Vertical Injection Molding Machine Plastic Injection Machinery TA-400

Inquire Now

OKorder Service Pledge

Quality Product, Order Online Tracking, Timely Delivery

OKorder Financial Service

Credit Rating, Credit Services, Credit Purchasing

You Might Also Like

Main Features of Vertical Injection Molding Machine TA-400

- Vertical four-column clamping
- Vertical injection
- Clamping force 12-2000Tons
- Injection Qty 300g-3000g
- Convenient for embedding parts

Parameters of Vertical Injection Molding Machine TA-400

Model	Machine Type	Unit	TA-400
Injection System	Screw Diameter	mm	28	32	35
	Injection PreDSure	kgf/cm²	2332	1792	1494
	Theoretical Injection Volume	cm²	98	128	153
	Max.Shot Weight(PS)	g/oz	103/3.6	134/4.8	160/5.7
	Injection speed	cm/s	6.4
	Number Of Temperature Con	zone	3
clamping system	Clamping Force	kn	400
	Distance Between Tie Bar	mm	410x250
	Top Platen Size	mm	555x380
	Bottom Platen Size	mm	580x420
	Min.Mold Height	mm	195
	Opening Stroke	mm	200
	Max.Opening Distance	mm	395
	Ejector Force	kn	22
	Ejector Stroke	mm	35
Hydraulic power system	Max.Hydraulic Preesure	kgf/cm²	140
	Oil Tank Capacity	L	180
	Pump Motor Power	kw	5.5
	Barrel Heating Power	kw	4.2
	Total Wattage	kw	9.7
Others	Machine Weight	kg	1600
Others	Machine Dimensions	m	1.7x1x2.3

Pictures of Vertical Injection Molding Machine TA-400

Vertical Injection Molding Machine Plastic Injection Machinery TA-400

Q: What is the percentage of nozzles in injection molding machines?: According to the 100 degree metaphor, the setting 50% is 50 degrees

Q: press feeding button feeding, injection machine has been feeding, storage position to still can not stop why, 15With electronic ruler control, is there an electronic ruler problem, how to judge?: How do you determine that the feed has reached the end of the storage? Whether from the display page screw actual position to the target location is to determine if, please check whether the charging valve is electrified,

Q: What brands of injection molding machines are there in Taiwan?: Taiwan Yasu, Zhenxiong Taiwan, Taichung, quanlifa, fuqiangxin, brand of plastic injection molding machine to query.

Q: What kinds of oil are used in the injection molding machine?: If there is a gear box to use gear oil. All in need of injection molding machine lubricating oil: hydraulic oil, gear oil and hydraulic oil: cuori HM anti-wear hydraulic oil, No. 46, Pu HM hydraulic oil 46 HF-2 hydraulic oil - 46 replacement cycle: a few months. Use time, the answer is basically oil dirty, and other parts of the bearing grease, water, cleaning oil. Recently I went to see many customers, plus two main tanks. Wait, use No. 68 anti-wear hydraulic oil. Hydraulic oil。The exchange of trouble. Why change the oil and so on?,There are also die-casting, oil change time, we are not sure, the general minicomputer is a fuel tank. The machine has instructions.

Q: What should be noticed before the machine is stopped when the injection machine is finished?: 1, stop feeding (feed off the front barrel, the barrel bottom) has been playing in the finished material2 shut down mold cooling water before stopping,3, press the manual (if not change the mold, stop the mold to the low pressure position, protect the mold)4, mold spray rust inhibitor5, turn off the electric heat6, turn off the power7, cleaning machine sanitation

Q: Ready to open a small injection molding plantThere are only two machines at the moment, one 160T, one 250TProducts are note PA, PP, PU round (3, 4, 5 inches through)I would like to help you count, if 2 machines 24 hours boot, a month down, the output value of these 2 machines about how much? Thank you, the best way to calculate ~ ~!: Able to save 1/4 of electricity5 inches with 250T machine to produce, use the mold should be 1 out of 4, cycle count 50 seconds, too specific I don't know how, I just need to calculate method and approximate output value! Because we shipped here, probably a few days 45 to 90 days, I want to see enough money flow! That's the way it is, huh?! --------------------------- know this product with what material, if the PA is up to 30 seconds, you said the other 2 material may be 40 seconds, I didn't see products not determined.

Q: What is the problem of Shanghai plastic injection molding machine in the die closing process?: Solenoid valve installed wrong, or out of the oil path is simple along the road, and the solenoid valve is connected to reverse.

Q: What is low voltage protection (injection molding machine)?: Protect the mold. Never press dies during production

Q: Advantages and disadvantages of horizontal injection molding machines and vertical injection molding machines?: 1. horizontal machine has the advantages of high operation, convenience, high safety performance, large bearing size and so on. The disadvantage is that the floor space is large and the price is relatively high. Suitable for medium and large moulds.2. vertical machine has the advantages of small footprint, relatively low prices, shortcomings, such as high gravity, inconvenient to take parts, etc., suitable for small molds.

Q: Is this an injection molding machine?: introduceInjection molding machine, also known as injection molding machine or injection machine, many factories called Ji (PI machine), injection products called beer pieces. It is a thermoplastic or thermosetting material using plastic molding mold made of plastic products of all shapes of the main molding equipment. The injection molding machine can be divided into vertical, horizontal and vertical composite according to the arrangement of injection device and mould locking device.

Send your message to us

*Email

*TEL

*Quantity

*Unit