High Quality 100% Asbestos Free Calcium Silicate Boards
- Ref Price:
-
- Loading Port:
- China Main Port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- -
OKorder Service Pledge
Quality Product, Order Online Tracking, Timely Delivery
OKorder Financial Service
Credit Rating, Credit Services, Credit Purchasing
You Might Also Like
Application:
Can be used in washrooms as the ceiling, partition and backer boards. Additionally, Due to the features of fire prevention, thermal insulation, mildew proof and moisture proof, Bestinboards are also applicable to places where high security is needed.
Product Features:
1.Fire-retardant
2.Thermal-insulated
3.Mildew proof
4.Moisture proof
5.Sound insulated
6.Low moisture and water absorption
7.100% asbestos free and other hazardous substances.
Specification:
| Size | Standard Size | Size:1220*2440*4/6/8/9/10/12/15mm |
| Appearance | Surface | Surface:Un-Sanded/Sanded/Polished; |
| Edge | Square/Recessed/ | |
| Physical Properties | Density | 1.2-1.3g/cm3 |
| Bending Strength | Cross > 16Mpa Parallel 60-70Mpa | |
| Moisture Movement | <0.20% | |
| Water Absorption | < 0.1% | |
| Water Contain | <6%(Under EMS condition) | |
| Thermal Conductivity | 0.12-0.15 w/(m •k) | |
| Non-combustibility | GB 8624-2006 Grade A1,CE EN 12467:2012 Grade A1 | |
| Water Impermeablility | Traces of moisture appeared on the under surface of the sheet,but no formation of drops of water on the underside of the sheet after 24 hours. | |
| Freeze-thaw | Not have cracking and layering after freeze-thaw cycles 25 times. | |
| Application | Interior Ceiling,Interior Patition, Bottom Liner | |
| Products Warranty | More than 20 years |
| Raw Material | Content |
| Cement | 44 % |
| Quartz | 44 % |
| Natural Fiber | 8 % |
| Suspension | 4 % |
| Composition of Finished Product | Content |
| Crystalloid of Calcium Silicate | 52% |
| Quartz | 30% |
| Calcium Carbonate | 10% |
| Cellulose | 8% |
- Q: Calcium silicate board ceiling, wall patchwork and vertical degree how to control?
- If the height of the ceiling can be used to determine the height of the tile, you can use the wood is 3cm thickness * wall length, with steel nails to fix the wood on the wall above the tile, according to the determined installation height on the wood with ink bucket Horizontal Line Installation Edge. I hope I can help you
- Q: Home wall with a good board or silicon calcium board
- At present, there are two kinds of calcium silicate board, one is the use of calcium silicate insulation board, there is a decoration with calcium silicate board. ? Thermal insulation with calcium silicate board, also known as microporous calcium silicate board, is a white, hard new insulation material, with a light weight, high strength, small thermal conductivity, high temperature, corrosion resistance, can cut, Features, are widely used in electric power, metallurgy, petrochemical, construction, shipbuilding, aerospace, submarines and other areas of equipment piping and wall roof insulation and fire insulation. Decorative calcium silicate board is also called fiber cement board, is a kind of energy saving, environmental protection, safety, multi-function and other properties of light plate. Calcium silicate board is a mixture of siliceous material and calcium material in a certain proportion to organic synthetic fiber, inorganic mineral fiber or cellulose fiber and other short fibers as a reinforcing material, by pulping, molding, autoclaving curing, drying , Sanding and other processes made of a new type of lightweight sheet, with light high strength, fire insulation, shrinkage deformation is small, good processing, easy to surface decoration and so on.
- Q: Jinfu calcium silicate board and Matsumoto easy hair board that kind of good?
- For the two kinds of roughly the same new building materials, the production process with the copy method and flow slurry method. The thickness of the plate is 6mm ~ 12mm, the apparent density of about 600kg / m3 ~ 1200kg / m3 large-size sheet, can be used as buildings inside and outside the wall panels, ceilings, etc., suitable for the production of slurry thickness of 19mm ~ 32mm, the apparent density of about 750kg / m3 ~ 900kg / m3 of the plate. The use of copy or flow slurry method to produce calcium silicate board or fiber reinforced calcium silicate board has a heat, fire these two major performance.
- Q: Calcium silicate board why wet weather will appear scarred
- Wall junctions improperly handled: not in accordance with the requirements of the relevant nodes set construction, but in the calcium silicate board and the wall at the junction of the direct use of caulking putty full scraping, and some also use copper tape paste to strengthen, leaving no shrink space , Leading to cracking at the site.
- Q: What is the use of calcium silicate board with calcium silicate board ceiling is good
- Calcium silicate board is a new generation of "green" building materials, in the excellent moisture, fire performance based on the unique environmental protection features. It is based on silicon powder and calcium powder as the main substrate, with natural wood fiber as a reinforcing material, mixed with other auxiliary materials, through the flow slurry molding, in the high temperature, high pressure conservation of a new building materials.
- Q: What are the advantages of calcium silicate board?
- Fire, high strength, light, environmentally sound, long weather service life. 650 degrees above the decomposition, 650 degrees above the crack (more than 1000 degrees will melt into ceramic), the thermal conductivity is low so that the flame temperature can not penetrate the plate so as a wall of reinforced concrete (more than 400 degrees of water decomposition of water vapor expansion cracking Loss of strength) have a good protective effect;
- Q: Hydrate calcium silicate gel under what circumstances
- It is a gel state at room temperature, which is a microcrystal with long distance and order. It has the morphology of fibrous, reticular, granular and so long, and is about 1μm wide and about 0.2μm. Compounds.
- Q: Calcium silicate board material production methods which
- Calcium silicate (microporous calcium silicate) materials, calcium silicate board production methods are static autoclave, dynamic hydrothermal synthesis and secondary reaction method. At present, most of the domestic production of static technology, raw materials and auxiliary materials will be a certain proportion of ingredients, adding the right amount of water, stirring conditions heated to a certain temperature for gelation, and then by molding, autoclaved curing, drying the existing calcium silicate board Insulation materials products. Static method used diatomite for siliceous materials, calcareous materials and more lime. The process is simple and low cost, but in the production requires large capacity autoclave, and the reaction is not complete, the main form of tourbillate to calcium carbonate board, the use of low temperature (<650 degrees Celsius), it is difficult to produce light, Light high strength products.
- Q: What is the difference between silicon calcium board and high crystal plate?
- High crystal plate is actually improved after the calcium calcium board, more vulnerable to some moisture, not damp those deformation of the problem of color is gone. And gypsum this thing, there is breathing, you see the fracture of the tie are gypsum, breathable ah!
- Q: Calcium silicate board is not keel, you can directly nail on the wall?
- No, the same dragon skeleton. If you do not have a direct steel wall keel, directly with a wooden keel on it
Send your message to us
High Quality 100% Asbestos Free Calcium Silicate Boards
- Ref Price:
-
- Loading Port:
- China Main Port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- -
OKorder Service Pledge
Quality Product, Order Online Tracking, Timely Delivery
OKorder Financial Service
Credit Rating, Credit Services, Credit Purchasing
Similar products
Hot products
Hot Searches
Related keywords
