Fiberglass FRP Molding Floor Gratings Anti-Slip Lightweight
- Ref Price:
-
$3.00 - 10.00
/ m²
- Loading Port:
- China Main Port
- Payment Terms:
- TT or LC
- Min Order Qty:
- 10 m²
- Supply Capability:
- -
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Introduction
FRP Molded Grating is a structural panel which uses high-strength E-Glass roving as reinforcing material, thermosetting resin as matrix and then casted and formed in a special metal mold. It provides properties of light weight, high strength, corrosion resistance, fire resistance and anti-skid. FRP Molded Grating is widely used in oil industry, power engineering, water & waste water treatment, ocean survey as working floor, stair tread, trench cover, etc. and is an ideal loading frame for corrosion circumstances.
Feature
Corrosion Resistance
Fire Resistance
Light Weight & High Strength
Safety & Anti-slip
Electrical Insulating
Aging Resistance
Specification
Advantage
coated with prevent aging layer
excellent insulating performance
no maintenance
high strength
long service life
easy installation
Application
Power plants, substation equipment enclosures, antimagnetic, anti-static,to prevent small animals into the equipment failure, as there is electricity facilities and without power interval intervals.
In high voltage electrical equipment for power line work, in order to prevent workers go wrong location, charged interval or near electrically charged equipment to dangerous distance.
Pool railings in sewage treatment industry
Corrosive chemical industry equipment around the fence
All kinds of building maintenance section
FAQ
1. How about the documents after shipment?
After shipment, we ll send all original documents to you by DHL, including Packing List.Commercial Invoice, B/L, and other certificates as required by clients.
2. How long is the delivery time?
Usually it takes 10-25days after receipt of the deposits or L/C, and it also depends on the quantity of your order.
3. How's the payment?
Telegraphic Transfer(T/T) or Letter of Credit(L/C)
4. Do You Arrange Shipment?
Yes, dear esteemed customers, for FOB or CIF price, we will arrange shipment for you. For EXW price, clients need to arrange shipment by themselves or their agents.
5. How is the package?
Usually, we arrange the standard out-package for exporting.
PROCESS
FACTORY
- Q:If you know any sources on the internet that can help me will be great too, thx!
- hmm no that was humans but it could have been plane by god or a complete accident.
- Q:so i think this is stupid question but i was lookin online and in a store is the only difference that the the low rider stands for being shorter??cause at first i thought that is was worn lower on your stomach??so what‘s the right one??
- Low rider means they sit lower on your hips. Which for spandex doesn't exactly matter, since you can roll them. I prefer my spandex to sit low on my hips so I like the low riders. I have friends that wear theirs higher so they get more of the normal fit. The inseam is what determines how long they are past your crotch (for lack of a better word).
- Q:I‘m a soon to be new mother and I‘m considering using cloth diapers. I was looking for mom‘s who have experience using them. any words of wisdom? Prefered brands, ect? I‘m just generally clueless beyond internet reading. so any real life experience you have to share would be most welcome. Thanks in advance!
- I cloth diaper. I use diaper service quality prefolds that I buy used on OKorder, I bleach them with non-chlorine bleach. I used Dappis covers at first, but they wick moisture into the cover and clothes. I used Chummies, but they're awful bulky. My personal favorites are ProRap covers. They're workhorse wraps, very durable and I've NEVER had a blowout (I can't say the same for disposables!!). As for laundering them, I was cloth diapering in a house WITHOUT a washer and dryer, so I was actually doing my diapers at a laundromat. (I think I deserve extra Amazing Crazy Mama Points for that) I would just rinse the pees out in the tub, and put them in a 5 gal. bucket with some non-chlorine bleach to soak. The poops, I would rinse out in the tub as well, since breastmilk poops are pretty much liquid anyways. I'd rub the diaper over itself to get the poops out really well, don't worry about getting dirty, if you are, have a special pair of gloves. I never bothered with this, I'd just wash my hands with soap when I was done. But anyways, I'd put the poops diapers in a separate 5 gal bucket with a little stronger solution of non-chlorinated bleach. The covers, I'd reuse them, wiping them out with a wipe between changes, or letting them air out in the sun between changes. After two or three uses, or one poopy diaper, I'd throw them in the baby-clothes hamper to be carted off to the laundromat. Launder diapers seperately from wraps on HOT with baby-safe detergent and a no-chlorine bleach, vinegar, lemon juice, baking soda, whatever floats your boat. Then dry on HOT. Wraps don't do well on high heats, so wash them with the baby's clothes, also with no-chlorine bleach and detergent, just dry them on medium or low heat. I always get my diapers on OKorder, I never buy them new. They are SOO expensive new, I simply can't afford them. But even brand-new, they are STILL cheaper than disposables!! YOU CAN DO IT, your baby's butt and our environment applaud you!
- Q:i‘m doing an artpiece in the style of sigmar polke. I read that he uses a lot of cloth and paints on top of it with things but what kinds of materials did he use to paint? acrylic? spray paint? ink? and what kind of fabric is best to paint on so that the color stays on? cotton, polyester, synthetic fiber, etc?
- If you use acrylic paints, you really don't have to worry what type of fabric you use. Acrylic covers everything! If you have your choice though, choose cotton fabrics. It will soak up the paint without hesitation. Good luck! And show your final project on ETSYLove to see them. Goodluck!
- Q:i am looking for a list of main cloth materials, e.g cotton. all the main ones, used mainly in all our day to day stuuuf. THANKS!
- ok i'm gonna be brief, a lamp will not be needed because leopard geckos are nocturnal, for their heat source you should use an under tank heater, their warm side should be 85-90 degrees and the cool side should get no lower than 75, don't use sand because it causes impaction and digestion problems ultimately killing your pet, provide plenty of hides for them so they can feel safe, you wont see any activity during the day but check them out at night they will be a lot more active, i feed mine crickets and meal worms i dust each of them every other feeding, sometimes they wont eat everyday don't be alarmed because they will only eat whenever they are hungry, provide a water, food, and calcium dish in their tank, and thats basically it on basic care, if you have any more questions feel free to email and ask hope i helped
- Q:Okay I decided to beat my cushions to get the dust out and noticed that some nasty dried up gum was on one of the corners! I‘m assuming it was one of my friends but whatever. What can I use to get the gum off? I have used PB for my hair when I got gum stuck but for my maroon sofa cushion? Idk. HELP!
- i totally understand what just happened to you. i mean you dont seem like the meanest person on earth. you were just being assertive. what you're doing doesn't really match with the definition of the word solicitation but idk. The ladies also should have had a more peaceful approach. yes this world is indeed nasty.
- Q:Why is there a big emphasis on things like homosexuality, but not on gambling or cursing or eating shellfish, which are all refferred to as sinful in the eyes of god?
- I am not trying to be difficult, but I am catholic and currently go to a nondenominational christian church, and I have never heard in a mass or church service an emphasis on homosexuality. Honestly most christians that I know are not against gay people. But anyway, I think that people cherry-pick their beliefs because some things are obviously wrong like lying and stealing and others like gambling or eating shellfish (lol) don't hurt anyone so why not? Thats just my opinion.
- Q:it‘s around 45 degrees f at my house, I‘m molding a fiberglass paddle.I‘m using this stinky polyester resin to wet-out. On the back it says if it‘s 70-80 degrees use 12 drops of hardener per fl oz, but it‘s only 45 degrees and I still used 12 drops, will it still work just work slower?
- The mass air flow sensor burns red hot when engine is running. Drowning the engine causes the wire in the MAF to break causing a problem with the on-board computer. I would say replace the MAF. Good luck.
- Q:What is the difference between a glass fiber and an alkali free base?
- Because each production companies for the secrecy of their products, as well as confidential infiltration agents, only the so-called wax wax free argument, for the end user of glass fiber, as long as the same dosage of sizing agent for inspection, and after supporting the production of it
- Q:What is the difference between building ventilation duct material, FRP pipe material and fiber reinforced magnesia pipe type MFR7 composite duct material?
- Fiberglass reinforced plastic, usually fiberglass reinforced unsaturated polyester, epoxy resin and phenolic resin matrix. Reinforced plastics made from glass fiber or its products are referred to as glass fiber reinforced plastics or glass fiber reinforced plastics. Because of the different kinds of resins used, they are called polyester glass fiber reinforced plastics, epoxy glass fiber reinforced plastics and phenolic resin glass fiber reinforced plastics. It is light and hard, non conductive, stable in performance, high in mechanical strength, low in recycling and corrosion resistant. It can be used instead of steel to make machine parts, automobiles, ship shells, etc..Fiber reinforced magnesium duct MFR7 composite material is made of glass fiber and magnesium sulfate cement compounded material, reinforced material is glass fiber mesh cloth base glass magnesium cement (say white cement), because magnesium cement easy to absorb moisture, so it is easy to warp.
1. Manufacturer Overview |
|
|---|---|
| Location | |
| Year Established | |
| Annual Output Value | |
| Main Markets | |
| Company Certifications | |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | |
| Export Percentage | |
| No.of Employees in Trade Department | |
| Language Spoken: | |
| b)Factory Information | |
| Factory Size: | |
| No. of Production Lines | |
| Contract Manufacturing | |
| Product Price Range | |
Send your message to us
Fiberglass FRP Molding Floor Gratings Anti-Slip Lightweight
- Ref Price:
-
$3.00 - 10.00
/ m²
- Loading Port:
- China Main Port
- Payment Terms:
- TT or LC
- Min Order Qty:
- 10 m²
- Supply Capability:
- -
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
