Full Polished Glazed Porcelain Tile CMAXGB001
- Ref Price:
-
$6.15 - 6.25
/ m²
- Loading Port:
- Guangzhou
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1209.6
- Supply Capability:
- 100000 m²/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Product Brief Introduction
Full Polished Glazed Porcelain Tile CMAXGB001 is a very popular color in the present market. Just like other models, it could be used for interior floor for apartment, villa, super market as well as other public areas, due to its stone like surface, being high glossy and clean, homogeneous color shade as well as the reasonable price compared with natural stones.
Product Features
Full Polished Porcelain Tile, high glossy
Grade AAA available only
Strict quality control system on color shade, deformation, anti-pollution, surface glossy degree as well as packing
Much more competitive price
Standard export packing: Pater Carton+ Wooden Pallet
Fast production arrangement
OEM service could be offered based on the actual requirement
Comprehensive marketing support on samples, catalogues as well as carton designing
Professional sales team available for the whole order operation process
Product Specification
Tile Type: Full Polished Glazed Porcelain Tile
Quality standard: GB/T4100-2006, ISO13006, ISO9001
Water Absorption Rate: 《0.5%
Breaking Strength: 》 1800 N
Rupture Modulus: 》40 MPa
Length and Width Tolerance: ±0.1%
Surface Smoothness: ±0.15%
Edge Straightness: ±0.15%
Wearing Strength: 《1600 mm3
Glossiness: 》 90 Degree
Resistance to Chemical: Class UA
Resistance to Staining: Class 3.
Packing Information (For 27.5 Tons heavy 20’Fcl)
For 600x600mm, 4pcs/Ctn, , 35KgS/Ctn, 36 Ctns/Pallet, 780 Ctns/20’Fcl, 1123.2 m2/20’Fcl
For 800x800mm, 3pcs/Ctn, 56Kgs/Ctn, 28 Ctns/Pallet, 500 Ctns/20’Fcl, 960 m2/20’Fcl
Production Line & Package
FAQ
1. For the delivery term, could you go with CFR our port?
—— Yes, of course. We have very good relationship with those big shipping company, such as COSCO, MSC, HPL etc. We have a very professional logistic team to arrange the shipping issue well.
2. Could you company supply polished porcelain tile?
—— Yes. We could supply various kinds of polished porcelain tile, with size 60*60, 80*80, 100*100 and 60*120.
3. Could you put some samples in the container of our orders?
—— Yes. We’d like to offer free samples in the containers to our clients, with a certain quantity of different models.
- Q:I have a black and white tile floor, and most everything that I have tried has left it very slick even after it is dried. Does anyone know of any homemade product to clean it? I am also willing to try comercial products also. I am tired of my family slipping.
- Sounds like it probably has a wax finish on it? If so you can go to Lowes or Home Depot and get floor stripper. OR you can try to put comet in your mop water. I would think maybe something like vinegar and water would clean it and disinfect, but take away any slippery residue.
- Q:I just finished grouting my tile yesterday I want to remove the haze with vinager should I let the grout cure for three days,then seal it and then scrub the whole floor including going over the grout lines (which would be then sealed) scrubbing with a sponge and avoiding the non cured grout is working but is taking far too long
- Know what works best? Don't use any moisture at all to remove haze--You'll have to do it 2 or 3 times to totally remove the haze. Let the haze dry on the tile, then polish it off with a dry soft terry cloth--It may create a little dust in the air, but it works really well. Also, wait about a month or so before sealing your grout lines.
- Q:The tile of my garage is 10 years old. The house was abandoned and I bought it. The tile that was used was a textured ceramic tile. I‘ve tried brushing it and washing it with different products but it goes back to a dusty look. Any ideas on how to bring it back to life other than paying to get it polished by a professional. Thank you in advanced.
- If you don't want to pay for the labor to have it cleaned, you will be the one to do it yourself. Elbo Grease. Get some Tile Acid Cleaner from the Home dpot/Lowes, and a couple of hand held scrub brushes, some plastic bristles, some metal bristles, (to see which works best). Get a spray bottle, poor the acid into it. do not delut with water. Not until after it has sat on it for 5 min and you have scrubbed and scrubbed. Then spray with water (lightly Misting) and wipe up with disposable towels. Dont forget the rubber gloves. After the entire floor is finished or until you are satisfied (or if you want to do in Stages) wait until entirely dry and get some Tile Sealer and begin to apply. Pay attention to the grout lines first then mop all over the tile. The cost for materials will be about $50--$70 But the labor is where the real money is. Have Fun I do not envy you.
- Q:So I have the substrate ready, the room is a L shape 253 x 148. Where do I start the tile, I am assuming the center of each on a chalk line. Is this correct?Bond
- the most important thing is to have the lines parallel to the walls and to make sure that you do not have any small pieces of tile near any walls or cabinets. If you don't like math you should lay the tiles out on the floor and see how the lay-out works. Every minute that you spend on a good layout will pay off in the end and make finishing easier.
- Q:The 12 by 12 tiles were laid 7 years ago and nothing is different, but last October some of them over by the exterior wall of the house started tenting. There had been no more or less rain. What would make them do this?Here‘s some more info:-They started cracking in the part of the house that was added on.-The new foundation may not have been sealed.-My brother put them down and he tends to do a crappy job at best. He thinks they were cheap tiles.-I found traces of termites when I started pulling them up (seems unrelated since they‘re ceramic tiles, but one never knows...)Any advice on replacing them would be greatly appreciated!
- Ceramic tiles are rated at 3 4 5 and 5 being the best as far as breakage goes and if you have some that are rated at 3 or maybe 4 they may break through the years this is one reason. Another reason is that the floor may have settled through the years and this has caused them to crack especially if you say this part was added on. A good floor and sub floor if it was laid right and then they did use a cement board when they laid tiles I doubt moisture is the problem unless the floor became totally saturated. You can take the cracked tiles up carefully and scrape all the thin set off of the cement board or underlayment what ever you have. Make sure it is dry and level if you have any part of the floor that is not level you will have a few cracked tiles for sure. Apply new thin set and place new tiles. Re grout and you are done. You say these started cracking in the part of the house that was added on it may be that part of the floor has settled down more and you may to make sure that this is all level before you can place new tiles. Good Luck
- Q:What is the tile diagonal
- Square tiles in the order of the first and third corners or the second and fourth corners connected to the length of the line, is the diagonal of the tiles. Not the four sides and so on
- Q:I'm decorating my bathroom with a soothing and relaxing water theme (sand and water colours - beige, white, earthy brown, pale blue, and pale green). I need a backsplash behind my sink and tiles in the shower area. Any ideas that would work with this theme?
- about okorder / municationsmgr...
- Q:I am am re-tiling the kitchen counter. Please help. Thanks.
- this site shows you exactly what, and how to do it, hope this helps
- Q:hi friends.. we r constructing a new house.. many people say us lay tiles for floorins and many say to use marbles or granite?...so confused!!!!.. wat to do?quite big house situated quite beneath the hills.
- tiles much cheaper than marble/granite
- Q:I have this ceramic tile in my bathroom (on the wall, not the floor). There is absolutely nothing wrong with it, except it is an incredibly ugly color. I would like to paint it, rather than rip it all down just to put up more tile. Any suggestions?
- You can paint it, but you're going to have a lot of trouble finding a paint that will stick to it if it's glazed. It won't look much better painted.
1. Manufacturer Overview |
|
|---|---|
| Location | |
| Year Established | |
| Annual Output Value | |
| Main Markets | |
| Company Certifications | |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | |
| Export Percentage | |
| No.of Employees in Trade Department | |
| Language Spoken: | |
| b)Factory Information | |
| Factory Size: | |
| No. of Production Lines | |
| Contract Manufacturing | |
| Product Price Range | |
Send your message to us
Full Polished Glazed Porcelain Tile CMAXGB001
- Ref Price:
-
$6.15 - 6.25
/ m²
- Loading Port:
- Guangzhou
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1209.6
- Supply Capability:
- 100000 m²/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
