PRODUCT NAME:High quality Power Stacker CG1646
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 unit
- Supply Capability:
- 1000 unit/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
 PRODUCT INTRO |
CG1646 Smooth travel and lift with excellent controls to reduces product damages and increases productivity. European driving unit European pump station |
Residual Capacity at different lifting height
1KG=2.2LB 1INCH=25.4MM
Up to h3 mm | ACTUAL CAPACITY (Q) kg | |
2500 | 1600 | 1000 |
3700 | 1000 | 600 |
4600 | 800 | 500 |
Load centre distance (C)mm | 600 | 700 |
1KG=2.2LB 1INCH=25.4MM
Identification | 1.2 | Manufacturer’s type designation | CG1646 | ||
1.3 | Drive:electric(battery or mains),diesel, petrol, | electric | |||
1.4 | Type of operation:hand,pedestrian,standing, | Pedestrian | |||
1.5 | Load Capacity /rated load | Q (t) | 1.6 | ||
1.6 | Load center distance | C mm | 600 | ||
1.8 | Load distance, centre of drive axle to fork | X mm | 795 | ||
1.9 | Wheelbase | y mm | 1310 | ||
Weights | 2.1 | Service Weight | Kg | 1365 | |
2.2 | Axle loading, laden front/rear | Kg | 1410/1555 | ||
2.3 | Axle loadings, unladen front/rear | Kg | 1010/355 | ||
Wheels, | 3.1 | Tyres:solid rubber, superelastic, pneumatic, | polyurethane | ||
3.2 | Tyre size, front | 250x78 | |||
3.3 | Tyre size, rear | 80x70 1) | |||
3.4 | Additional wheels(dimensions) | 150x54 | |||
3.5 | Wheels, number front/rear(x=driven wheels) | 1x+2/4 | |||
3.6 | Track width,front | b10(mm) | 880 | ||
3.7 | Track width,rear | b11(mm) | 390/515 | ||
Basic Dimensions | 4.2 | Lowered mast height | h1(mm) | 2098 | |
4.4 | Lift height | h3(mm) | 4514 | ||
4.5 | Extended mast height | h4(mm) | 5090 | ||
4.9 | Height of tiller in drive position min./max. | h14(mm) | 965/1365 | ||
4.15 | Lowered height | h13(mm) | 86 | ||
4.19 | Overall length | l1(mm) | 1950 | ||
4.20 | Length to face of forks | l2(mm) | 800 | ||
4.21 | Overall width | b1(mm) | 1050 | ||
4.22 | Fork dimensions | s/e/l(mm) | 60/180/1150 | ||
4.25 | Width over forks | b5(mm) | 570/695 | ||
4.32 | Ground clearance, center of wheelbase | m2(mm) | 26 | ||
4.33 | Aisle width for pallets 1000x1200 crossways | Ast(mm) | 2440 | ||
4.34 | Aisle width for pallets 800x1200 lengthways | Ast(mm) | 2440 | ||
4.35 | Turning radius | Wa(mm) | 1605 | ||
Performance | 5.1 | Travel Speed, laden/unladen | km/h | 5.1/5.5 | |
5.2 | Lift speed, laden/unladen | mm/s | 113/160 | ||
5.3 | Lowering speed, laden/unladen | mm/s | 95/100 | ||
5.8 | Max.gradient performance, laden/unladen | % | 6/12 | ||
5.10 | Service brake | Electromagnetic | |||
E-Motor | 6.1 | Drive motor rating s2 60min | kw | 1.2 | |
6.2 | Lift motor rating at s3 15% | kw | 3.0 | ||
6.3 | Battery acc. To DIN, no | 4PzS | |||
6.4 | Battery voltage, norminal capacity | V/Ah | 24/280 | ||
Others | 8.1 | Type of drive control | MOSFET Control | ||
8.4 | Sound level at driver’s ear acc.to EN12053 | dB(A) | 67 | ||
1)Single wheel Φ80x93 | |||||
- Q: who bought electric machinery corp?
- There okorder / Hope this helps!
- Q: I need to know where I can find transporters of machinery and cars from the East coast to the West coast. All I can find is brokers witch are expensive and I know they don't pay much to the truck owners. How can I slash that middle broker. Any web pages?Thanx for help.
- You have to understand the way auto transport industry works... Drivers make money by driving their truck... They get paid per mile... Any second they waste on the phone doing sales or customer service they LOSE money. Brokers have tools to find the best driver for your needs between 5,000 drivers that live in their trucks on the road. Please read the article source box... Call us for FREE no obligation estimate - We don't charge anything till you approve pickup and delivery dates. (800) 516-3440
- Q: I am restoring an older , but good piece of machinery. It sat for many years, so it's really really dirty and showing some rust and paint wear. I do not want to wash it and get water all over it so it starts rusting the gearing, and tooling surfaces. What do you recommend to start getting this beast clean, so I can work on it without getting really, really dirty? Is there a spray or should I use something like ...WD-40? How about the chemical RESTORE they show on the $19.95 TV Ads??? Used to restore the faded paint on a car or clean the headlight lens from oxidation??
- There are degreaser products, but those are fairly aggressive and intended for really gummy congealed lubricant removal. WD-40, while less aggressive, is still a pretty good solvent as well as a light lubricant. If you need a lot of it, they sell it in 1 gallon cans (and probably larger sizes for industrial use), and they have pump sprayers to use with that size. I think a product for use on headlights or faded paint would be more of a polish than a degreaser, so that would not be appropriate unless you're trying to clean up a plastic viewing window or some such plastic guard, shield, etc.
- Q: Should we destroy and ban as much technology as we can. Anything that didn't exist before 1800? As anyone literate in weaponry would know that bows and arrows accompanied by a personal choice of knife, sword or hatchet are far more effective than the muskets and blunder busters in real warfare.
- No. In fact, the government should lay off my enriched uranium. I have absolutely no freedom and it's clear we have a fascist government because they won't let me stockpile enriched uranium. If you outlaw home-made nuclear devices, only outlaws will have home-made nuclear devices.
- Q: How often does pretzel machinery involve the use of cannibalism?
- a lot more than anyone would admit ...
- Q: Yeah, that's pretty much the question.....10 points to best.
- Hmmm, this is like asking how having a power cable be used to run a TV. A tv can't run without it. It's there are a lot of other things/factors/processes that enable the tv to run, but the power cord is still mandatory. Likewise for atp/adp recycling. It's not really used to run the machinery. It's a mandatory part of the metabolism of a cell. When ATP us used, energy is released from the ATP molecule. The byproducts of the reaction are reused. You can sort of think of them as rechargeable batteries.
- Q: History of Chinese machinery development
- China in about 40 to 500 thousand years ago, there have been processing crude scraperschoppers and three prismatic tip like device primitive tools. 4~5 years ago appeared grinding technology, many stone tools have been relatively smooth, blade is also sharp, and has a single edge, double blade, convex blade, concave blade and round blade of the points.
- Q: pls help me on the above question
- What type of finance should be used to finance the following: a) purchase of heavy machinery Preferably from shareholders, either by issuing common stock or debentures. Otherwise, a finance lease or regular loan from a bank. b) building of new premises Mortgage loan from a bank. c) a short term liquidity problem Temporary bank overdraft, or deferred credit, e.g. issuing notes payable to creditors, or factoring accounts receivable
- Q: any indian links for machinery and equipment?
- find as many as links from below site
- Q: how i can access to free farm machinery manual in the internet?
- It okorder / Free! I doubt you will find anything especially if you are looking for tech info. the last one I bought about ten years ago cost me over ? 400 ( $800)
Send your message to us
PRODUCT NAME:High quality Power Stacker CG1646
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 unit
- Supply Capability:
- 1000 unit/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
