PVC Fixed Window with Soundproof and Double Glass and Dust Resistance
- Ref Price:
-
- Loading Port:
- Qingdao
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 50 set
- Supply Capability:
- 1000 set/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
China CE certificate dust resistance PVC fixed window factory
1. Brief Introduction
aluminum alloy window, plastic steel window, alu-wood window. There are casement window, top hung window, sliding window, tilt turn window and louver window. Also manufactures products according to buyer’s dimension, quantity, drawing or other related requirements.
| steel window (Fixed window with Soundproof and Double Glass ) | ||
Item | Description | Remark |
| 1.Type | steel window | |
| 2. Model | 60 series | |
| 3. Material | steel | |
| 4. Type of glass | Single glass, double glass, double glass Low-E, triple glass, triple glass Low-E, laminated glass | May be customized |
| 5. Thickness of glass | 4mm, 5mm, 6mm, 8mm, 10mm, 12mm | May be customized |
| 6.Hardware fittings | Selected from top-ranking Chinese brands and some German brands | May be customized |
| 7.Colors | Referring to the color card | May be customized |
| 8. Accessories | Terpolymer EP rubber strips, stainless steel screws, etc. | |
| 9.Certificate | ISO certificate | |
| 10.Performance parameters | Sound: GB/T 8485-2008 | 25≤RW<30db |
Resistance to wind load: GB/T 7106-2008 | 4.0≤P<< span="">4.5kpa | |
Air tightness: GB/T 7106-2008 |
| |
Water tightness: GB/T 7106-2008 | 250 ≤p<< span="">350pa | |
Heat transfer coefficient: GB/T 7106-2008 | 2.5>K≥2.0W/(m2·K) | |
Horizontal tension: GB/T 7106-2008 | <100n< span=""> | |
| 11.Opening mode | Fixed window | |
| 12. Product characteristics | The adoption of the welding and chamfering processes guarantees the strength of doors and windows, guards against leakage of water, and makes the product more aesthetic in appearance. | |
| 13. Window screen | Glass fiber | |
| 14. Product style | Customizable | |
| 15. Application | Residence,apartments,hotels,office buildings | |
| 16. Surface treatment | white, co-extrusion, laminating, spray coating | |
| 13.Product advantages | 1. Via a series of processing procedures such as cutting and welding, Yuhong plastic steel door and window sections used for doors and windows are made into door and window frames. Meanwhile, steel lining is added into the cavities of sections to enhance their rigidity. Then a high-quality plastic steel door or and window is assembled as a whole, with an error of not more than 0.2mm. 2. By developing independently accessory moulds to optimize the features of its plastic steel doors and windows, Yuhong plastic steel doors and windows are free from the problem with inferior performance caused by the inadequate adaptability between sections and hardware, which are always from different manufactures. 3. Corrosion resistance: Yuhong doors and windows have good corrosion resistance due to the unique formulation of their sections, and all the accessories all dedicated anti-corrosive hardware, which will not be corroded even in severe circumstances. 4. Weathering resistance: the addition of stabilizer, anti-ager and modifying agent to the section formulation in a suitable proportion enhances the weathering resistance of sections, which will not discolor even after many years of service. 5. Fire retardancy: Yuhong doors and windows, which do not combust themselves, nor contribute to combustion, is safe and reliable. 6. Insulation property: Yuhong doors and windows do not conduct electricity due to their superior electric insulation property, and thus have a high level of safety factor. | |
- Q:Can YOUHOOS at Yahoos give me an idea where I can find a sheetof heavy clear/ or even transparent plastic to put over my window thatnot like this cheap garbage I used from Frost King at home depot.. The last stuff came from a roll and was heavy duty and I don't need a roll of it, I'm just drawing a blank here. And this boxed up stuff sold in cheap discount stores really is garbage 1 mil junk.. Oh, and yes, this is their outdoor stuff , not the shrink indoor kit.... The window is about 4 ft x 6 ft..... 1950 era.....(hence the need for plastic ). I've got a few smaller as well... Thank You hoos....
- This Site Might Help You. RE: Heavy clear plastic to cover window? Can YOUHOOS at Yahoos give me an idea where I can find a sheet of heavy clear/ or even transparent plastic to put over my window that not like this cheap garbage I used from Frost King at home depot.. The last stuff came from a roll and was heavy duty and I don't need a roll of it, ...
- Q:What type of plastic are car windows made out of? (10 PTS BEST ANSWER)?
- Plastic Car Windows
- Q:I try to get paint of my caravan windows but it didnt work with stripper. any other suggestions.
- I agree. nail polish remover does not remove. it ruins it further. might as well use oil based thinner but is it's still not working then you might need to replace the window.
- Q:Where can I buy some plastic to put up to my windows for the winter? ?
- You can find plastic weatherization kits at your local building materials dealer ( they will appreciate your business more than the boxes and are just as good a deal! ) The easiest kit to use has clear plastic that you tape around your window then you use a hair dryer to shrink it and take the wrinkles out..... Very simple!
- Q:We live in an old, very poorly insulated house, and it's very drafty/cold during the winter. We've tried two-sided insulating tape that you put in the window sills, caulk strips that you put around the frame, etc. and none of it works. Is it worth the money to buy the plastic that you can put over the outside of your windows? The draft seems to be coming from where the window itself meets the sill, but also around the perimeter of the window (where the edging/molding is attached to the wall). I've read a few articles online about quot;how toquot; install plastic, but they all say that the plastic comes in kits and you need to attach it with the included double sided tape to your wooden window frame. our house is brick and there's not much of a frame outside. What little wood there is has been painted over many times, and I doubt tape would stick to it. Should I try to do it anyway? Is it worth the cost?
- Carefully remove the decorative molding from around the window.(inside) Then either stuff fiberglass insulation in the crack between the window and the jam. Or use the foam insulation in the can. Then replace the molding. A lot of people put plastic on their windows using staples
- Q:I have a plastic windshield that I want to tint, but have run into some problems. I tried getting a tint shop to place a film over it, but the surface was too curved. Is there another method that I can try? Is there any kind of spray or dye? Also, I would like mirror tint. Is that possible? The plastic can flex a little, so it has to be able to withstand that.I don't have to worry about whether or not the tint complies with the law. So, there are no restrictions.
- I just would check with a different tint shop. I ran into that issue with my rear window on my car. A few different shops said they couldn't do it because of the size and how curved it was. Bottomline they just didn't want to go through the hassle. I found a shop that was willing and it turned out great. As for the spray tint VHT does make a product called night shades. I've seen it used with mixed results. On something small like taillights it good. But for a a large window you might have issues with consistent coverage. The tint might look blotchy when your done. Once again I would just look at finding a different place to do the tinting for you.
- Q:Some dark spots where my stove cover leans on it during cooking (no heat problem) I just don't want to scratch the window.
- the best plastic cleaner I've ever used is meguires plastic cleaner then follow it up with their plastic polish , it truly works miracles , you won't be disapointed
- Q:my friends tagged my jeep like last may for the end of skool with window chalk... i got the stuff on the front and body off but the plastic windows left a light but noticeable stain... and they just tagged it again for the start of skool and im having a real hard time getting this one off is there a trick or something to buy to get this stuff off... o yea and i have a tear in my jeep window is there a way to fix that without tape like melting it back together or some waterproof glue Solution
- you can try paint thinner on a rag .....not sure if it will take the stain out of the plastic or not but it should get the chalk off without a problem. not sure what to tell you about the rip in the window tho....sorry. hope the paint thinner works for you, just use caution cause the thinner is a harsh chemical. good luck. it might burn ur skin a little but wash with soap and water afterwards....your skin and the window to play it safe.
- Q:I just had my 30 yr old storm windows replaced with nice double pain, double glazed, argon filled windows in November. HUGE IMPROVEMENT! But now that i am used to comfort level and energy savings that these windows have made to my home. I find myself looking for the tiny amounts of cool air that penetrates into my home. And I still have this habit of wanting to put plastic over my windows. Do you think adding the plastic now would be overkill? Or would the energy savings still out way the cost of the plastic this first week on January?
- sit back and relax. if you have extra money you want to spend, i cuold use new windows in my house. you may want to find a hobby to take your mind off puting plastic over everything. HAVE A GREAT '08!
- Q:Will covering the windows with thick painters plastic drastically help the window A/C unit cool the house down?Also, should i insulate the floor?
- Make sure the windows are closed (sometimes they slip from the top - be sure to check that). Using solar film will help but it is rough to work with, replace the screens with solar screening as it is easier and does help quite a bit. Insulating the floor will do very little, extra insulation in the attic is the way to go. Be sure to replace the AC filter as that could be clogged with dust. On very sunny days close the blinds or shades to help prevent heat build-up.
1. Manufacturer Overview |
|
|---|---|
| Location | |
| Year Established | |
| Annual Output Value | |
| Main Markets | |
| Company Certifications | |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | |
| Export Percentage | |
| No.of Employees in Trade Department | |
| Language Spoken: | |
| b)Factory Information | |
| Factory Size: | |
| No. of Production Lines | |
| Contract Manufacturing | |
| Product Price Range | |
Send your message to us
PVC Fixed Window with Soundproof and Double Glass and Dust Resistance
- Ref Price:
-
- Loading Port:
- Qingdao
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 50 set
- Supply Capability:
- 1000 set/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
