Battle Creek Roofing Insulation Company Rockwool Blanket for Thermal Insulation
- Ref Price:
-
$5.00 - 10.00
/ m²
- Loading Port:
- Tianjin
- Payment Terms:
- TT or LC
- Min Order Qty:
- 10000000 m²
- Supply Capability:
- 10000000000 m²/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Rockwool Blanket Price For Thermal Insulation
1.Structure of Rockwool Blanket Price For Thermal Insulation：
Rock wool insulation refers to a type of insulation that is made from actual rocks and minerals. It also goes by the names of stone wool insulation, mineral wool insulation, or slag wool insulation. A wide range of products can be made from rock wool, due to its excellent ability to block sound and heat. This type of insulation is commonly used in building construction, industrial plants, and in automotive applications.
The Manufacturing Process
Melting / Forming into fibers /Continuous-filament process/Staple-fiber process/ Chopped fiber/ Rock wool / Protective coatings /Forming into shapes
2.Main Features of Rockwool Blanket Price For Thermal Insulation：
● FEATURES
Thermal Insulation
Fire Safety
Acoustic Control
No Corrosion
Environmental friendly
Moisture Resistance
Energy Conservation & Emissions Reduction
Different raw material: Our rock wool is mainly made by Basalt and other natural ores. The raw material for other so-called rock wool is mineral slag. Different raw material, different features.
Different corrosion resistance. Our rock wool have good corrosion resistance. non-corrosive for metal. But the mineral slag wool is different. In high humidity environment, CaS in mineral slag will have chemical reactions and produce corrosive when contact with metal.
Different working life. The working life for mineral slag is very short and Durability is very low because of higher CaO and MgO in slag. The efflorescence for mineral Slag is easy and also effect the working life. The
Different heat resisting. The heat resisting for rock wool(Basalt) is higher than mineral Slag wool. Our operating temperature can reach 800℃.But for Slag wool ,can not higher than 675℃.The features for our rock wool is totally superior to Slag wool.
3. Rockwool Blanket Price For Thermal Insulation Images
4. Rockwool Blanket Price For Thermal Insulation Specification
ROCK WOOL BLANKET & BOARD
Standard Size
Product Blanket Board
Density (kg/m3) 60-100 40-200
Size: L x W (mm) 1200X3000-6000 600X1200
Thickness (mm) 30-150 30-100
Remark:
Other sizes are available upon request.
Facing materials can be applied upon request.
Standard Size
Product Blanket Board
Density (kg/m3) 60-100 40-200
Size: L x W (mm) 1200X3000-6000 600X1200
Thickness (mm) 30-150 30-100
Remark:
Other sizes are available upon request.
Facing materials can be applied upon request.
Rock wool PIPE
Standard Size
DIA Thickness (mm)
inch mm 25 30 40 50 60 70 80 90 100 120 150
1/2’’ 22 ● ● ●
3/4’’ 27 ● ● ● ● ● ● ●
1’’ 34 ● ● ● ● ● ● ●
1-1/4’’ 43 ● ● ● ● ● ● ● ● ●
1-1/2’’ 48 ● ● ● ● ● ● ● ● ●
2’’ 60 ● ● ● ● ● ● ● ● ●
2-1/2’’ 76 ● ● ● ● ● ● ● ● ●
3’’ 89 ● ● ● ● ● ● ● ● ●
3-1/2’’ 108 ● ● ● ● ● ● ● ● ●
4’’ 114 ● ● ● ● ● ● ● ● ● ●
5’’ 140 ● ● ● ● ● ● ● ● ● ●
6’’ 169 ● ● ● ● ● ● ● ● ● ●
8’’ 219 ● ● ● ● ● ● ● ● ●
10’’ 273 ● ● ● ● ● ● ● ● ●
12’’ 325 ● ● ● ● ● ● ● ● ●
14’’ 356 ● ● ● ● ● ● ● ●
15’’ 381 ● ● ● ● ● ● ● ●
16’’ 406 ● ● ● ● ● ● ● ●
18’’ 456 ● ● ● ● ● ● ● ●
19’’ 483 ● ● ● ● ● ●
20’’ 508 ● ● ● ● ● ●
22’’ 558 ● ● ● ● ●
24’’ 610 ● ● ● ● ●
5.FAQ
We have organized several common questions for our clients，may help you sincerely：
① What’s the mainly material for rock wool？
Rock wool is called a mineral wool because it is made primarily from basalt, an igneous rock,
②What’s the mainly type for rock wool？
rock wool insulating products are available in loose-fill form and as batting. Batts, or blankets, are thick slabs of insulation that may have a kraft paper facing.
③How you control the quality?
During the production of fiberglass insulation, material is sampled at a number of locations in the process to maintain quality.
- Q: I have a low pitched roof so there isn't that much room up there hands and knees only.I have no eave ventilation but the ventilation is through the front and back of the house through triagle metal caps cut into the wood siding. I already have some R19 in the ceiling joists but was wondering would putting it in the rafters against the plywood holding the shingles also help insulate the living area of the house.
- Best way and easy cheap way is just roll out unpapered fiberglass over top of joist at right angles to existing insulation
- Q: I am really confused about this science stuff! Sustainability is terrible xP
- i'm designing a house it quite is a retangle on the 1st floor with an L shape on the 2d and installation into that L i choose to have a greenhouse related. My plan is to apply 2x10 or 2x12s for my floor joist that way i can insulate the ceiling of the room it is under that and the two partitions that are related to the greenhouse. no longer a lot to learn any warmth from it,yet to have plant life. If i choose to get any image voltaic benefit illl in simple terms open the door to the domicile
- Q: if you had snow and all the snow is off your roof and the house nex store has snow do we need insulation?
- You hit the nail on the head and is a direct indication that you need more insulation. As a matter of fact, many carpentry companies send the sales force out in the winter (When new home building is slower) to look for houses with no to little snow on their roofs compared to their neighbors. This is an indication that the roof is allowing to much heat to escape which then melts the snow on the roof. But take one other thing into account. Was the wind blowing? If the wind is blowing, it could blow snow off your roof and not your neighbor due to his location, obstructions(such as tree's, other buildings) or design of his roof. lastly, depending on the orientation of your home, more sunlight can hit your roof than your neighbors allowing more snow to melt. If your roof is darker compared to your neighbor, it can increase your snow melt compared to your neighbor. If the snow is recent and your neighbor has snow on the roof and you don't, chances are that you need insulation as $$$ is escaping out of your ceiling.
- Q: Hi, my building is hot in temperature in summers, so I am finding ways to tackle the problem by placing some heat insulating materials against the sunlight on the roof of my building. I have found several possible solutions, but none of them close to perfect. 1. grass layer: hard to maintain2. heat-insulating brick: might be too heavy to carry them to the roof3. heat-insulating coating: would it be damaged if we step on them? Are there things like heat-insulating carpets that would be convenient to instal?
- Closed cell spray foam applied to the inside of your roof sheathing will work just fine. It needs to be installed by a specialty contractor. Good Luck
- Q: weather stripping/ foam strip?
- Those foam strips they sell you to go under the ridge caps will eventually dry out, blow out, and be hanging all over the place. Caulking won't fill a 5/8's gap to keep the wind/rain out, and tar has no place whatsoever on a metal roof, you'll get it all over everything, and either one will look like ****. The best ridge cap has to be custom made and cut to fit. I use a 12" wide X 10' strip, bent in half to pitch, and then turn down 90 degrees on the edges, whatever the rib height is, usually 5/8". Hold the ridge cap in place on the ridge and mark where the ribs are, then notch out for the ribs so that the cap sits flush over the ribs and down on the flats, punch holes and screw down thru the tops of the ribs. It's a little time consuming but it makes for a good looking finished product that won't wear out.
- Q: The distance between knee wall and attic ceiling is about 6 foot. Could I push a perforated pipe between the rafters?
- That is an option. And there aren't many options.Not much is going to slide easily behind the insulation. I'm thinking --------------------. You are undoubtedly going to snag on roof nails coming through the decking. I don't know if they would hold up but the cardboard tubes wrapping paper comes on might work if you tape 2 together. and flatten and tape the end you will be pushing in first. cut slots with utility knife. I think your idea would work if you can afford the pipe. That's a tough one. When we convert attics we line those cavities with a styrofoam insulation chute end to end until we reach open ventilation-you probably know that by now. Give it a try.
- Q: We have recently moved into a house in Australia with a tin roof. There is a layer of 5cm batts on the rafters in the roof space, but the temp is 10-15 degrees C higher up there than in the house (with all the windows and doors open). I don't want to get air-conditioning, is there another way to insulate the roof and cool the house?
- put insulation above the ceiling (not on the rafters) and add vents on each side of the attic....
- Q: How do I adequately insulate my attic roof to make the space a bit more habitable in the winter? The floors to the living area below are already insulated and we have a gable mounted fan which is great in the summer. I am thinking of adding insulation to the roof with baffles underneath for air circulation through the soffit vents. Am I anywhere near an idea that may work?
- Such an interesting question when you sit down to answer it. First off, if there are any vents to the exterior, its not likely that you will want any additional heat to enter the space, as it will flow out of the vents to the outside and cost far more money than heat that is lost by thermal transfer, through the doors, windows and insulated walls and ceilings. So, any increase in the source of heat would mean closing the system to outside air vents like the fan and the soffit vents. If you want to heat the space, you'll need to insulate the roof by adding fiberglass batting to the space between the rafters and then drywall or panel depending on local building code and your preferences. Then you'll need an avenue for heat to reach the attic which can be as simple as cutting a couple of floor grates through to the heated space below, but you'll want cold air return ducting to send the cold air that is displaced by the heated air back down to the furnace. Then you'll need to seal the gable fan and insulate, perhaps with a box you can remove in the spring and replace in the fall. Now that the attic is integrated in the HVAC system, you no longer need the soffit vents. If you don't have a forced air system, there is less concern about the cold air return, as your heat source would be in the room or you can just use floor grates on opposite ends of the room for both the warm air and cold air exchange. Place one near the heat source below and one well away from it.
- Q: The attic was converted into two rooms and I want to add insulation but the space between the ceiling of the rooms and the roof is about 5 inches? How should I do this?
- It sounds like you will have to use blown insulation. They will drill holes in the walls to blow the insulation in. Over time, this type of insulation will drop down or compress; so you will have to top it off over time. You might also add acoustical tile to the exiting ceiling to add a little more insulating value.
- Q: I added a screened room to my mobile home. I also have vinyl windows. in the summer the sun beats down on the home almost all day Someone told me I could have insulation installed in the roof panels, and that i may even be able to do it myself. Right now it's impossible to enjoy my patio between 1-5pm because it so hot you can't breath. I'm in the Pasco, FL area - 34667Appreciate any help you can give
- Mobile home refoofing, I had it done, and they did it in one day. They came and installed 2inch foiled insulation right over the existing roof. Then they installed new roof panels..Unbeliveable how much cooler in the summer and warmer in the winter. It will pay for itself living up here in the Northeast..
Send your message to us
Battle Creek Roofing Insulation Company Rockwool Blanket for Thermal Insulation
- Ref Price:
-
$5.00 - 10.00
/ m²
- Loading Port:
- Tianjin
- Payment Terms:
- TT or LC
- Min Order Qty:
- 10000000 m²
- Supply Capability:
- 10000000000 m²/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
