High Performance Ceramic Filter Plate - Manufacturer
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 0 pc
- Supply Capability:
- 100000 pc/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Specifications
Silicon Carbide Ceramic Foam Filter work at more than 1500 Degree Celsius, filter moten iron and copper in related casting.
Silicon Carbide Ceramic Foam Filter
Ceramic Foam Filter is the third generation filter, compared with traditional filtering materials(ceramic honeycomb filter, extruded filter), our Ceramic Foam Filter have the advantages as below:
1. High thermal stability, stable chemical composition in high temperature,avoid the chemical reaction with the filtered molten metal.
2. High mechanical strength, large specific surface,efficient in purifying the metal flow.
3. Lower the filtering head loss,easy-operating,save energy. Smooth the metal flow,avoid the spray, spatter and backset,improve the exterior quality of the casting product,prevent the pore disfigurement,reduce the inferior rate.
4. Various size, shape and aperture,suitable for kinds of casting technique.
The Ceramic Foam Filter are widely used in non-ferrous metal smelt, Foundry Industrial of Copper, Aluminum Alloy, Cast Iron, Cast Steel and high temperature fume separator, special filling. silicon carbide ceramic foam filter been used to filter molten iron and copper liquid in the iron casting industry, improve the casting product quality highly.
- Q: The ultrasonic wave of ceramic filter is not good. What's going on?
- The earliest filtration was mostly gravity filtration, which was followed by pressure filtration to increase the rate of filtration, followed by vacuum filtration. The drum vacuum filter invented in the early twentieth Century realized the continuous operation of the filter. Since then, various types of continuous filters have appeared. Intermittent operating filters (such as plate and frame press filters) are developed for automatic operation, and the filtration area is becoming larger and larger. In order to obtain the filter residue with low moisture content, the mechanical press filter has been developed.
- Q: Why should filter core be used in backwash of ceramic filter?
- Ceramic filter recoil stage is with certain pressure of clean water from the inside out washing ceramic filter plate, the outer aperture ceramic filter plate from inside is gradually reduced, such as flushing water and unclean inside contain impurities that may block ceramic filter board, other structures in the recoil stage of pollution. Such as recoil, water is not clean, you must go through the water filter cartridge to filter again, the choice of filter core, the higher the accuracy of filtration, the more clean water, but the filter is more likely to plug, scrap. Of course, the water is clean and contains little solids. The filter core is not easy to plug and even water filters can be removed.
- Q: Why does not the iron filter of the ceramic filter work?
- The ore condition has changed, such as high concentration of material, fine grain size and increase of mud content.
- Q: Common troubles of ceramic filter
- (1) low vacuum, can not meet the production requirements. The main reason is the vacuum pipeline leakage, vacuum pump circulating water is not enough, vacuum pump impeller wear and tear, distribution head wear, ceramic filter plate damage, filtrate tank drainage valve is not closed, pulp trough material level is lower;(2) low or fluctuating backwash water pressure. The main reason is the blockage or leakage of the backwash water pipe system and the distribution of head wear;(3) the liquid level of the filtrate tank is high. The main reason is that the circulating water pump impeller or pump shell wear, pressure is insufficient, so that the drain valve can not open or drain valve itself failure, and filter barrels and circulating water pipe between the leakage;
- Q: How much is the accuracy of 50nm ceramic membrane filtration?
- 50nm refers to the nominal pore size, but it does not mean that the holes in the ceramic membrane are 50nm, but the approximate number of holes. The size of the pores may be between 40~60 and 45 to 55nm. Generally introduced, annotated range, you can also own to detect.
- Q: Ceramic filter capacity.
- You ask too general, to say processing capacity (ie capacity), at least to provide material conditions, such as: material name, concentration, particle size distribution. In addition, the basic conditions of equipment operation should be taken into account.
- Q: Excuse me, what's the reason that all ceramic filters do not attract ore?
- Whether the ore conditions are changed, such as pulp type, mud content, fineness, concentration, etc..
- Q: What's the acid of the ceramic filter plate?
- General ceramic filter running for eight hours or so, you need to stop for joint cleaning, general cleaning at an hour or so. When washing together, there is acid washing, usually concentrated nitric acid. The purpose is to dissolve the pores in the ceramic filter plate through nitric acid.
- Q: The vacuum of ceramic filter is not enough
- Maybe the vacuum meter is broken. It doesn't show or show the data is different from the actual data.It could be the source of the vacuum, the vacuum pump failure.Pipeline leakage: vacuum system connecting pipes (metal pipes or rubber pipes) corrosion, aging and water leakage.Distributor head leakage: wear or poor sealing.Leakage of ceramic plate: rupture of ceramic plate.Other reasons.
- Q: What are the functions of honeycomb ceramic filters?
- At present, it is widely used in metallurgy, foundry industry, metal melt filtration, using mullite (cordierite) ceramic materials
Send your message to us
High Performance Ceramic Filter Plate - Manufacturer
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 0 pc
- Supply Capability:
- 100000 pc/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
