Mobile Tower Crane TC 5511 for Construction
- Ref Price:
-
- Loading Port:
- China main port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 set
- Supply Capability:
- 20 set/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Description of our Tower Crane
1, TC4808 have competitive price and excellent quality, suitable for all kinds of construction project and can work under all kinds of work condition. With their working radius from 2.25 to 48m, TC4808 tower cranes are famous for their large operating ranges, varied working methods and wide uses.
2,This series of tower cranes has a horizontal jib frame, a jib-trolley radius-changing mechanism and a hydraulic self-raising mechanism.
3, It is original in design, reliable in operation and satisfactory in shape.
4,Equipped with all necessary safety devices, these cranes show a good speed-control capacity,, satisfactory operating stability and high work efficiency.
5,They are widely applied for the construction of high-rise hotels, resident buildings, high-rise industrial buildings, large-span factory buildings and tower like buildings like tall chimneys. Best after sales service will be offered which will get rid of all your worries in the purchase of our products
Advantage of our tower crane
1, boom relief Angle is big, greatly widened the equipment capacity and scope of work.
2, suitable for the group of tower cross homework.
3, boom stability is good, combination amplitude range.
4, suitable for height have special requirements occasions construction.
5, lifting capacity big, effectively solve the high steel structure construction team crane big lifting capacity requirements.
Specification of Tower Crane
Model | QTP80 (TC5511) (Flat-Top) |
Max Working Radius (m) | 55 |
Free Height (m) | 41 |
Max Load (T) | 6 |
Tip Load (T) | 1.1 |
Max Height (m) | 161 |
Wall Ties for Max Height (sets) | 8 |
Main Material Specs (mm) | Square Steel Tube 1352*12 |
Mast Section Dimension (m) | 1.835*1.835*2.5 |
Hoisting Speed (m/min) | 80/40/10 |
Min Steady Falling Speed (m/min) | 5 |
Slewing Speed (r/min) | 0-0.62 |
Radius-changing Speed (m/min) | 40/20 |
Jacking-up Speed (m/min) | 0.6 |
Total Motor Power (kw) | 60 |
Independent Structure Weight (kg) | 37800 |
Counter Weight (T) | 16.2 |
- Q: Tower crane 10-5-20 is 6T, and 10-5-21 is 8T. What do you mean by tons?
- 6T/8T refers to the maximum lifting capacity of a tower crane. It doesn't matter what 10-5-20 has to do with it. Maybe your list of numbers is serial number.
- Q: or is jason mraz just making up things for lyrics?
- No. They are lifted into place in sections by one or more other cranes, the telescopic arm kind, which are either in a nearby street or on the building site. I watched several being built and then dismantled over a period of three years at a large development across the street from my house. However, I saw a TV programme about how they built one on top of a mountain, and there they used helicopters to lower the sections into place.
- Q: If so, would you mind finding me a site that will teach me how to either with a good video or an easy-to-follow explanation because i tried many sites and i just cannot understand clearly enough. I get so far and then i can't tell what is happening in a step, and i can't do it.If you wouldn't mind to find me a site that you know will help, since you can make them, it would be greatly appreciated.Thanks.
- this okorder
- Q: as the crane cabin temprature is very high which is not good for equipment pls advise which air condition is good for colling
- I would use a roof mounted unit. They are commonly used in campers. 10,000 btu should be ample.
- Q: Hi, I just bought a 12 foot tommy jib crane, for my cannon x1-h1, I also bought a pan and tilt motor that you put on top of the camera mount at the end of the jib and then add your camera on top of your motor mount. This thing is really heavy now, I have to use 40 lbs for a counter weight. On top of that all the weight is making the jib slanted and shooting crooked. So I took off the motor head and just left the camera on there, and it help a bit, but its still crooked. Is there any fix for this other than buying a more expensive stronger jib crane? It shoots great and I know I can fix the video in post, but it just bothers me. Any help?
- You have twisted Jib. You could get a helper or friend or two and see if you can bend it back. That's what you get for not reading the manual and seeing what the gross weight you could support with this Jib. If you are not comfortable trying to bend it back, leave it and operate with a bent jib. If you want to support that combination, you are going to need to know the weight of the Camera and motor system so you can get a Jib that can handle that weight.
- Q: What does "automatic tower crane" mean less than 100 tons per metre?
- The crane must not exceed the maximum lifting capacity when working! Otherwise, there will be danger.
- Q: my overhead crane refuse to work transvesely
- Limit switch replacement requires adjustment of the cranes travel limits. The limits are imposed by the manufacturer for the application. This service is normally factory authorized only.
- Q: how to make a magnetic crane on cheap price?
- The whole crane or just the lifting device? Not easy to be cheap in either case - the crane because of safety concerns and the lifting head because it requires a lot of now high priced copper wire, well insulated, and a hefty electrical source with long cables to get the power to the head. Best (probably) to buy used if you want to save money.
- Q: Vtwin doc helped me out with this dam thing recently Im thinking he has the 411! So here goes: My friends coil went bad and we used a single fire coil on a dual fire ignition. V twin doc showed me how to do that. But it still doesnt quite run proper. So here are the settings:Its set at 5900 R.P.M. limit,with advance slope at 9.the rear cylinder is set at 0.Its set on dual fire,its set on electric start.and its set on multi spark not single.Its a crane fireball hi 4e model 8-3100. It cranks for a bit before starting and runs a little rough at low R.P.M. ran just fine with the stock coil.
- I don't know how much this is gonna help, but on my Ironhead I use a 8-2100, set at 1degree BTDC, and rear at 2 BTDC and electric start in race mode. Now I have aggressive cams and I don't know how it's supposed to be for a stock single stick.
- Q: What are the common problems encountered in hiring cranes for house constructions?
- Access, I assume you need a Franna. Possibly for frames and or trusses to the second level or steel beams. You will be limited by reach if the crane can only access the front of the house. In which case you may need a slew crane 30t or larger. Know the weights of what has to be lifted and the distance from the crane to where it will be placed. A crane cannot set up or travel over underground services or recently filled excavation. These things could mean the crane has to set up even further away from the house. If the crane is for unloading trucks, access again. Cranes need to stay about 3meters from power lines which is a common problem bringing gear onto site. While a slew crane generally sets up in one position for all lifts (some can travel) a Franna is designed specifically for pick and carry. It can unload trucks and travel the gear onto site under the power lines. Provided it isn't lifting extra large items. Speak with the provider about what has to be done, it will be all to familiar for any decent company. As long as access is fine and underground services won't hinder you they should know exactly what you need. Be prepared, usually a minimum 4hr hire. If you think the task is going to take longer you need to plan what has to be done and have everything ready for placement. Organization is paramount, you don't want a crane and it's crew sitting there doing nothing because you didn't plan ahead. Hope this helps, I could have been more specific if the question had some details.
Send your message to us
Mobile Tower Crane TC 5511 for Construction
- Ref Price:
-
- Loading Port:
- China main port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 set
- Supply Capability:
- 20 set/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
