Fire Wafer Butterfly Valve DN25-DN1200
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 unit
- Supply Capability:
- 10000 unit/month
OKorder Service Pledge
Quality Product, Order Online Tracking, Timely Delivery
OKorder Financial Service
Credit Rating, Credit Services, Credit Purchasing
You Might Also Like
1.Technical Date:
Size: DN25-DN1200
Nominal Pressure: PN10/PN16
Operation Temperature: -10°C~150°C
Suitable Medium: Water.
2. Standard
Design Standard: GB/T 12238-2008
Structural Length: GB/T 12221-2005
Top Flange dimensions: ISO5211
Face to face dimensions: GB9112,DIN2501,BS4504,ISO2084,ANSI125
Type of connection: Wafer Type \Flange Type\Clamp
3. Feature:
This valve is mainly composed of body, butterfly plate, valve shaft, seat and transmission devices. Simple and compact structure, small portable, convenient for transport, install and dismantle. 90 degrees of opening and closing, switch quickly, operating is small, light energy; Sealing performance is good, service life is long, can achieve zero leakages. Flow curve tending to straight line, excellent regulation performance.
4. Sealability:
The valve for rubber seal, closing butterfly plate and seat sealing performance is good, two-way sealed good performance and the torque is small. the friction is very small between butterfly plate and the seat seal. The valve shaft drive the butterfly plate, butterfly plate do 90 degrees rotation. Butterfly plate flexible for opening and closing, no card acerbity, beating phenomenon, small torque.
- Q: Why anti condensation of aluminum alloy anti condensation butterfly valve?
- High performance materials have a lot of outstanding advantages: such as low water absorption, corrosion resistance, insulation, cold insulation performance, etc., is 4 times the ordinary material butterfly valve.Anti condensation butterfly valve body adopts ultra light aluminum alloy valve body, its weight is only 1/3 of the traditional butterfly valve, the torque is small, the use and installation is convenient, and the corrosion is avoided.
- Q: Seat has said to the previous owner that the car needs a new air mass meter and dump valve.I am putting a new air mass meter on it.Does it have a dump valve.I know very little on this subject.
- every turbo will have a dump valve(waste gate) to regulate the boost to the engine Dump valves are fitted to the engines of turbo charged cars and sit between the turbo outlet and the throttle body. When transitioning from a boosted state to a closed throttle state (as in between shifts), due to inertia, the turbo continues to pressurize air, but the closed throttle prevents the compressed air from entering the engine. In this case the pressure exceeds the preset spring pressure in the dump valve and the excess pressure is bled off to atmosphere. Even with a dump valve the compressed air acts as a brake on the turbo (slowing it down), because the pressure on the backside of the turbo is at a higher pressure than on the front side (and the air actually wants to flow through the turbo backwards). A blowoff valve is a more elegant solution to this problem by allowing the turbo to freewheel when the throttle is closed (equalizing the pressure on both sides of the turbo). Unlike a dump valve a blowoff valve can be used at multiple boost settings without reconfiguration. Blowoff valves are sometimes incorrectly called dump valves because they serve a similar function, but they are very different solutions to the same problem.
- Q: How do hydraulic butterfly valves work?
- The valve hydraulic device is mounted on the valve drive shaft. The driving shaft of the valve is fixed with a transmission spline, and the crank (with an outer spline) is sleeved on the driving shaft. When the hydraulic system works normally, through the gear sleeve, the transmission spline is connected with the crank. Thus, the hydraulic cylinder drives the crank, and the spline on the crank passes the torque to the transmission spline by means of a gear sleeve. Because the driving spline is fixed on the driving shaft, the driving shaft rotates and drives the valve plate to start and close. Sorry, the picture doesn't come up
- Q: What is the working principle of the electric butterfly valve, and what's the difference between the butterfly valve and the butterfly valve?
- General large bore turbine.What is the difference between worm gear pair butterfly valve and center line worm gear butterfly valve?The structure is the same, but the model is different, the central line refers to the butterfly valve, an eccentric structure (371), the clip butterfly valve can do 371, you can do 373, etc.. In more detail, the clamp can be a midline type, 1 single eccentric, 2 double eccentric, 3 is 371372373 midline, then it can be flange connection, it can also be a pair of clamp connection
- Q: Three eccentric hard sealing butterfly valve, why not fit in the end of the pipe?
- Louzhu asked extremely, since it is hard seal, it is bound to guarantee long-term work after zero leakage, or should be configured double eccentric soft sealing valve is more reasonable.
- Q: Fire signal butterfly valve what role?
- Signal butterfly valve should be human action monitoring alarm, once closed, that is, to the system alarmYou ask the two time, I answer two times, you give two points
- Q: How can the flange butterfly valve be installed on the pipe?
- Outlet pipe configuration.If in the pipeline, the valve in order to do not bear the direction of the force and bending moment, it is best to set the valve at the exit side of the expansion joint. Valve opening and closing valve water pressure should not be borne by the foot, but through the valve flange, by the pipeline to bear as well.Butterfly valve structure is generally shorter length, and its butterfly plate will be extended to adjacent pipes or other parts, so be careful not to collide with other parts and interference. And to prevent the error matching pipe diameter greater than C and collide with the butterfly plate.Butterfly valve as a regulator, just adjust the flow and pressure. The valve is regulated by loss of pressure.
- Q: DN80 flange butterfly valve, DN80 flange butterfly valve DN80, flange butterfly valve DN80 what is the difference?
- No, what's the difference?. It's not all the same.Flange connectionDN80 caliber butterfly valve. What's the difference?. Model and pressure. Materials are not ~!
- Q: Butterfly valve structure and working principle
- The clip type butterfly valve is connected with the two pipe flange with a stud bolt. The flange type butterfly valve is provided with a flange on the valve, and bolts are used to connect the flanges at the ends of the valve to the pipe flange.
- Q: What are the uses and classifications of manually operated clip butterfly valves?
- Classification: butterfly valves are commonly used on the clip butterfly valve and flange butterfly valve two. The clip type butterfly valve is connected with the two pipe flange with a stud bolt. The flange type butterfly valve is provided with a flange on the valve, and bolts are used to connect the flanges at the ends of the valve to the pipe flange.
Send your message to us
Fire Wafer Butterfly Valve DN25-DN1200
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 unit
- Supply Capability:
- 10000 unit/month
OKorder Service Pledge
Quality Product, Order Online Tracking, Timely Delivery
OKorder Financial Service
Credit Rating, Credit Services, Credit Purchasing
Similar products
Hot products
Hot Searches
