Solid and Grooved Waterproof Garden WPC Deck Tile
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 300 g/m²
- Supply Capability:
- 10000 g/m²/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
1> What is WPC?
WPC, simply for wood plastic composite.
Wood Plastic Composite is made from a unique combination of plant fiber and recycled plastic
according to high-tech formula.
It offers the best advantages of plastic and wood. The plastic shields the wood from moisture and
insect damage, and the wood protects the plastic from UV damage and gives you a natural feel.
It has characteristics of high strength and rigidity, acid and alkali resistance, corrosion resistant
and without formaldehyde, it is a real green environment protection building material.
2> What’s WPC used for?
WPC can be used for military equipment, urban utilities and landscaping, architecture,
gymnasiums, outdoor decking, fencing, pallets, indoor and outdoor decoration.
FAQ
3> Why choose WPC decking?
*Natural colour
*Slip resistant
*Resistance to water, rot and crack
*Guaranteed to last
*Low maintenance
*Beautiful and broad range of finish
4> What are the main kinds of WPC currently?
*WPC decking board
*DIY decking board
*WPC wall panel (wall cladding)
*Garden fence (railing)
*WPC outdoor furniture (gazebo, pavilion, outdoor desk&chair, dustbin, pet house…)
5> Ingredients of WPC?
30% HDPE+60% bamboo/wood fiber+10% Chemical additives.
6> How’s WPC made?
7> Specification of WPC?
A. Weatherability
suitable from -40° C to +60° C, UV resistance
B. Test Data
| Testing Item | Technical Requirements | Value of Test |
| Water Content % | ≤2 | 0.4 |
Rockwell Hardness (HRR) | ≥60 | 80 |
Thickness Swelling after Water Absorption (%) | ≤1 | 0.2 |
Screw Holding | Surface of board ≥1300 | 3870 |
| End of board ≥1200 | 3460 | |
Static Bending | ≥20 | 28 |
Bending Elastic | ≥1800 | 4610 |
Abrasion | ≤0.08 | 0.06 |
Hammer falling impact in low temperature, broken (pcs) | ≤1 | 1 |
State after Heating | No babbles, cracks and pockmarks | - |
Rate of Size Change with Heating (%) | ±2.5 | -0.38~-0.45 |
Report Number: 201107126
Type of sample: 90x25x820mm, Solid
C. Surface treatment
D. Main colors available:
charcoal-black; classic-white; rinforest-canopy;sand-castle; stepping-stone; tree-house; vintage-lantern .
E. How to install
Company Information
8> About CNBM and It’s WPC products
China National Building Material Corporation (CNBM), long history since 1984 is one of the top
fortune 500 corporation and central enterprise with total assets of more than $20 billion and
120,000 staff.
Our unique advantages:
* Preferential payment terms
* Good and reasonable price
* Quality guarantee -- CNBM won't let a single small deal ruin our reputation and brand, so quality is
our lifetime.
* Professional team for CRM order processing & QA & logistics
*Global logistic database, originated from Dubai
- Q: I just had laminate floors installed and I've read many dfferent answers on the best wat to maintain them. I need advice
- Anything will work but don't flood the floor with water. The surface is sealed but the joints are not.
- Q: Hi!When we use floor(a) in MatLab, it's returned the biggest integer smaller than a.But when we type "floor a" or any other letter without parenthesys, another crazy integer is returned. Try "floor z", "floor r", etc., and you'll see.What does this integer mean?
- This Site Might Help You. RE: MatLab: what does "floor a" mean? Hi! When we use floor(a) in MatLab, it's returned the biggest integer smaller than a. But when we type "floor a" or any other letter without parenthesys, another crazy integer is returned. Try "floor z", "floor r", etc., and you'll see. What does this...
- Q: I have just brought a new Reef tank and want to know if my floor can take the wieght?The sizes of the beams under my floor are 2.5inch by 7inch by 216inch (18ft) The size of the base of the tank is 30inch by 18inch and will weigh 280kg max It will be next to a concrete wall and be parallel with the beams and be resting over two beams. Thanks for any help guys and girls
- You must be able to find the joists and they'll be 16 inches apart on center - so you'll have to put your tank just 1 inch out from each joist! Good Luck with that. By putting it close to the wall - you have added strength as the joists are tied into the concrete base of your sub floor.
- Q: Over time I have noticed what appears to be my bathroom tiles moving out of place, as if the floor is slowing caving in. I do have an older house and there has been water leakage from the bathtub into the kitchen that has since been fixed. My question is what kind of professional do I call to take some look at my bathroom floor/kitchen ceiling for repair?
- the carpenter
- Q: Is it neccessary to prime the floor of an insulated garage before repainting?
- I'm not sure of your exact situation, but when I've seen it done there are several specific steps. First and foremost, you have to be certain no moisture is coming up through the slab. I've read the best way to check is to tape a 3' X 3' piece of heavy (6 mil or so) plastic to the concrete (tape the edges very well so moisture can't escape). Leave it at least 24 hours and see if moisture has collected on the inside. If there is moisture, you'll need to address the moisture problem before you paint or it will just lift/bubble off. If the slab's staying dry, I think you next need to etch with a weak solution of hydrochloric acid, then prime and finally paint. Fine Homebuilding has had a few articles on just this project. Rust-Oleum is selling a kit at Lowe's for this. You don't want to do this lightly and end up with a big peeling mess. Hope it goes well. When they're done right I think it makes a world of difference in not just the appearance but the functionality too.
- Q: How to calculate the general loss of the installation of wood flooring?
- The common specifications of the floor are 900 * 90 * 18mm, 750 * 90 * 18mm, 600 * 90 * 18mm rough calculation method: room area ÷ 0.228 * 1.05 = floor block length 5m, width 3m room as an example: room length 5m ÷ plate length 1.2m = 5 pieces of room width 3m ÷ plate width 0.19m = 16 blocks long 5 blocks * wide 16 blocks = 80 pieces with the total plate Description: composite wood flooring in the pavement often 3% -5% Loss, if the area to calculate, do not ignore this part of the amount. It usually uses a soft floor mat to increase flexibility and reduce noise, which is roughly the same as the floor area.
- Q: how to start add a second floor
- Buy a 2 story house and sell the house you have. Adding a second floor will cost you a ton of money.
- Q: I have a doctors office with vinyl tile floors in the exam rooms and I want the floors to look really clean and shiny. What kind of cleanser is best? Do I need a special machine to buff the floors? If so what kind is good and where can I get one? What kind of regimen is best for cleaning and buffing?
- as funny as it sounds, Windex has been the best thing that has worked for me.
- Q: i live in a first floor new build flat which has concrete floors with wood joists upon it for the floor itself, i wish to install a new aquarium which will weigh roughly 500kg(0.5ton) i already have a 260kg aquarium which i intend to replace with the new 500kg one.It will be placed in the existing space as the old one. I need professional advice after trying engineer forums with no reply. So my question is ? will my floor be safe to hold this weight ?
- You will need to calculate the total load on the floor in that area and how it is distributed. So the length and width of the aquarium together with the weight of the stand, how the load is transmitted to the floor (four legs, a complete plinth, something in-between) will make a difference. Examples: A spinet piano weighs about 140kg and may have a footprint close to your proposed aquarium. Concert-grands can weigh up to 700 kg - but are spread over a much wider area. Water-beds can weigh 600kg, but are also spread over a wide area. You are concentrating concert-grand weight into a spinet footprint. If you have a slab-on-grade as the substrate, you *should* be fine. But there is still too little data here for a definitive answer. If your figures are right - you are stating that you are putting 1,100 pounds of aquarium in an area of two feet by three feet, consider: Clear water weighs about 62.5 pounds per cubic foot. 1,100 pounds of water is 17.6 cubic feet. So, you will have an aquarium that is 2 feet by 3 feet by ~3 feet high. And coming in at 184 +/- pounds per square foot. Would you be uncomfortable standing six adult male individuals in the same space? You are crossing two joists, but you have not specified the span. That you can calculate, and you can also calculate the total load that the joists can carry. And from that you should be able to determine how safe things are. But superficially and with normal residential construction properly installed and to code, you should be fine.
- Q: if this helps my laminate floor is not cheap
- i have laminate floors and my kids spill stuff all the time on them and i use Swifter wet and dry!
Send your message to us
Solid and Grooved Waterproof Garden WPC Deck Tile
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 300 g/m²
- Supply Capability:
- 10000 g/m²/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
