Eps Foam Board Reflective Film XPE with Aluminum Foil Facing
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 3000 m²
- Supply Capability:
- 100000 m²/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Reflective Film XPE with Aluminum Foil Facing
Product Introduction:
Aluminum Woven Fabric Foil can be installed on roof,wall or floor,resist over 80% external heat from buildings, protect wall, resist thermal shock and sudden cold,etc.
1:It is made from aluminum foil and polyethylene through special machinery.
2:Certified by ISO9001,ISO14001,AWTA and SGS.
3:Both heat&cold insulation. Energy-saving
4:Moisture barrier, waterproof, 97% sun reflection. absorb sound.
5:no corrosion, no pollution, no harm to people
6:light in weight, easy to install.
Specification:
Name | XPE with Aluminum Foil Facing |
Appearance | Silver/Customized |
Structure | Aluminum Foil/PE/XPE/Aluminum Foil |
Width(cm) | 100-150 |
Length(m) | 50-200 |
Unit Weight | 260g/m2 to 360g/m2 |
Thickness | 3mm to10mm |
Emissivity | 0.03-0.04COEF |
Thermal Conductivity | 0.035W/M0 |
Reflectivity | 96%-97% |
Water Vapor Transmission | 0.012g/m2KPA |
Tensile Strength(MD) | 80N/25mm |
Tensile Strength(CMD) | 70N/25mm |
Treatment | FR/UV/VCI/Perforated available |
Temperature Resistance: | 4 hours no decladding -60℃/180℃ |
FAQ:
1. Where is your factory located in?
Factory is located in Jiangsu Province, Neat to Shanghai Port.
2. How long have you been in this product production?
We have been in the business more than 10 years,
3. Can we have some sample or trial order before bunk order?
Yes, we can provide you some free samples, and for trial order, we will offer you the lowest price.
- Q: Is polystyrene a polycyclic aromatic? Is not all the hydrocarbon chemical products are carcinogenic, such as the production of foam raw materials: polystyrene
- In the installation of two wall can be removed after the wall) → third, four-step large bar and a small bar → with a bar → then pole → plus scissors support → shop Scaffolding (yuan extension fastener steel scaffolding erection sequence)
- Q: How to distinguish which is the extruded board which is polystyrene board?
- Wood stents are stronger but heavier. This also points outside the wall insulation and insulation, simply that insulation material is outside the wall insulation, in the Indoor is the insulation, insulation is not necessarily all do, if the external walls of dry hanging stone, generally only cold bridge and hot bridge parts, popular argument is the wall and beam transfer position, window cornice, wall and column connection location, These locations are different materials transfer position, their thermal conductivity is different, so it is likely to cause condensate.
- Q: What kind of insulation material insulation effect is good
- High fall, object blow, electric shock, collapse, mechanical damage (lifting damage).
- Q: What are the main types of insulation materials for building exterior wall
- Fastening steel pipe scaffolding erection sequence: placed sweeping large bar → root by root to establish the pole (then with the sweeping large bar buckle) → installed a small cross bar (then with the pole or swept the big bar buckle) → the first step of a large cross-stalk (then with the pole fastening) → An early step small bar → installation of the second step of large cross-cutting → installation of the second step of the small bar → add temporary oblique strut (upper And the second step of the big cross-fastening
- Q: XPS Extrusion foam insulation board is a batch of how much
- Helmets, safety nets, seat belts, protective gloves, protective masks, goggles; tower cranes, construction lifts, construction hoists, mixers (concrete, mortar)
- Q: Polystyrene foam board in recent years, how the market situation
- "The more dangerous part of the project safety management approach" to build quality [2009] No. 87 in the "four scaffolding project" is to carry out expert certification scaffolding: . set up a height of 50 meters and above floor-type steel scaffolding . erection of height of 150 meters and above the attachment of the overall and scaffolding upgrade scaffolding works. . the height of the body 20 long chun bandit bandits to see help color burst Ji Mie and above cantilevered scaffolding works. In principle, by the construction unit to prepare a special safety construction program, reported to the Ministry of Supervision after the initial examination of qualified, and then by the construction unit or general contracting units organized expert certification meeting, the cost of the construction side or the general contractor to pay.
- Q: Balcony wall insulation with polyurethane or extruded board is good
- Each of the four corners of the insulation board, a center, a total of five
- Q: What is the glue on the sticky extruded board? The difference between sticky and plywood and sticky extruded plastic
- Wall insulation, then the best use of extruded board, it is higher than the density of benzene board, the natural insulation performance will be better. Because it is a slope of the top, so the outdoor insulation, then there will be some difficulty in construction.
- Q: External wall insulation board polystyrene foam board thickness of not less than how much
- The heat transfer of the material is more difficult (that is, the smaller the thermal conductivity), the better the thermal insulation performance Generally speaking, the common characteristics of thermal insulation materials are lightweight, loose, porous or fibrous, with its internal non-flow of air to block the heat conduction One of the inorganic materials are noncombustible, the use of wide temperature, chemical resistance and other characteristics of good, organic materials, forging out forging pedal fist, but there is a low water absorption, impermeability and other characteristics Polystyrene running plastic has two types of intumescent and extruded, self-extinguishing after adding flame retardant Expanded polystyrene sheet due to light and convenient, the use of very common; Extruded polystyrene high strength, excellent weather resistance, there will be greater development Polyurethane foam according to the different materials used, divided into polyether and polyester type two, made by the foam reaction, there are soft and steary of the points In addition, there is a kind of aluminum foil insulation material, the use of aluminum foil and kraft paper after bonding, and corrugated paper made of composite sheet can also be made of polyvinyl chloride sheet made of aluminum can be multi-layer set, as a sandwich wall or roof, Light, moisture, insulation, heat insulation performance are good
- Q: Apf-405 self-adhesive polymer modified asphalt waterproof membrane how much money
- Employees are the main body of the improvement activities, the company from the staff into the factory, that is, adhere to the "love my company" as the core of education, "create endless improvement" based on self-improvement education, "the market is the market" Crisis Education
Send your message to us
Eps Foam Board Reflective Film XPE with Aluminum Foil Facing
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 3000 m²
- Supply Capability:
- 100000 m²/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
