High Quality Asbestos Free Calcium Silicate Boards
- Ref Price:
-
- Loading Port:
- China Main Port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- -
OKorder Service Pledge
Quality Product, Order Online Tracking, Timely Delivery
OKorder Financial Service
Credit Rating, Credit Services, Credit Purchasing
You Might Also Like
Application:
Can be used in washrooms as the ceiling, partition and backer boards. Additionally, Due to the features of fire prevention, thermal insulation, mildew proof and moisture proof, Bestinboards are also applicable to places where high security is needed.
Product Features:
1.Fire-retardant
2.Thermal-insulated
3.Mildew proof
4.Moisture proof
5.Sound insulated
6.Low moisture and water absorption
7.100% asbestos free and other hazardous substances.
Specification:
| Size | Standard Size | Size:1220*2440*4/6/8/9/10/12/15mm |
| Appearance | Surface | Surface:Un-Sanded/Sanded/Polished; |
| Edge | Square/Recessed/ | |
| Physical Properties | Density | 1.2-1.3g/cm3 |
| Bending Strength | Cross > 16Mpa Parallel 60-70Mpa | |
| Moisture Movement | <0.20% | |
| Water Absorption | < 0.1% | |
| Water Contain | <6%(Under EMS condition) | |
| Thermal Conductivity | 0.12-0.15 w/(m •k) | |
| Non-combustibility | GB 8624-2006 Grade A1,CE EN 12467:2012 Grade A1 | |
| Water Impermeablility | Traces of moisture appeared on the under surface of the sheet,but no formation of drops of water on the underside of the sheet after 24 hours. | |
| Freeze-thaw | Not have cracking and layering after freeze-thaw cycles 25 times. | |
| Application | Interior Ceiling,Interior Patition, Bottom Liner | |
| Products Warranty | More than 20 years |
| Raw Material | Content |
| Cement | 44 % |
| Quartz | 44 % |
| Natural Fiber | 8 % |
| Suspension | 4 % |
| Composition of Finished Product | Content |
| Crystalloid of Calcium Silicate | 52% |
| Quartz | 30% |
| Calcium Carbonate | 10% |
| Cellulose | 8% |
Our products
Package
- Q: What are the production methods of calcium silicate board material?
- Calcium silicate (microporous calcium silicate) material and calcium silicate board are produced by static steaming method, dynamic hydrothermal synthesis method and two reaction method.
- Q: What is the maximum temperature at which the glass is cured?
- The softening point of quartz glass is 1600 degrees, it is sodium phosphate and phosphate. Gas burner 1300 degrees, after homogenization processing, after annealing treatment of glass products.
- Q: Asbestos free calcium silicate board there is a crack in the kettle, what is the reason?
- Calcium silicate slab crack (crack was autoclaved late cooling stage, it refers to the irregular surface crack, calcium silicate board, or bright or dark is likely to cause fracture, calcium silicate board, low strength, appearance and performance is not up to the requirements)The main reason for the crack is to cool down too quickly.Solution: control the cooling rate, slow exhaust steam.The above is the calcium silicate board equipment in the production of prone to stick, blank, cracks and other phenomena of the reasons and solutions, if you encountered similar problems in production, you can have some reference.
- Q: Calcium silicate board for house ceiling, 6mm or 8mm?
- The calcium silicate board will not have the above shortcomings, the thickness of 15mm if it is the calcium silicate board 4mm ceiling 600*600 thickness can reach the effect of the biggest advantages of mineral wool board, calcium silicate board also is not a burning fire, moisture absorption is very good, green building materials.
- Q: The ceiling of calcium silicate board and mineral wool board which is good
- Calcium silicate board with fire prevention, moistureproof, sound insulation, thermal insulation, indoor air in wet conditions can attract water molecules in air, air drying, and the release of water molecules, can adjust the indoor humidity, dry, increase comfort.Natural gypsum products and special fireproof material, the flame can produce endothermic reaction, at the same time, the release of water molecules to prevent the fire from spreading, and does not produce any toxic decomposition, corrosive and choking gas, will not produce any smoke or combustibles.Mineral wool board is mineral fiber cotton as raw material, the biggest characteristic is to have good sound absorption and heat insulation effect.
- Q: Calcium silicate board white ICI belongs to wood surface paint?
- No, it isn't。Calcium silicate board material properties should be comparable with cement products, usually referred to as cement board is actually calcium silicate board.
- Q: Cement is not silicate products
- Usually refers to silicate products with lime (calcium containing materials) and sand, fly ash, slag (siliceous materials), then add a small amount of gypsum, the steam steam curing or steam curing, building products quickly generate Tobey mullite, calcium silicate, hydrated calcium aluminate sulfate and hydrated calcium aluminate such as cementitious materials and production. Such as: autoclaved fly ash (sand), autoclaved aerated concrete, autoclaved fly ash brick, autoclaved sand lime bricks.
- Q: What are the main use of lime?
- A rigid inorganic cementitious material consisting mainly of calcium oxide. Lime is made from limestone, dolomite, chalk and shell with high content of calcium carbonate and calcined at 900~1100 DEG C. Lime is one of the earliest cementitious materials used in human life. Lime is widely used in civil engineering and can be used in medicine in our country.
- Q: What's the difference between white cement and ordinary cement?
- White portland cement as the raw meal with the proper components till the partial melting of the calcium silicate as the main ingredient, the iron content in clinker less addition of gypsum, white water ground made of rigid cementitious material. When grinding cement, allow limestone not to exceed 5% of the cement weight. White cement is mostly ornamental, and its manufacturing process is much better than ordinary cement. The gap is mainly used to hook white tiles, is generally not used in the wall, the reason is not high strength. It is available in the building materials market or decoration materials shop.
- Q: How to make building glue?
- The invention relates to an architectural adhesive, which is characterized in that the composition of the building glue comprises 28-50wt% sodium silicate water solution, 34-53wt% quartz sand and 8-35wt% magnesium silicate.Adhesive for a building, it is the following: the weight ratio of 4 to 6, PVA cellulose 6 - 12, 1 - 2, copolymer admixture from 0.01 to 0.05, according to the proportion of polyvinyl alcohol with hot water first fully dissolved, then adding cellulose, copolymer, admixture and stir evenly. The glue can be combined with Portland cement or construction gypsum to cement all kinds of light plates. This product is non-toxic and tasteless, harmless to the human body, is a wide range of uses, superior technical performance of environmentally friendly building adhesive.
Send your message to us
High Quality Asbestos Free Calcium Silicate Boards
- Ref Price:
-
- Loading Port:
- China Main Port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- -
OKorder Service Pledge
Quality Product, Order Online Tracking, Timely Delivery
OKorder Financial Service
Credit Rating, Credit Services, Credit Purchasing
Similar products
Hot products
Hot Searches
Related keywords
