Polished Porcelain Tile TT36055 with Top Class
- Ref Price:
-
- Loading Port:
- China main port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1400 m²
- Supply Capability:
- 10000 m²/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Product Description:
Primary Competitive Advantages Polished Porcelain Tile ST36046 :
First choice,top grade.
Water absorption:<0.1%.< p="">
Delivery Time:15~25 days after deposit.
Certicate: CE,ISO9001,Soncap,etc.
Competitive price and good quality
Usage— Suitable for home, high grade office buildings, high-grade hotel, airport, shopping mall,
deluxe clubs floor and wall tiles etc.
This series of products in addition to good wear resistance with ultrafine tiles, flexural strength,
and low water absorption, the appearance of the product, due to be fired into a crystal frit, so
three-dimensional effectprominent, white the texture clear, natural, delicate harmony and balance without duplication, with impeccable decorative effect, close to natural stone.
Technical characteristics:
Adopt international advanced ceramic cloth exquisite processing technology, selected high
quality pure raw materials, on the product body, with moist and gorgeous color, microcomputer
total precision control, multiple temperature control forming technology create gorgeous texture
hd grain boundary, bottom dense embryo thicker, pure texture, deduces the natural stone material through the external environment and the geological characteristics and the dynamic form of change,
also make products with high hardness, high gloss, low water absorption, strong dirt resistance, easy
to clean, etc excellent characteristic
Main Export Markets:
Mid East/Africa
Central/South
Asia
Australasia
Southeast Asia, Mideast Asia
Product Specification
Tile Type: Polished Porcelain Tile
Quality standard: GB/T4100-2006, ISO13006, ISO9001
Water Absorption Rate: 《0.5%
Breaking Strength: 》 1800 N
Rupture Modulus: 》40 MPa
Length and Width Tolerance: ±0.1%
Surface Smoothness: ±0.15%
Edge Straightness: ±0.15%
Wearing Strength: 《1600 mm3
Glossiness: 》 85 Degree
Resistance to Chemical: Class UA
Resistance to Staining: Class 3.
Product Picture :
Production Line :
Product Certificates :
Packing Details :
FAQ
1. For Polished Porcelain Tile, is the 30*60 available?
—— Yes, 30*60 is available. Due to the basic size is 60*60, we need to cut 60*60 tile into 30*60. 6 pcs are packed into one carton.
2. What is the MOQ for this tile?
—— Normally the MOQ is 1382.4 m2 for one 20’ container. To support our clients, we could go with 3 models to fill one container at most.
3. Can we use the carton with our own design and brand name?
—— Yes. Normally we go with Neutral Carton or our Carton with our CMAX brand name. But for carton of client’s own design, the MOQ for one size is 5 containers, due to the carton factory can’t arrange production if quantity is below 5000 pcs.
- Q: How is oriental Paul tiles?
- 7 test slip resistance This may be most of the staff of the tile shop will show you, so you directly on the tiles surface trample, feel slippery slip, but we think about what circumstances will be slipped on the floor tiles? Should be when there is water, some brick surface will be a very slippery water, will fall, so the test should be in the tiles surface sprinkle some water to simulate the real situation, and must personally step on the brick test , Some brick water will be more slippery, and some tiles will be more waterproof after the water, recommend this type. Before the test should first tile surface clean, because some of the brick surface to protect the wax, will greatly affect the accuracy of self-test. 8 other details In the process of selecting the tiles I suggest that we must go to the store to see, color and quality is difficult to see from the Internet, you can go to the store selected models, and then to the Internet to buy. No matter from which channel to buy, and businesses must be sure who is good delivery, is sent to the downstairs or sent to the home, is not free replenishment replacement. Because tiles such building materials is really very heavy, with their own simply can not move home. But also in the handling process is very likely to cause damage to the tiles, it is best to let the business to your handling, so that a problem can find him, if you find the construction team workers to move you, that tiles in the handling process is damaged, the basic It is your own money to replenish the goods. Finally, in fact, if you really do not want to bother to identify the quality of the tile, the most easy way is to buy big-name tiles, such as Nobel, Dongpeng, crown beads, etc., big brand tiles really trustworthy; but you still afraid of their own Can not buy good tiles, then you will pay more attention to our evaluation of the bar, if there is a good tiles we will recommend you to buy directly.
- Q: We had redid our cupboards a couple years ago and still have to properly cover the hole that was left for the vent on the previous vent system. It looks like they used staples of some type but the way it is just needing 1 and a half (or less) tiles it‘s awkward.
- Most ceiling tiles have a tounge groove so each tile fits into another. When you are piecing in tiles it's impossible to get the tounges in the grooves without breaking them. I would suggest, cutting off the tounges with a razor knife and install with Liquid nails or some other construction adhesive. To keep the tiles in place while the glue is drying, cut a 2X4 long enough and put it under the tile while the glue sets up. You might want to put a towell between the tile and the 2X4 to keep from damaging the tile. For the 1/2 tile, score the backside of a tile with a razor knife then break it in half.
- Q: I was quoted $5.75 for tile install and $2.25 for concrete board per square foot.
- If that is what you were quoted by someone who is going to do the job - then that is the going rate for them. Which is likely in line with what other installers of tile charge in your area. Get other estimates or quotes from the people who will actually do the job. There is no standard/going rate that is applicable in every city, in every state across the country.
- Q: We have a basic, square foot tiles - rough ceramic floor, standard grade in a white-ish shade (HATE IT!). It is always dirty looking! Nothing keeps it clean. Can we stain it or paint it like people do cement floors??? Anyone done this? How? Thanks!
- Accidentally staining or on purpose staining it is very hard to get anything to stick to ceramic tiles. Any paint even epoxy will wear off and look shabby very quickly. One way to distract people from the plain white is to take out tiles in a pattern and replace them with some colorful tiles that will draw people's attention from the main color. You can take out those tiles by using a hand grout saw to take off the grout surrounding the tiles you want to remove. Then smash those tiles in the center with a pointed centerpunch and a small hammer. Work your way out toward the edges of the smashed tile until you have cleared their entire square. That is where you are going to cement-in and grout the new colorful ones. It is time consuming but it will upgrade the floor and make people forget the basic off-white.
- Q: Bathroom Tiling Job?
- Ceramic tile or vinyl tile? Ceramic tile you need a total substrate of no lees than 1 1/4. This means you need to add a minimum or 1/2 to make it sturdy enough for tile . And the very best ting to use ( for the average DIY) is 1/2 cement board. And this needs to be properly installed. This will comply to ATC and TCA tile codes.. If your using a vinyl tile you possible can go over it all w/o underlayment but I strongly suggest a 1/4 wood underlayment such as luan. This gives you a clean surface to bond to. Any questions you can e mail me through my avatar and check my qualifications there. GL
- Q: after grouting a new tile floor (about 400 sq ft) and several moppings the finish is still somewhat dull. how do i clean the tile to bring back a nice glossy finish? Thanks
- Rise out a sponge, wipe it gently across the surface with one smooth stroke. Flip the sponge over and use the other side for the next stroke. Then rinse the sponge off again and repeat the process until you’ve wiped down the whole area. Resist the temptation to rinse the sponge less often.
- Q: What kind of ceramic tile?
- Glazed tiles: Glazed tiles are the bricks that are baked on the surface of the brick. In general, glazed tiles are rich in color and pattern than polished tiles, and at the same time play the role of anti-fouling. But because the glazed tile surface is glaze, so wear resistance than polished tiles. Classification According to the raw materials are divided into ceramic glazed tiles and porcelain tiles. According to the different gloss, and divided into two kinds of matt and light. Features: The scope of the kitchen should use bright glazed tiles, should not use matt glazed tiles, due to grease into the brick surface, it is difficult to clean up. Glazed tiles are also suitable for use in bathroom balconies and so on.
- Q: More specifically, do you lay the tile right against the floorboard with no groat visible? Or would you put a spacer in between the floorboard and the tile so that it you have grout along the edge?
- It is honestly all up to the look you prefer. I for example always remove the baseboards and put a quarter inch space in between the tile and the wall (gives you a seamless result). In doing so, when you put the baseboards back on the wall - any mistakes are hidden - and the job just looks more complete. You can however go the route you are talking about (I've seen it done) - and personally I think that adding a grout line is the way to go - mainly b/c not all walls are square - and the likelihood of you having a seamless edge against the baseboard is slim. Good luck,
- Q: Small size tiles for external walls
- Small tiles generally include 100mm * 100mm and 150mm * 150mm two or so, more than 200mm should not call a small tile, unless the individual himself.
- Q: I want to install tile over laminate. How do I do this?
- Do not lay Ceramic tile over the laminatee floor, you must remove the laminat and get to the sub-floor and remove it then put down sheets of durarock on the floor joist. If you are laying it on a concrete floor you must still pull the laminate up and have a clean level surface so the mortar will bond. If you don't remove the laminatee your tile will float on the laminat. Hope this helps.
Send your message to us
Polished Porcelain Tile TT36055 with Top Class
- Ref Price:
-
- Loading Port:
- China main port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1400 m²
- Supply Capability:
- 10000 m²/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
