mm |
Height of sawing wood | 350mm | 600mm | 600mm |
Cutting speed of saw band | 27m/sec | 34m/sec | 34m/sec |
Rotary speed of saw wheel | 830r/min | 720r/min | 720r/min |
Max size of fixed worktable | 830X350mm | 790X380mm | 790X380mm |
Motor power/Voltage frequency | 7.5kw(10HP) / 380V 50Hz | 11kw(10HP) / 380V 50Hz | 11kw(10HP) / 380V 50Hz |
Weight of machine | 1150kg | 1300kg | 1400kg |
Overall dimensions | 2870X1850X2750mm | 2870X1850X2750mm | 2870X1850X2750mm |
Model: MJ345/MJ346 worktable may tilt 0-45 degree.
- Q:Can there be less or no addition of lead stabilizers in the PVC banding? Is there a replacement? Because China's ROHS on lead, chromium, mercury, cadmium content requirements.Is it possible to produce edge banding products that meet the requirements of ROHS? Around Beijing
- Colored or colored; may addIn addition, PVC has lead when it is formed so that it is convenient for operation
- Q:This picture belongs to the floor wall of the living room on the floor tiles and living rooms.. Excuse me, how about the edge of the floor tile on the left side of the drawing in the construction? On the right side of the floor tile is posted on the mat
- Floor tiles on the wall sealing method: you can use gray grinding, can also be installed on the ceiling, will be covered above.Edge banding: it is mainly used for pasting and decorating the edges of solid wood furniture, and can only be operated by hand. Paste wood edge adhesive is a water-soluble adhesive or strong adhesive paste, as long as the edge of the plate profile is flat on the line, there is no specific requirements in the environmental temperature.Because wood is a hygroscopic material, the influence of water content will be affected by the outside temperature and humidity changes, therefore, the choice of adhesive should be based on the seasonal changes and moisture diffusion and penetration requirements.Only by mastering the adhesive selection, in order to make the edge plate through the wood fiber to form cement penetration rivet good fixation "". In addition, furniture decorated with wooden edging strips must be painted with surface paint.
- Q:How should the reinforcing rib of the reinforcing bar of the cap be arranged?
- First, according to the specifications, as follows:Specification: 4.2.3.2 under column independent pile cap workingreinforcement should pass configuration. The rectangular reinforcement plate should be evenly arranged according to the direction of both sides. The diameter of the steel bar should not be 10 small, and the spacing should be 100 ~ 200mm. For the three pile caps, it should be evenly arranged according to the direction of the three plates, and the three steel bars intersected at the bottom shall be within the scope of the column section. ? ?Two, reference specification:Technical specification for building pile foundation and standard atlas of reinforced concrete circular pile caps.
- Q:How to seal the homemade panel furniture?
- Buy banding strips and glue them vigorously.
- Q:PVC what's the glue for the edge banding?
- Some plants use glue glue, some glue with hot melt glue, glue we have, welcome to contact
- Q:TV background wall mosaic tile, generally with what material edge, edge with what do not want to use the artificial marble, feeling too heavy, too Chinese
- Edge can be used stone lines, wood lines, gypsum lines, titanium, stainless steel. Look at the effects of your collocation.
- Q:Do medals, wooden doors, heat transfer, edge banding machine, which sell well? Quality assured? Good after-sales service?
- Of course, buy thermal transfer sealing machine for Qingdao Sanlong Precision Machinery Manufacturing Co Ltd new thermal transfer cylinder edge tracking hot stamping, no matter how thick transfer finished debugging of the door, are required to adjust, with a door device film can save 4-5 yuan hot stamping film, welcome you to visit the former boss Tel: 18562586086 Mr. Zhao
- Q:The main reasons of edge banding degumming
- One is aging, two is bad installation, and three is poor quality!!
- Q:Solid wood flooring is necessary waterproof paint edge?
- It is necessary that the floor itself is greatly affected by the temperature and humidity of the outside. If there is no waterproof coating, the wet shrinkage will be especially serious
- Q:Is it good to have edge metal or PVC at home?
- The metal is strong and the PVC is worse, but the edges of the PVC will not be scratched
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
Woodworking Band & Saw Machine used for Wood Vertical Saws
- Loading Port:
- Guangzhou
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 set
- Supply Capability:
- 1000 set/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords