Polished Porcelain Tile Single Loading Medium Black Color 6501
- Ref Price:
-
- Loading Port:
- Guangzhou
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1382.4
- Supply Capability:
- 10000 m²/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Product Brief Introduction
Polished Porcelain Tile Single Loading Medium Black Color 6501 is one of the most popular color of Polished Porcelain Tile Serie, which is one serie of Polished Porcelain Tile in the present market. Just like other series, it could be used for interior floor for apartment, villa, super market as well as other public areas, due to its being high glossy and clean, homogeneous color shade as well as the reasonable price compared with natural stones.
Product Features
Polished Porcelain Tile, Double Loading
Only Grade AAA available
Fast delivery
OEM service could be offered
Marketing support on samples, catalogues as well as carton designing
Professional sales team for product, document and schedule of importing and exporting.
Product Specification
Tile Type: Polished Porcelain Tile
Quality standard: GB/T4100-2006, ISO13006, ISO9001
Water Absorption Rate: 《0.5%
Breaking Strength: 》 1800 N
Glossiness: 》 85 Degree
Resistance to Chemical: Class UA
Resistance to Staining: Class 3.
Packing Information (For 27.5 Tons heavy 20’Fcl)
For 600x600mm, 4pcs/Ctn, 40 Ctns/Pallet, 960 Ctns/20’Fcl, 1382.4m2/20’Fcl
Production Line & Package
FAQ
1. For Polished Porcelain Tile, is the 30*60 available?
—— Yes, 30*60 is available. Due to the basic size is 60*60, we need to cut 60*60 tile into 30*60. 6 pcs are packed into one carton.
2. What is the MOQ for this tile?
—— Normally the MOQ is 1382.4 m2 for one 20’ container. To support our clients, we could go with 3 models to fill one container at most.
3. Can we use the carton with our own design and brand name?
—— Yes. Normally we go with Neutral Carton or our Carton with our CMAX brand name. But for carton of client’s own design, the MOQ for one size is 5 containers, due to the carton factory can’t arrange production if quantity is below 5000 pcs.
4. What exhibition we joined?
1). Canton Fair (every year)
2). Dubai Big 5
3). American Covering
5 What's the characteristics about porcelain tiles and glazed tiles? Which one
more slippery, more aesthetically pleasing and easy to clean?
Glazed tiles are colorful, the effect is rather diverse, stain-slip, abrasion resistance but worse than the porcelain tiles. Long-term use may wear a large surface; porcelain tiles have the higher degree, long hard wear surface. Good performance and stable cleanup (before playing the best times to use the wax to improve stain resistance).
- Q:This tile in my kitchen became loose a while ago and today I decided to try to fix it but not sure what to do. As you can see from the image link, a fair amount of concrete has come off with the tile. I suppose I can‘t re-use this tile. I have a spare one available. What I need to know is what product do I use to fill in the hole? Should I try to get out all the old concrete stuff first?
- Remove as much of the old stuff that you need to fit it back flush with the rest of the tiles then apply thick bed adhesive to the mesh and to the clean part of the tile and ease it on.
- Q:What is the use of ceramic tile?
- Use: the construction of the wall to be wet (outside the wet dry), and to maintain a certain degree of flatness, uneven or extremely rough parts of the application of cement mortar and other materials leveling; grass-roots must remove the floating ash, oil, wax, so as not to affect the stick Knot tiles in 5 to 15 minutes after the move can be corrected. Water-cement ratio of about 1: 4, after mixing the binder should be used within 5 to 6 hours (the temperature is about 20 degrees); the mixed adhesive applied to the back of the adhesive brick, and then Press hard, until the plain so far. Due to different materials and the actual consumption of different, generally at least about 4.5 to 6 kg per square meter, paste thickness of about 2 ~ 3mm. Use of common sense: 1, deacetal type: vulcanization speed, transparency is good, but in the curing process Release of acetic acid; with a pungent odor, but also on the metal, coated glass and some inorganic materials corrosion.
- Q:If you were going to tile an entire room would you start from the walls or floor? The room is only small 12m walls 4m floor is a basic toilet basin. There are no border tiles no fllor to wall tiles.
- i really dont know how to answer this question im really sorry but my moms boyfriend meant know i can talk to him and found the answer
- Q:I am putting in a wood stove and want to make a mural behind it - should I tile the board and then put it up, or tile it on the wall. I am using wall spacers and cement board. I want to make a mural of a tree - the wall is 8‘ by 3‘ - should I cover the whole wall or just the part behind the wood stove? do I need special grout?thanks for your answers
- Opinion: I would never tile anything and then try to move/install it. You will surely crack the tile or grout, even if it is on cement board. Besides, it will only make it heavier and more difficult to install. And generally, a mural will look better if it covers the entire surface... you can put neutral/fading-away-color tiles around the edges. Unless you have a plan to transition from the tile to a different non-flammable (non-painted) flat surface.
- Q:how do you clean up ceramic tiles? they dont seem to shine but look very dull whenever i clean it with water and soap. is there a product i can use to clean them and at the same time leave them shining?
- some tiles just don't have a shiny glazing. if the tile has a texture to it, then really that's all the shine it will have. if you have a piece that wasn't set, just extra, compare it to the set tile. the set tile should have the same shiny glaze as the extra piece. if the extra piece is shiner then there is a bit of a haze on the tile from grout residue. contact the manufacturer if possible and ask for cleaning suggestions. if not possible, start with a bit of vinegar in water and elbow grease.
- Q:The tiles were installed about 2 1/2 weeks ago, and we decided that we just cant live with the really wide grout lines that ended up gradually becoming huge. So we‘ll have to remove about half of the tile. Is it possible to remove and reuse these tiles? If so, what about the left-over thin set? Will it be stuck on the tiles? And what about the cement board under them? Is it reusable or easier to just replace? Thanks for any answers!
- big-must is right. You have to just take the loss and demo the project, starting over. You won't be able to salvage any of what you pull up or the boarding underneath it.
- Q:Dear Sir/Madami have question regarding installing tiles 30*30cm*2.5cm thick for hall and rooms my question is whats the min. and Max. cement mortar must be placed under neath tiles (i.e bond coat in between concrete slab and tile )please advice and thank for help and appreciated
- If you're using ceramic tiles (very regular size and relatively smooth/even back), use a 1/4 square notched trowel, held somewhere between 45 and 90 degrees (vertical). If you're using natural stone tiles (e.g. granite, marble, slate), go for 3/8 square notched trowel and back-butter the tiles. Make sure the concrete slab is clean, sound, free of cracks and level before you start and follow the instructions for your thinset. You'll likely want to use a modified thinset which will help bond to the concrete better. If you have any doubts about the stability of your slab, consider installing an isolation membrane between the tile and slab. Schluter's Ditra system is the best of the breed for this. If you use an isolation membrane, use unmodified thinset (instead of modified).
- Q:I have an on going problem in my kitchen. Same time tile floor was done in our home but kitchen is the problem. It was done 3-4 years ago by a contractor, however he never showed up his face to help us. He left some grout with us and said if ever the grout pops up then we can mix it in the water and fill with this mixture. The grout from the kitchen floor always comes out. Underneath, the kitchen is wood floor. The kitchen is on the second floor. Our family room is also on the second level but no problem to that floor Please help.
- It's nice if you have a Dremel tool to use,but if your like me you have already spent more than you wanted to on the new product and didn't anticipate on spending any more getting the old ones out. I would spend the little bit it would cast to get a grout removal tool. Looks like a handel for a single edged razor blade but instead has a very rough edge to it. Diamond or graphite I think. Or I would get a flooring chisel and use a mallet. I think you are wanting to save your old tiles or reuse them. You might not see a small flooring chisel but they do have small chisels in the same area. Get an inexpensive one if you go that way because after use it wouldn't be worth saving or sharpening. Just tap it ac cross using a mallet, or a hammer, or a high heeled shoe.(just kidding about the shoe) Good Luck
- Q:Or must I use Duraroc board or a similar item.Also can I use a ceramic wall tile on the floor ? I know they are of different thicknesses but would the wall tile hold up on a floor? Thanks for all the help.
- You say it's for the 40's is the tile plastic?, if so get a wide 3-4'' metal scraper and pop all the tile off the first one may need a little elbow grease but once you get the first one the rest goes easily. The glue will still be on the wall so invest in a good heat gun and heat and scrape all the glue off the walls. These walls should be plaster so you shouldn't have a problem. What ever is left on the walls can be lightly sanded til smooth, wash walls, prime and paint. It will take some time but the end result is worth it. I did this in a 50's kitchen and bathroom, the tile in the tub was even on the ceiling. Good luck! If the tile is ceramic its a whole other story and project. Painting than would be advisable because you would ruin most of the walls removing ceramic tiles.
- Q:I have some cracked squares in my kitchen.It is caused from the subfloor coming up in one section.What is the best way to remove old tiles and screw floor back down to and replace with extras that I have.I have the glue left over also to use on them.I know my husband had hard time getting them up once before.Tired of waiting for hubby to do it.Any easy ways for me to get tile up.
- if it's self stick try using a hair dryer to warm the tile up and get a scraper under a corner and pull up . if you glued it just grab a stong scraper and go to town .i don't think there is an easy way
1. Manufacturer Overview |
|
|---|---|
| Location | |
| Year Established | |
| Annual Output Value | |
| Main Markets | |
| Company Certifications | |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | |
| Export Percentage | |
| No.of Employees in Trade Department | |
| Language Spoken: | |
| b)Factory Information | |
| Factory Size: | |
| No. of Production Lines | |
| Contract Manufacturing | |
| Product Price Range | |
Send your message to us
Polished Porcelain Tile Single Loading Medium Black Color 6501
- Ref Price:
-
- Loading Port:
- Guangzhou
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1382.4
- Supply Capability:
- 10000 m²/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Hot Searches
Related keywords
