Fanfold Roofing Insulation Woven Film MPC
- Ref Price:
-
- Loading Port:
- China Main Port
- Payment Terms:
- TT or L/C
- Min Order Qty:
- 10000M2 m²
- Supply Capability:
- 20000M2 Per Day m²/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
1. Specification of Woven Film
Aluminum foil: Metallizedpolyester: 12u / Polyethylene / Polyethylene Woven Fabric/Aluminum foil: 7u
TYPICAL PHYSICAL PROPERTIES:
|
PROPERTIES |
UNIT |
VALUE |
TEST METHOD | ||||
|
Basic weight |
gsm |
140 |
ASTM D646 | ||||
|
Tensile strength: M. D. X. D. |
N/25mm |
450 450 |
ASTM C1136 | ||||
|
Burst strength |
N |
150 |
ASTM D774 | ||||
|
Reflectivity of foil surface |
% |
95 |
---------- | ||||
|
Temp. Resistance |
-29°C +66°C |
No change keep soft |
ASTM C1263 | ||||
|
Water vapor permeance |
ng/N.s |
1.6 |
ASTM E-96 | ||||
|
Water Soak Test |
24hrs |
No delamination |
---------- |
Width: 1.2m, 1.25m, 1.3m
Length: 60m, 100m, 120m
Core I.D.: 3"(76mm ±1)
Based on order, special sizes are also available.
Remarks:
(1).The data above are typical results and subject to change without notice.
(2).Tolerance: Weight and Thickness: ±10%; Width: ±3mm; Length: Cut Roll & Log Roll ±0.3m, Jumbo Roll ±0.5%.
(3).The products should be stored at room temperature and kept from wet and heat source.
(4).It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied must be clean, dry, and free of grease and oil.
(5).The user should take test and do trial-application on the above products before coming into application so as to witness and ensure suitability for user’s special purpose and technique.
2. Application of Woven Film
Foil facing is mainly used for duct wrap in HVAC sustem and other fields, such as vapor barrier etc., and suitable for off-line lamination of glass wool or rock wool. By special processing, the facing will have excellent flame retardant property.
3. Packaging & Delivery of Woven Film
Depends on the clients' requirements and the production conditions.
- Q: the roof of my mouth hurts bad.i worked all day with sawdust and insulation yesterday.is this the problem.?
- it is what might have irritated your mouth. use a mask in the future. for now, increase your fluid intake and try Benedryl for a few days.
- Q: I have an apartment building that has mold in it. I'm trying to do everything I can to increase the airflow. Sure, the tenants might have to spend a mint on heat, but if it improved the air quality, maybe it would be a good idea.
- You can remove it, but why not replace it with rolled insulation? I'm sure you're local State Board of Health would disaprove of not having your tenant's homes properly insulated. You could get into a lot of legal trouble if you do not keep you apartment building properly maintained.
- Q: 1) What thickness of rigid insulation is used on flat roofs?
- It depends on what R factor is called for , usually 1 & 1/2 inch on roof 2 &1/2 on walls ( usually statdard)
- Q: I would like to find foam type tiles for my roof of decking, insulation?
- www.okorder I checked the website I posted by searching 'foam roofing' on google. This link is what I found but there are others... Google it to find your best deal. I think I will spray this stuff under my pier and beam home just to insulate. Thanks for the tip! I can buy this product, apply it myself and cut the cost down to 1/3 or more.
- Q: ... building code max. (R-50)???
- Anytime snow melts from a roof due to lost heat from the interior, or sun shining on the roof, but air is below freezing, icecycles will form. The real danger here is ice cycles that can fall when thawing and kill in extreme cases, AND ice dams can form forcing ice back up under shingles damaging roof. That is why it is often a good idea to install heat tape under the edge of roofs in areas that are prone to heavy freezes and snow.
- Q: How do I adequately insulate my attic roof to make the space a bit more habitable in the winter? The floors to the living area below are already insulated and we have a gable mounted fan which is great in the summer. I am thinking of adding insulation to the roof with baffles underneath for air circulation through the soffit vents. Am I anywhere near an idea that may work?
- What you could do is line inbetween the roof trusses with fibre wool and then fix heavy cardboard sheets over them to keep them in place. Alternatively you could engage the services of a specialist company who will come and strip off your tiles/slates whatever and spray an insulating foam on the inside thus sealing everything in place.
- Q: attic insulation
- Blow in insulation is so easy and cost effective, do it yourself. Machines can be rented at Lowes, HD, etc where you buy the material.
- Q: What can i do to add more insulation in a addition in my house?The Roof is flat on this addition (no attic room for insulation there).Looks like it's only 4 or 5 inches thick, starts from the inside with 1/2 inch drywall and the rest is plywood, and then that black sheeting on the outside.IS THERE ANYTHING MORE THAT CAN BE DONE TO ADD MORE INSULATION ON THE OUTSIDE?, (i can't do anything on the inside since the ceiling is already low) SINCE IN THIS ROOM IS VERY HOT, even touching the celing feels warm, PLEASE HELP!
- You could build a pitched roof on top of the flat roof.
- Q: I am thinking about getting cavity wall and roof insulation at the moment.But since summer is approaching, I fear that getting the insulation will mean that the house will be very hot at night. (During day time the house will accumulate heat from the sun, and the heat cannot escape).I also fear that the ventilation will be bad and the air in the house will not be as fresh.Any advice please?
- Insulation helps both in heating in the winter and with cooling in the summer!
- Q: I would like to know which direction the one side with foil faces. The roof or the interior of the room?This is an attic room. Roof being "raw" i mean that it looks like cedar tongue in groove boards...then shingles on top of them. Which way do i face the foil side of the sheet..?thanx
- The foil side should go to the outside. I believe it's a moisture barrier.
1. Manufacturer Overview
| Location | Hangzhou, China |
| Year Established | 2006 |
| Annual Output Value | Above US$ 18 Million |
| Main Markets | 10.00% Mid East 15.00% Northern Europe 10.00% North America 22.00% Eastern Asia 7.00% Africa 7.00% Eastern Europe 18.00% Southeast Asia 4.00% Oceania 4.00% Western Europe 3.00% Southern Europe |
| Company Certifications | 无 |
2. Manufacturer Certificates
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period |
3. Manufacturer Capability
| a) Trade Capacity | |
| Nearest Port | Shanghai |
| Export Percentage | 30% - 50% |
| No.of Employees in Trade Department | 20-35 People |
| Language Spoken: | English; Chinese |
| b) Factory Information | |
| Factory Size: | Above 6000.00 square meters |
| No. of Production Lines | Above 8 |
| Contract Manufacturing | OEM Service Offered; Design Service Offered |
| Product Price Range | Low; Average |
Send your message to us
Fanfold Roofing Insulation Woven Film MPC
- Ref Price:
-
- Loading Port:
- China Main Port
- Payment Terms:
- TT or L/C
- Min Order Qty:
- 10000M2 m²
- Supply Capability:
- 20000M2 Per Day m²/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
