Non-Asbestos Calcium Silicate Board High Quality
- Ref Price:
-
- Loading Port:
- China main port
- Payment Terms:
- TT or LC
- Min Order Qty:
- 450 pc
- Supply Capability:
- 4500 pc/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Description:
Calcium silicate board is an asbestos-free thermal insulation product that can withstand continuous operating temperature from 650C up to 1100C. It is light weight, low thermal conductivity, high strength, easy to install, reliable and durable. There are 3 grades available namely 650 &1000 & 1100 which are commonly used as furnace backup insulation in steel, petrochemical, ceramic, cement & glass industry or fire protection in building construction. It not only provides energy saving, also increases production efficiency and gives personnel protection in industrial safety aspect. And in the housing construction Calcium Silicate Board is also used as the ceiling, fireproof and heat insulation materials of wall and sound absorption materials of decoration.
Applications:
Reheating furnace -Annealing furnace-Transfer ladle -Rotary kiln-Glass tank Dip tubes and spouts Nozzles -Shuttle kiln -Tunnel kiln -Aluminum melting and holding furnace- Distribution boxes, Flow gates Hot pipe supports-Other high temperature ovens or heat processing equipments
Recommendable applications:
Commercial building: Commerce mansions, entertainment sites, shopping malls and hotels
Industrial building: Factories and warehouses
Residential building: New residential housing, renovation and decoration
Public place: Hospitals, theater and bus stations
Technical data:
Standard Type Calcium Silicate Products
Items | Unit | Standard Type | GB/T10699- | JISA9510-1995 NO.1-22 | |||
LA-17 | LA-20 | LA-23 | LA-25 | ||||
Bulk Density | kg/m3 | 170 | 200 | 230 | 250 | ≤220, | ≤220 |
Flexural Strength | MPa | ≥0.25 | ≥0.35 | ≥0.45 | ≥0.50 | ≥0.30 | ≥0.30 |
Thermal Cond | W/m.k | 0.058 | 0.062 | 0.067 | 0.069 | ≤0.065 | ≤0.062 |
Temp. Limit | °C | 1000 | 1000 | 1000 | 1000 | 1000 | 1000 |
Linear Shrinkage | % | ≤2 | ≤2 | ≤2 | ≤2 | ≤2 | ≤2 |
Products with max. service temp. of 650°C are also produced.
High Temp Type Calcium Silicate Products
Based on 1000°C Standard Type,the temp. limited of this type is improved to 1100°C. As our paten, High Temp. Type can be used for high temp position of industrial furnaces.. | |||
Items | Unit | LA-25 | |
Bulk Density | kg/m3 | 250±10% | |
Flexural Strength | MPa | ≥0.50 | |
Temp. Limit | °C | 1100 | |
Linear Shrinkage | % | ≤2(1050°C,3hrs) | |
Themal Cond | W/m·k | ≤0.069 | |
- Q: Calcium silicate board ceiling, wall patchwork and vertical degree how to control?
- If the tile is affixed to the top of the case, on the side of the wall from the ground 230-240cm high point, with a transparent water pipe fixed on the other side of the wall coincide point and then line, to determine the hole after drilling with diamond drill bit The
- Q: What is the calcium silicate board used in the bathroom ceiling
- Integrated ceiling (aluminum-magnesium alloy material excellent moisture, long life, easy to wash and repair, expensive)
- Q: Calcium silicate board and magnesium silicate board which is better
- Calcium silicate board is made of paper fiber, high purity silicon, calcium raw materials, high temperature curing made of decorative materials, with fire, moisture, insulation, insulation, noise, deformation, etc., durable for up to 30 years The
- Q: Home improvement ceiling with a special board, scraping the cover is a good place is rural?
- Yes. Etter board is not calcium silicate board. The name of the Aite plate is a fiber-reinforced silicate plate. The board is imported from the plant fiber, not the ordinary calcium silicate board. Often the national standard is low. Etter board thickness has a lot of 6-12mm range. But for the ceiling is also due to project vary. Some room ceiling related to fire protection requirements, then they usually choose low-density series 8mm or 10mm; some just a simple office ceiling, then use the density of 6mm can be completely.
- Q: Is the calcium silicate board attached directly to the wall?
- (Long time will fall off) calcium silicate board and cement board is two kinds of boards, cement board is made of mixed materials, (house demolition of waste) calcium silicate board size is generally 1220 mm * 2440 mm calcium silicate Plate is not suitable for wall partition, because of its high hardness, easy to break. If you do the wall, it is recommended to use gypsum board. Home generally do not use carpentry production wall. Calcium silicate board for large ceilings, and prone to moisture. Ask: I was doing supermarket decoration, just started. The The The The The Supermarket on the ground floor, processing the wall side of the party does not allow brick walls (including hollow brick), because the wall under the beam, fear of bearing a problem. Several of these processing must be linked to the brick, because to moisture and moisture.
- Q: Indoor compartment with calcium silicate board or gypsum board is good?
- In fact, home improvement, or calcium silicate board is good, although the price high. However, the characteristics of calcium silicate board determines the calcium silicate board refractory waterproof, long service life
- Q: Calcium silicate board water absorption on the performance of the plate have any effect
- Calcium silicate board If the strength of the plate after the impact of a certain degree of impact, low density of the plate is relatively higher than the medium density, it is recommended that wet areas such as the use of density in the basement of the plate, while the toilet ceiling, although relatively humid
- Q: What is the difference between gypsum board and silicon calcium board?
- Silicon calcium board, also known as gypsum composite board, the main raw material is natural gypsum powder (CaSO4), white cement (calcium silicate), glue, glass fiber. Strength is much higher than the gypsum board; completely changed the gypsum board due to moisture and deformation of the fatal weakness, several times to extend the service life of the material.
- Q: What is the specific difference between the silicate board and the calcium silicate board?
- Due to the repetition of the noun, it was fake, of course, some people come out to clarify: "Calcium silicate board and" calcium calcium gypsum board "has nothing to do? Isolated. Calcium silicate board is the international general high-grade ceiling wall materials, Japan, the United States, Western Europe, Southeast Asia and other regions are commonly used in the construction of sheet metal in China, to JC / T564-2000 provides its name for the calcium silicate board. Calcium silicate board was introduced to China production, although less than 15 years, Excellent performance is widely recognized by the market. "Silicon calcium gypsum board" and claiming to be "silicon calcium board", although the title of "silicon calcium", but in fact is a certain improvement of the gypsum board or even purely ordinary gypsum board, trying to confuse the calcium silicate board. So far, there is no national or building materials industry standards for this product "named".
- Q: Will the calcium silicate board shrink when it is finished or finished?
- Calcium silicate board water absorption rate of about 20%, when the temperature difference is large, prone to deformation that occurs drum phenomenon.
Send your message to us
Non-Asbestos Calcium Silicate Board High Quality
- Ref Price:
-
- Loading Port:
- China main port
- Payment Terms:
- TT or LC
- Min Order Qty:
- 450 pc
- Supply Capability:
- 4500 pc/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
