Metalized Film Bubble Laminated Polyiso Roofing Insulation
- Ref Price:
-
- Loading Port:
- China Main Port
- Payment Terms:
- TT or L/C
- Min Order Qty:
- 40HQ m²
- Supply Capability:
- 20 tons/week m²/month
OKorder Service Pledge
Quality Product, Order Online Tracking, Timely Delivery
OKorder Financial Service
Credit Rating, Credit Services, Credit Purchasing
You Might Also Like
1. Specification of Bubble Laminated with Metalized Film
|
STRUCTURE |
MPET /BUBBLE/MPET |
|
THICKNESS |
2.8mm |
|
BUBBLE SIZE |
4mm x 10mm |
|
WEIGHT |
200GSM |
|
REFLECTIVITY |
96-97% |
|
THERMAL CONDUCTIVITY |
0.034W/MO |
|
WATER VAPOUR TRANSMITTANCE |
0.013g/m2 KPA |
|
WIDTH |
1.2m (W) X 40M (L) |
2. Application of Bubble Laminated with Metalized Film
(1). Building reflective heat, cold and hot water pipe insulation;
(2). refrigerator partition, central air conditioning, regrigerator and household applliancs insulation;
(3). Insulation, sold-absorbing, noise reduction and moisture-prooof insulation in the care, train, refrigerator car, laboratory and other industries;
(4). Special product packaging and refrigerated packing and so on.
3. Packaing and delivery of Bubble Laminated with Metalized Film
Depends on the clients' requirements and the production conditions.
- Q: do i have to have insulation in my roof?
- you should have insulation on the attic. ot should be right against the occupied ceilings. The attic cavity needs to be for the most part ventilated. That is a common building approach. Ive seen insulated sheets of plywood the roof shingles are nail to. You can call that roof insulator. You still better off with the common industry approach. Make sure you have an attic fan to level the attic temperature to the outside.
- Q: I have a converted loft which is really cold. The roof doesn't have any insulation, just a waterproof sheet, but i don't want to spend too much insulating it with the proper boards. If i use mineral wool and staple it across the roof trusses will it do a good job?
- Yes, be sure to leave an air space between the top of the insulation and the roof deck to allow for ventilation, and use a vapor barrier on the interior side of the insulation.
- Q: Help please, this home had a water pipe from meter brake in the basement as it was unoccupied/empty, the owner/builder replaced all the drywall, insulation, flooring, carpet, tile, roof, windows, hot water tank, furnace, bathroom and kitchen cabinets, new paint on all, basement ceiling was spray painted black (to hide something or to seal it?). the neighbor says the home was gutted and mold tested three times, its completely redone basically a new home inside, feedback please, it "looks" great
- the only element i will think of of, is your carpet takes up allot of the moisture that comes into your homestead, so given which you took that carpet up, your having extra of a buildup on the tile, even nevertheless the flooring would desire to not be moist, they are nonetheless taking moisture in throughout the air. Bleach will help kill the mould, not on the plant life nevertheless, they make sprays for that at any homestead progression keep. desire this allows.
- Q: Live in Houston, very hot and humid. Looking at adding radiant and additional insulation to roof in house. We have a lot of sun, and AC bills.
- we live in the desert, and got our roof coated, and instantly noticed the difference, it is much more insulated, and provides protection against leak (which was the main reason we had it done)
- Q: 1) What thickness of rigid insulation is used on flat roofs?
- Flat Roof Insulation Thickness
- Q: or in queensland
- I think it is 10 australian doller per hour of 200 sq yd of roofing .It differ state to state
- Q: I live in the top most floor of a flat. Is it worth to insulate the roof (from inside) with styrofoam(thermocole) to reduce the airconditioning load. Is it really economical with respect to cost of insulation and savings gained? Any experiences?
- if u mean roof as just below the shingles this is not recommended as it will cause the shingles to become very hot and prematurely fail,,the best way to lower the heat in an attic is ventilation,,if u have an attic its best to insulate the floor of the attic and lots of ventilation
- Q: Re-roof + gutters + insulationHi. My name is Sean and I live in Adelaide. I want to get rid of my asbestos roof and replace it with a Colorbond roof and new gutters and also R3 ceiling insulation. I've had 1 quote so far for $17,000 total costs, and 1 quote for roof removal only which was $3,300. Does anyone know if I can get a cheaper quote but still get a good job done please?Roof area: 160m2 approx.Gutters: 25 linear metres approx.Capping: 52 linear metres approx.Cheers.
- I am a roof plumber in melbourne I think this is a reasonable price. Materials will cost approx 8000-10000 grand 3300 for asbestos removal and the rest for labour. The best advice is plenty of quotes and keep them to their quotes. If you can get a roll of metal direct from bluescope you can get a company like apex roofing to roll it for you but it is alot of mucking around to save a little bit
- Q: Finally remembering to do so, before my family and I left the house for approximately 4 hours, I turned off the heat before leaving. When we came home I turned it back on, but was shocked to see that the temperature had dropped 4 degrees in that time. 4 degrees in just under 4 hours seems like a lot of heat loss, does it not? I've seen the insulation in our roof and it's just that sawdust looking stuff spread everywhere. I feel like I'm paying a lot of unnecessary dollars for heating: the air does kick on every hour or two and we keep the thermostat at 68.Is it reasonable for me to talk to my landlord about this problem and getting better insulation in the ceiling, and maybe in the roof? (the master bedroom, on the far corner of the house, is always 2-3 degrees below the rest of the house). Are my expectations to not lose a degree of heat or more per hour unreasonable? Would a typical landlord consider this a problem worth discussing?
- The roof (assume pitched) doesn't need insulating it's above the attic above the ceilings of all the rooms that need 12 inch of mineral wool insulation to stop heat loss (you may have less thickness not all insulation is to the correct standards) Also if as I suspect the walls of your home are timber with shiplap (and not solid brick / cavity walls) they also require insulation top up. From a google search there is state wide Government grants for insulating homes, could be available in your state? using blown insulation to walls/ceilings. If you decide to install it yourself the payback is excellent -in 12 months depending on fuel cost and what existing insulation (from your description minimal) The landlord could be entitled to increase your lease costs if he takes the work on as he has greatly improved the thermal insulation which will reduce your heating costs and make his property more valuable to lease.
- Q: We bought a house and put new metal roof on over the shingles. (first please don't say, this or that should have been done, just what I can do now) Any how, we have put a lot of money into the house, roof, all new electrical, all new plumbing, etc., I had to make the house in a "living in condition" with a low budget. ............ the house does not have insulation in ceilings, this has to be done next summer. (budget) Any how, the metal roof has condensation under it, only in the ridge vent area. This drips a little and I need to fix it. Now, I know that insulation wouldprobablyy fix this, but we don't have the money right now, so I need help on what to do? Is there anything that with a $100 to $200 budget can be done? I have searched a little, and maybe use a "spray-on"insulation help? The area is where the gap is at the peak and where themetall overlaps the ridge vent. (I thinkthat'ss what it's called)Thank you! :)
- hope this helps. With more air movement there will not be so much condensation. it is a matter of having an inlet for air or a fan and then an outlet for air. There are small extractor fans i have one for my bathroom, but unsure of the cost.
We are a well-known enterprise specializing in the production and sales of high-grade meltalized film, foil film, foil foam and other composite product.
Since the establishment of our company, we have been devoted to setting up a good reputation in the world.
1. Manufacturer Overview
| Location | Hangzhou, China |
| Year Established | 2006 |
| Annual Output Value | Above US$ 18 Million |
| Main Markets | 10.00% Mid East 15.00% Northern Europe 10.00% North America 22.00% Eastern Asia 7.00% Africa 7.00% Eastern Europe 18.00% Southeast Asia 4.00% Oceania 4.00% Western Europe 3.00% Southern Europe |
| Company Certifications | 无 |
2. Manufacturer Certificates
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period |
3. Manufacturer Capability
| a) Trade Capacity | |
| Nearest Port | Shanghai |
| Export Percentage | 30% - 50% |
| No.of Employees in Trade Department | 20-35 People |
| Language Spoken: | English; Chinese |
| b) Factory Information | |
| Factory Size: | Above 6000.00 square meters |
| No. of Production Lines | Above 8 |
| Contract Manufacturing | OEM Service Offered; Design Service Offered |
| Product Price Range | Low; Average |
Send your message to us
Metalized Film Bubble Laminated Polyiso Roofing Insulation
- Ref Price:
-
- Loading Port:
- China Main Port
- Payment Terms:
- TT or L/C
- Min Order Qty:
- 40HQ m²
- Supply Capability:
- 20 tons/week m²/month
OKorder Service Pledge
Quality Product, Order Online Tracking, Timely Delivery
OKorder Financial Service
Credit Rating, Credit Services, Credit Purchasing
Similar products
Hot products
Hot Searches
