Wheel-loader: FL956F-II,Using the Dual-Pump Flow-Converging System
- Ref Price:
-
$100,000.00 - 300,000.00
/ unit
- Loading Port:
- Shanghai
- Payment Terms:
- TT or LC
- Min Order Qty:
- 1 unit
- Supply Capability:
- 10 unit/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Brief Introduction
A leading manufacturer of construction machinery, agricultural equipment and vehicles. Its revenue in 2012 reached RMB 17.76 billion. In 2012, Foton Lovol brand value climbed to RMB 17.736 billion, ranking the 64th among China's top 500 most valuable brands by virtue of its outstanding performance in "Essential growth, structural adjustment and globalization". The Company has been identified as the "national key high tech enterprise" its engineering and technology research institute as the "nation certified enterprise technology center", and moreover, its leading products have been awarded as "Chinese famous brands", "well known trademarks in China" and "most competitive brands on the market"
Main Features of Wheel-loader: FL956F-II
1.The vehicle uses the excellent WEICHAI engine which is reliable, low in noise and low in oil consumption. Alternatively, the SC11CB220G2B1 engine or 6CTA8.3-C215 engine is optional.
2.Using the dual-pump flow-converging system, the hydraulic system is substantially energy-efficient. The fully hydraulic flow-amplified steering system provides easy and agile steering.
3.The 360°panoramic cab provides an increase of interior space by10% for maximum visibility. The cab uses the reinforced framework and floor platform to keep drivers safe and comfortable in a productive environment.
4.The plate-fin aluminium radiator provides the complete radiator with higher strength and optimized heat dissipation performance. The more excellent heat dissipation effect allows the vehicle to operate normally at 50℃ for a longer time.
5.Using the 4-plate support structure widely applied in Europe, the front frame provides the complete vehicle with improved torsional capacity by 56% to allow the vehicle to work more smoothly, thereby substantially extending the service life of the complete vehicle.
6.Using the independent heat dissipation technology, the condenser enables the air-conditioning system to improve refrigeration and heating performance, thereby increasing the cab ventilation by 50% and keeping the drivers comfortable.
7.The distance sleeve added between the two bearings allows the bearing clearance to be adjusted strictly, increasing the service life of articulation by 50%.
Main specification of Wheel-loader: FL956F-II
| Complete machine parameters | |
| Rated load(kg) | 5000 |
|---|---|
| Operating mass (standard)(kg) | 16940 |
| Bucket capacity(m³) | 3 |
| Boom lifting time(S) | 5.7 |
| Sum of three items(S) | 10.6 |
| Max. traction force(kN) | 160 |
| Max. breakout force(kN) | 180 |
| Running system | |
| Forward speed range(km/h) | 0-42 |
| Travel Speed Reverse(km/h) | 0-17.5 |
| Gearbox shift | Front :2 gears rear: 1 gears |
| Max. gradeability(°) | 29 |
| Steering angle(°) | 37°+-1° for right and left each |
| Tire model | 23.5-25 |
| Service brake | air-oil four wheeled caliper disc brake |
| Parking brake | Drum chamber brake |
| Center of Outside tire(mm) | 5930 |
| Outside of the bucket(mm) | 6910 |
| Hydraulic system | |
| Working System Pressure(Mpa) | 18 |
| Working System Displacement(ml/r) | 100 |
| Steering system pressure(Mpa) | 16 |
| Steering System Displacement(ml/r) | 80 |
| Oil tank(L) | 210 |
| Working scope | |
| Overall Dimension(mm) | 8080×2980×3410 |
| Wheelbase(mm) | 3250 |
| Track(mm) | 2150 |
| Min. grounding distance (at hinge position)(mm) | 440 |
| Dump Height – fully raised,45°dump(mm) | 3130 |
| Dump Reach – fully raised,45°dump(mm) | 1150 |
| Engine parameters | |
| Model (Weichai) | Weichai WD10G220E23 |
| Type (Weichai) | Six-cylinder, in-line, direct injection, turbocharging, and water cooling |
| Horsepower(Kw/rpm) (Weichai) | 162/2000 |
| Peak Torque/Speed(N.m/rpm) (Weichai) | 900/（1300～1500） |
| Bore×Stroke(mm) (Weichai) | Φ126×130 |
| Displacement(L) (Weichai) | 9.726 |
| Fuel consumption rate at rated working condition(g/Kw.h) (Weichai) | 225 |
| Fuel Tank(L) (Weichai) | 280 |
| Model(Shangchai) | Shangchai SC11CB20G2B1 |
| Type(Shangchai) | Six-cylinder, in-line, direct injection, turbocharging, and water cooling |
| Rated power(Kw/rpm)(Shangchai) | 162/2200 |
| Max. torque / speed(N.m/rpm)(Shangchai) | 844（1±6%）/1400 |
| Cylinder bore x stroke(mm)(Shangchai) | Φ121×152 |
| Displacement(L)(Shangchai) | 10.45 |
| Fuel consumption rate at rated working condition(g/Kw.h)(Shangchai) | ≤235（1±5%） |
Images of Wheel-loader: FL956F-II
FAQ of Wheel-loader: FL956F-II
(1) What’s the main features of Hydraulic system?
Hydraulic system is designed to enhance engine performance, resulting in a more efficient system.
Two variable pumps and two gear pumps combine oil and redirect the flow to where it is needed, allowing for simultaneous operation without loss of power
Smooth operation, even while using the boom and arm during turning.
Two-way and one-way auxiliary flow valve with return to tank feature is standard equipment.
(2) How about Boom design?
Thick side plates with precision welding provide both strength and protection.
Heavy-duty cylinder guards protect exposed cylinders and rods from damage.
Integrated boom light illuminates the work area and allows for safe and effective operation after dark.
- Q: What is the pay rate for heavy machinery
- That really depends where you work. Big mines you can be making over $60 per hour. I'd say $18-$25 per hour is more average.
- Q: Looking specifically for Farm Construction Machinery Industry's sales and net income for 2006, 2007, 2008, 2009, 2010. If you can access it through some paid research website or whatever I normally should have access to it because i'm a purdue student
- i do no longer think of there is any distinction between being efficient and consumptive. Oil won't final continuously, yet timber are renewable, and the genuine source of potential on the planet is the solar which we are only beginning to faucet. Oil particularly can get replaced as an potential source, and it could be. as quickly as a threat.
- Q: What is mechanical engineering?
- There are many types of heavy, heavy, bridges. Machining and so on, what you say is only a general term
- Q: Application of lean production in construction machinery
- Lean thinking (1ean thinking) is the theory of systems extracted from production (1ean). Lean production originated from the TOYOTA TPS (toyot production system) of Japan's Toyota Corporation
- Q: Like a Ford 8N tractor, and an old hay rake. The seat is on a hinge, and the farmers (men) always leave the seat up.Do men have some kind of primordial urge to leave seats up? Why did they even make the seats on a hinge? Probably designed by a man.Isn't this the most sexist thing you ever heard?
- That is so if you fall off of it when operating it the seat will spring up and kill the engine. Even my lawnmower has that feature. No one wants to be run over by their own tractor. It has a seat but no engine? How does that work? Maybe it is to keep the seat from getting rained on or baked as others have suggested.
- Q: What is the difference between the blue shaft and the black shaft of the mechanical keyboard?
- Personal feeling, if not typing too fast, or green axis better, a strong sense of paragraph, sound is very sensitive, especially a sense of rhythm. Black shaft feels long, hands a little tired. As for the backlight, if you can comfortably, feeling just a backlight decoration really.
- Q: Is it illegal according to OSHA, to work alone with machinery?
- There is no OSHA standard that addresses that. If the machinery poses an unusual hazard for one person than they may be cited under the general duty clause. It is difficult to answwer because your question is rather vague and doesn't explain the situation. Maybe I can give a better answer with more details, sorry. ADDED: I tried to return your message with the additional details but your email wasn't confirmed. If the employees are working alone, do a job hazard analysis and use diligence in reducing the probability of accidents occurring, either through additional safety devices such as interlocks, or additional training. When employees work alone they are more likely to cut corners and when they are on overtime fatigue can contribute to a higher risk of accidents.
- Q: We manufacture machines and we need to supply a machine to India. In the U.S. the machine uses 240 VAC 3-phase, so we need to know what 3 -phase voltage is available in India.
- Well if you keep whipping Habib , Punjab and Cockschmell they should keep peddling and give you 220 volts on all 3 legs but it's only 50 hurtz not 60 . We don't wanna break em !!
- Q: can the cost of delivering a piece of machinery be assessed as part of a property's value?
- No. It is a business expense, and does not increase the value of the machine... Best wishes
- Q: why was machinery the most powerful weapon in the war of capital against the working class?
- Yeah, lets destroy all automation...lol Idiot !
Send your message to us
Wheel-loader: FL956F-II,Using the Dual-Pump Flow-Converging System
- Ref Price:
-
$100,000.00 - 300,000.00
/ unit
- Loading Port:
- Shanghai
- Payment Terms:
- TT or LC
- Min Order Qty:
- 1 unit
- Supply Capability:
- 10 unit/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
