Network Raised Floor(Bare Panel) with good quality
- Ref Price:
-
- Loading Port:
- Guangzhou
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 5000 m²
- Supply Capability:
- 50000 m²/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Network Raised Floor(Bare Panel)
Dimension: 500×500×28(mm)
Products Shape / Variations
Panel Type | OA500S | OA500C |
Product shape | | |
TYPE | Concentrated Load | Impact Load | Ultimated Load | Uniform Load | Rolling Load | |||
LB | N | KG | N | N | N/㎡ | 10passes | 10000passes | |
OA500S-Q | ≥800 | 3550 | 363 | 670 | ≥9400 | ≥14680 | 3560 | 2670 |
OA500S-B | ≥1000 | 4450 | 453 | 670 | ≥11970 | ≥16900 | 4450 | 3560 |
A four-square independently supports the structure. The upper board is made
from extra-hard steel board, and the lower board has been pulled deeply. The
flooring surface is processed with anti-static coating, and the inside is filled
with foamed cement. Zinc plating is used for the base support, and the height can
be adjusted and locks automatically. The rounds of the floor have cut-line and rivet
joints to make the shape.
OA Steel Panel is composed of whole-steel flooring, whole-steel support,
anti-static carpeting and other finishes. This high-intensity flooring has a high
load capacity and is fire, moisture, and static-proof.
Features:
1) Long use life, compact size, easy to change and maintain, flexible, reusable
2) Easy to install
3) Whole-steel construction, impact-resistant, scuff-resistant, corrosion-proof
4) High regulating range of 35 ~ 150mm
5) Comfortable to walk on, appealing to look at
6) Abundant space for wiring
7) Suitable for top-grade office buildings, computer labs, classrooms,
network rooms, and other areas that require comprehensive wiring
Pedestal
Cross Head Pedestal Border Pedestal
- Q:What is the overhead floor
- There is room below the floor. Such as the floor of the stage, keel floor.
- Q:What is the effect of static electricity on electronic components?
- Electronic components in the actual use, always produce a certain amount of static electricity, which led to a series of problems. Therefore, how to effectively prevent the generation of electronic components static electricity has become one of the hot spots in the field of electronic information industry. In this paper, the principle of static electricity is analyzed, and the harm of static electricity to electronic components is discussed. Finally, the protection measures of electrostatic protection of electronic components are put forward....
- Q:Why is the weak anti-static floor, which is the specification?
- 1) Since it is weak, certainly need to prevent current interference
- Q:The ground to do anti-static dust, painted with epoxy paint, or with anti-static floor paste? That is affordable
- Of course it is good to put the floor.
- Q:Do you need to set up a static floor for a weak building in a commercial building?
- Yes, the weak electrical room and the control room in accordance with the norms must be anti-static floor
- Q:Machine room length 7.6m, width 5.3m, about 40 square meters, the existing grounding copper belt 100m, specifications 3X30MM, insulated helium for the reclamation of the old rush to protect the child 10cm / sets, 100 sets, tin plating busbar 8 * 100 * 400mm, 1 set, lightning down ground, specifications 50mm2,1m, ground terminal, specifications 4 * 40 * 400 + 2000mm flat steel, 1 item. Room electrostatic floor there are others to do we only mine, I would like to ask 1, the room needs to be connected to the number of copper meters? 2, the above products how to do lightning protection grounding specific steps and what to pay attention to. 3, horizontal ground and electrostatic floor between the height of 15cm enough? (Between the ground and the electrostatic floor has a 10cm high trough) is best to give a set of programs, to help me solve the problem to the 100 Thank you more
- Weak mine grounding: copper belt laying method There are several cases, 1, if the whole shop is 600 * 600 grid, 40 square will be 140 meters, so the cost is too high, the general project will not do so. 2, you can use the copper machine around the room is about 26 meters, the middle of a thin copper foil instead of doing electrostatic copper network, so a lot of low cost, but also in accordance with the norms to do this is more commonly used method. 3, can also be made "day" field head, so you can save a lot of material costs. Copper tape laying in the vicinity of the electrostatic floor bracket, copper belt and bracket, equipment to make a good connection between. These methods are useful to the project, the specific use of which method, this should be based on the design side or your material engineering offer. Insulators are mainly fixed, insulated copper role, the cost is cheaper. Horizontal ground and electrostatic floor between the helium for the reclamation of the old rush 15cm height enough. The main role of the busbar is to connect all the equipment ground, copper, pooled on the busbar, and then connected to 50 square bus, bus can be connected to the building public ground, the specific needs of how many meters, this should be based on distance. Probably this way. I hope I can help you
- Q:What kind of chair will not damage the anti-static floor
- Below with wheels ,so cool.
- Q:Is the insulation floor and the anti - static floor the same thing?
- Anti-static floor is insulated floor, insulated floor is not necessarily anti-static. If you have more questions, you can click on ID consultation.
- Q:To the customer made a conference system, including the LCD splicing screen and sound system, due to the sake of the carpet electrostatic extravagance of the United States and the United States and the United States, the United States and the United States, , The equipment on the cabinet, including the mixer, amplifier, timing power, wireless microphone receiver. Do not know how to ground to eliminate static electricity, is the equipment alone or to the cabinet grounding on the line? Gooseneck microphone how to ground? How are these devices connected to the ground? What materials do you need? Trouble you to the article Ming Road, brother do not understand, first thanked in the past. More
- To the customer made a conference system, including the LCD splicing screen and sound system, due to the sake of the carpet electrostatic extravagance of the United States and the United States and the United States, the United States and the United States, , The equipment on the cabinet, including the mixer, amplifier, timing power, wireless microphone receiver. Do not know how to ground to eliminate static electricity, is the equipment alone or to the cabinet grounding on the line? Gooseneck microphone how to ground? How are these devices connected to the ground? What materials do you need? Trouble you to the article Ming Road, brother do not understand, first thanked in the past. More
- Q:Anti - static floor acceptance criteria
- Antistatic active floor general specification (SJ / T-2001) which details how to test and methods. The The Please refer to the standard. The The
1. Manufacturer Overview |
|
|---|---|
| Location | |
| Year Established | |
| Annual Output Value | |
| Main Markets | |
| Company Certifications | |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | |
| Export Percentage | |
| No.of Employees in Trade Department | |
| Language Spoken: | |
| b)Factory Information | |
| Factory Size: | |
| No. of Production Lines | |
| Contract Manufacturing | |
| Product Price Range | |
Send your message to us
Network Raised Floor(Bare Panel) with good quality
- Ref Price:
-
- Loading Port:
- Guangzhou
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 5000 m²
- Supply Capability:
- 50000 m²/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Hot Searches
Related keywords
