Supply China Iec Approval Computer And Inspection Equipment Cable
- Loading Port:
- Qingdao
- Payment Terms:
- L/C, T/T
- Min Order Qty:
- 1000000 meters kg
- Supply Capability:
- 5000000 meters per Month kg/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
China IEC Approval Computer and Inspection Equipment Cable
Detailed Product Description
The computer and inspecting Equipment cables are suitable for anti-jamming places and anti-jamming machines and equipment.
1. Brief introduction
The computer and inspecting control cables are suitable for anti-jamming places and anti-jamming machines and equipments
2. Use conditions
(1).Rated Voltage: uo/u 300/500V
Long term working temperature:PVC cable:70oC and 105oC,PE insulated cable:70oC
(2).Min laying temperature:fixed laying -15oC nonfixed laying -10oC
(3).The min curving radius:copper tape screened cable and steel tape armored cable should be at least 12 times the outer diameter.other cable should be at least 6 times the outer daimeter.
(4).According to the standard of GB/T 18380.3-2001 Burning test under the condition of burning,Part III:The burning test of bundle wires or cable
3.Products
List of cable types
Type | Name | Main Usage |
JVV | Copper conductor PVC insulated PVC sheathed inspecting equipment and computer control cable | Be fix laid indoors,in cablespit.pipe and other places where shield is not required. |
JYV | Insulated PVC sheathed inspecting equipment and computer control cable | |
JVVP | Copper conductor PVC insulated PVC sheathed braiding screened inspecting equipment and computer control cable | |
JYVP | Copper conductor PE insulated PVC sheathed braiding screened inspecting equipment and computer control cable | Be fix laid indoors,in cable pit,pipe and other places where shield is required. |
JVPV | Copper conductor PVC insulated braiding screened PVC sheathed inspecting equipment and computer control cable | |
JYPV | Copper conductor PE insulated braiding screened PVC sheathed inspecting equipment and computer control cable | |
JVVP2 | Copper conductor PVC insulated PVC sheathed copper tape screened inspecting equipment and computer control cable | |
JYVP2 | Copper conductor PE insulated PVC sheathed copper tape screened inspecting equipment and computer control cable | |
JVPVP | Copper conductor PVC insulated braiding screened PVC sheathed braiding screened inspecting equipment and computer control flexible cable |
Why we choose Okorder.com?
Okorder.com is a professional and reliable online E-market place
Providing a variety of products with reasonable prices
High quality goods provided by factory suppliers
Shipping to over 200 countries.
One-stop sourcing
Dubai Logistic Complex
Okorder Quality Control?
We hold a very strict quality control system to check every connector of our products for your safety.
Okorder services for you
1.7*24 hours Hotline & Email Service
2. Your inquiry related to our products or prices will be replied in 24hrs.
3. Well-trained and experienced staffs to answer all your enquires in fluent English
4. OEM&ODM, any your customized demand we can help you to design and put into product.
5. Distributor ship are offered for your unique design and some our current models
- Q:So I had this monitor I used to use, then didn't use it for a while, now I want to use it again but can't find the power supply cable. I can get a new one, but the thing is I have to know what to ask for, right? I don't know what cable to ask for. I did some google search on it too but still can't seem to find exactly the type of the cable that is specified. Help? Can someone do it for me so I can go to my local electronics score and look for a cable that will do the work?
- yeah man, that 3 prong cable is synonomous with pc's, i used a old imac cable for the longest time because it looks rad.
- Q:This is the second time the power cable has burned up. The cable itself frayed from overheating I suspect.
- It would have to be a combination of things that made it fray. Like, for example, being bent at an extreme angle while in use for long periods of time. Power cables get hot from normal use. The plastic insulation gets soft. If the power cable is laid in a comfortable position, if it is allowed to cool before being wrapped up, and there are no problems with the power adapter port on the laptop, a power adapter cable will last for the life of the laptop. Now, if you are using a Universal power brick, that is part of your problem. This laptop only requires a 65 watt adapter. Universal power adapters will push more juice to your laptop... up to 90 watts. This will cause the cables to get hotter. So, if you have not replaced it with a 19 volt 3.42amp brick specifically designed to work with your laptop... then you should do so. And feel free to buy one off OKorder. Same brick as what you get from Toshiba, for a fraction of the cost. end of line
- Q:I have 8x220ah deep cycle car battery's at 12v and i wanted to run an 5kw 12v power inverter but i would need cable which is 400amp 12x4004800 so could i use two cable connected to the battery's and split the power into 2 cable or would this not work if so whythe inverter would be using 400amps from the battery and it would be supplying 20amps at 240voltsis my working out correct
- In this case, you should have put the batteries in series to get 48 or 96 volts, that makes the cabling easier. Too late now. Yes, at 5kW, that is 5000/12 420 amps I don't know what size wire you are using, and what the distance is, so I can't help further without that information. For example, if you are running 10 feet of cable (20 total) and you want to lose only 5% of the voltage, which is 0.6 volts, then the resistance of the wire needs to be less than 0.6/420 1.4 mΩ. That is, over 20 feet, 71 mΩ per 1000 feet, which is 000 AWG wire. Mush more than 10 feet, and you need to use MCM wire. .
- Q:Trying to troubleshoot my computer I have been unplugging and replugging wires. After a while of looking around I have found that the ATX power connector is missing a part of the pin. Now my computer is unable to boot. Is there a way to fix it. Or am I stuck going to get to a new computer.
- are u talking about the 4 pin connectors on the power supply if so there should be more then 1 and interchangehable. if your talking about the pins on the ide cable slot on the board then u might be able too straighten them with tiny needle nose pliers or jewelers screw driver but be very careful u break a pin the board is done.if u can maybe be more specific ill try too help!!!!!!!!!!
- Q:my friend has a ps2 and i don't know which one hes got either the fat or the slim and i think the power cables for the fat and the slim are differnt so does the ps3 slim power cable work on any of them?
- Ps3 Cords
- Q:I need to run power cables from 4 fans on my stacker 830 around the edges of the case and into the power supply for cable management purposes. The fans I currently have, have power cables that are around only 10 inches long. Any ideas?
- Can you solder? If so, just clip the wires then splice on extensions. Add heat-shrink material, solder connections, shrink the material and you're good to go.
- Q:I dont get any power to my amp. If something is pinching the line could that make it not get any power? Or could there be something else wrong?
- Any thing is possible. You can have a break in the wire (any where). But normally the kink won't do anything (good or bad). Good luck........
- Q:on a 600 watt amp will it blow my amp?
- You won't have a problem using a 1200 watt wiring kit power wire. Usually it says 4 gauge but it really be 6 gauge in a 4 gauge installation. There are only a few companies making real 4 gauge power wire, if you take a cheap brand 4 gauge wire and hold it with a more expensive brand wire you will see the difference! But to get back on track 4 gauge wire is the best wire to use on any install cause its not too big and not too small, just make sure you hook a fuse! Good luck!
- Q:Is it? I leave the power cable for hours when at home, when letting it process video and such and sometimes drain the battery when not used much.Thanks for any help.
- Your battery life will be reduced if you don't exercise your battery regularly by allowing it to drain and charge completely. It is recommended that you deplete and fully charge the battery at least on a weekly basis to help maintain good battery performance.
- Q:what would happen if i used a 10 guage power cable on a 2400 watt amp, would it blow the fuse of would the amp just creat less power? thnx
- The wire will melt and possibly short out to metal if you pull too much current, which you probably will do with 2400 watts. 10 AWG is only good for 30 amps,
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
Supply China Iec Approval Computer And Inspection Equipment Cable
- Loading Port:
- Qingdao
- Payment Terms:
- L/C, T/T
- Min Order Qty:
- 1000000 meters kg
- Supply Capability:
- 5000000 meters per Month kg/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords