Polished Porcelain Tile Limestone Color LS6001/6002
- Ref Price:
-
- Loading Port:
- China main port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1267.2
- Supply Capability:
- 100000 m²/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Product Brief Introduction
Polished Porcelain Tile Limestone Color LS6001/6002 is one of the most popular color of Limestone Serie, which is one serie of Polished Porcelain Tile in the present market. Just like other series, it could be used for interior floor for apartment, villa, super market as well as other public areas, due to its being high glossy and clean, homogeneous color shade as well as the reasonable price compared with natural stones.
Whole set polished tile and glazed ceramic products archaize brick both advantages in one, not only glaze as smooth as polished tile brightening, like archaize brick pattern of design and color is rich, thick gorgeous color, natural texture, and the environmental protection and energy saving, service life long advantages and the low barriers to entry.
Product Features
Polished Porcelain Tile, Double Loading
Only Grade AAA available
Strict control on color shade, deformation, anti-pollution, surface glossy degree as well as packing
Competitive price
Product Specification
Water Absorption Rate: 《0.5%
Breaking Strength: 》 1800 N
Rupture Modulus: 》40 MPa
Length and Width Tolerance: ±0.1%
Surface Smoothness: ±0.15%
Edge Straightness: ±0.15%
Wearing Strength: 《1600 mm3
Glossiness: 》 85 Degree
Resistance to Chemical: Class UA
Resistance to Staining: Class 3.
Packing Information (For 27.5 Tons heavy 20’Fcl)
For 600x600mm, 4pcs/Ctn, 40 Ctns/Pallet, 960 Ctns/20’Fcl, 1382.4m2/20’Fcl
Production Line & Package
FAQ
1. For Polished Porcelain Tile, is the 30*60 available?
—— Yes, 30*60 is available. Due to the basic size is 60*60, we need to cut 60*60 tile into 30*60. 6 pcs are packed into one carton.
2. What is the MOQ for this tile?
—— Normally the MOQ is 1382.4 m2 for one 20’ container. To support our clients, we could go with 3 models to fill one container at most.
3. Can we use the carton with our own design and brand name?
—— Yes. Normally we go with Neutral Carton or our Carton with our CMAX brand name. But for carton of client’s own design, the MOQ for one size is 5 containers, due to the carton factory can’t arrange production if quantity is below 5000 pcs.
Our Service:
• Your inquiry related to our product & price will be replied within 24hours.
• Well-trained & experienced staff are to answer all your inquiries professional in English.
• Working time: 24 hours on line
• OEM is highly welcomed.
• Your business relationship with us will be confidential to any third party.
• Good after-sale service offered, please get back if you got question.
Suggestion:
Please kindly check the packages after you receive the goods, if you got wrong products/ quality problem/ short q'ty, please
get back to us as priority. Please note that you need to send us pictures of the defective items concerning this, and we will
consider to replace or refund accordingly.
- Q: We are planning small home improvements during the next year to prepare our house for sale. I would like to switch out our 4 year old formica countertop and replace it with granite tile. A slab is out of the question due to cost. We have a small kitchen and would need about 40 tiles. When I looked on the internet for costs, it seems I can get these tiles for under $300.00? Does that sound right, I think that‘s less than what we paid for the Formica. Also, my next question is can you use the same tile for the entryway, which is next to the kitchen, or it that a little too much of the same thing?
- The tile will be cheaper, using a slab is always more expensive. Remember that the tile doesn't include the installation cost either. You can use it in the entryway just remember that granite is very slippery when used as flooring and caution must be taken. To get the best look out of granite tile for the countertop ensure that they are laid with very little grout space. Ensure you hire a good experienced tile setter one that has laid granite tile. You want them to ensure that the edges all have the finished edge. This will give you the best look, it's really not a big deal for an experienced installer. Don't use a wood edge and go for the tile, it will last longer and increase the value of your home more than formica. You can often find bullnose edge pieces to lay with your tile unless you are buying a rare granite.
- Q: I am ready to tile a kitchen island, it has the rough shape of HOME PLATE, though not pointy. What is the best way to cover those odds angles effectively? Should I butt two edge tiles together? Also, I am not fond of the 16th inch spacing in tiles, I prefer 1/4 in gaps...any issues for the top of counter. The sides will be 1/8th gap.AdamDeridder,La
- Thousands of sq. ft. of tile. Certainly an Angle grinder with a diamond wheel can give you the cuts and angels that might work in as close as the rest of the perimeter tiles. A decent grit grind wheel can be used carefully to round off. In some measure your success will depend on the type of tile. Ceramic is as stable as Porcelain, but the glaze is millimeters thick only. I haven't spaced at 1/16th ever. It isn't enough space for grout to ahdhere well enough. 1/8th or 1/4 is standard, and sanded grout, polymer based. Steven Wolf
- Q: but now we have decided to probably go with laminate tile in each. Mainly time is the big thing, I know I can put that in but not sure about tile. Anyways is this a good decision. Does anyone have experience with laminate tile and if so can you recommend where or what brand to look at. Also can you give me an idea of pricing..Thanks...
- Are you talking about vinyl squares or Laminate flooring that snaps together? It makes a big difference. If it is vinyl squares Home Depot does have a huge selection, but it will look cheap and that stuff does not stick very well for long term in a very wet area. If it is laminate flooring it will look nicer and will hold up to the moisture better. You will need to caulk the perimeter with silicone. (water on top is o.k. water under the floor and its all over very quickly.) Hope this helps
- Q: What procedure to use to keep the tiles from falling from the ceiling before the mortar dries.
- cut kickers, or braces, to hold them. i.e. 1x2 pine sticks are sufficient. cut to estimated lenght, usually 1/8 to 1/2 inch longer. counter tops, and solid step benchs help limit material used in this way. also once placed, kickers can be shared, by placing at edges of tile to hold two to four (corners) at once.
- Q: I have large granite tiles on my counter that don't go all the way to the edge. Ceramic ones complete the lip. Unfortunately, to get my old dishwasher out from under the counter I had to break some. How do I remove what's left of them without damaging the really nice granite ones? Is there anything else I need to be careful about?
- The force from removing the broken tile can be transferred through the grout onto the granite tile. So first try to clear out the grout between the 2 rows of tile. Use a hammer and chisel (and safety glasses) and swing away from the tile you want to keep. If there is a mud job with thinset between the mud and the tile, try to chisel the thinset off, leaving the bottom mud-job in tact. If you're lucky, you won't have to repair it and can start laying the new tile right away.
- Q: The tile of my garage is 10 years old. The house was abandoned and I bought it. The tile that was used was a textured ceramic tile. I‘ve tried brushing it and washing it with different products but it goes back to a dusty look. Any ideas on how to bring it back to life other than paying to get it polished by a professional. Thank you in advanced.
- If you don't want to pay for the labor to have it cleaned, you will be the one to do it yourself. Elbo Grease. Get some Tile Acid Cleaner from the Home dpot/Lowes, and a couple of hand held scrub brushes, some plastic bristles, some metal bristles, (to see which works best). Get a spray bottle, poor the acid into it. do not delut with water. Not until after it has sat on it for 5 min and you have scrubbed and scrubbed. Then spray with water (lightly Misting) and wipe up with disposable towels. Dont forget the rubber gloves. After the entire floor is finished or until you are satisfied (or if you want to do in Stages) wait until entirely dry and get some Tile Sealer and begin to apply. Pay attention to the grout lines first then mop all over the tile. The cost for materials will be about $50--$70 But the labor is where the real money is. Have Fun I do not envy you.
- Q: I was watching HGTV and they had this tile that was flexible. It looked like alot of small square tile mounted to a flexible backing. Does anyone know the name of these? Thanks
- It IS mosaic tile. The reason it was flexible is that it was not set into a cement type substance on the wall. When it's installed it is no longer flexible
- Q: Cleaning tiles is a lot of work because they attract mildew, soap scum, etc. Now that the cleaning and scrubbing is done, what‘s next? What‘s an easy and environment-friendly way to maintain tiles? Also, if you have a suggestion for keeping a bathtub clean, that would be appreciated as well. Thanks!
- Always wipe off excess water after you bathe or shower. You can use a wash cloth and wipe off the water from the tiles. Buy a spray bottle and fill 90% water, 10% vinegar. Spray all the tiles in the shower/bath area with the water/vinegar once a week and let dry. The vinegar will not harm the grout or tiles and will eliminate mildew from growing. Bleach would be good for cleaning the tub but its not environmentally friendly. Try water/vinegar and steel wool to get the stains out. Then once a week water/vinegar and wipe clean.
- Q: Over time the tiles in my apartment bathtub have turned yellow. It‘s not all of the tiles, just a few in the back/corner. I undoubtedly have hard water but I can‘t figure out why a few of these tiles are yellow. As far as I can tell, these are cheap plastic tiles (white). I have tried comet (with bleach), full strength bleach, vinegar/water solution, vinegar/baking soda, baking soda by itself, mr. clean magic eraser, and full strength CLR to no avail. The only thing that worked at all was using comet and scouring the tiles with steel wool. Although it scratched the surface, the actual scratch part wasn‘t noticeable. But there has to be an easier way than breaking my arm to get one tile cleaned. Any suggestions? If anyone wants I can email them a picture of the tiles.
- try using Zud cleaner. found in Home Depot.
- Q: Have a tiled half wall that I dont like, and as I neither know how to remove tiles or if how to drill through a tile can anyone help?
- A bit for drilling concrete works well , also they make a spade bit that can be used for tile or glass, If it is a thick tile i would use a bit and a drill with the sds chuck as it won't slip. You can get the bits at Home Depot of just about any hardware/lumber supply store. the drill with the sds chuck can be rented if you do not have one.this is if you are trying to anchor something into the tiled wall. If you want to remove the tile, you are better to pull the tile and drywall off at the same time , if you try removing the tile alone it will damage the drywall and you'll have to float the whole thing or remove it anyway. Good Luck !
Send your message to us
Polished Porcelain Tile Limestone Color LS6001/6002
- Ref Price:
-
- Loading Port:
- China main port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1267.2
- Supply Capability:
- 100000 m²/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
