Graphite Bar Mold for Zinc Casting
- Loading Port:
- China Main Port
- Payment Terms:
- TT or LC
- Min Order Qty:
- 100 Pieces pc
- Supply Capability:
- 10,000 Pieces per Month pc/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Quick Details
- Application: Casting
- Dimensions: different specification
- Chemical Composition: Carbon
- Composition: high purity carbon
Specifications
Casting Mould1high pure and density
2mould for casting industry
3high strength graphite
4long using life
Graphite Mould
Feature:
1. Thermal stability: According to the quench acute thermal using conditions of graphite crucible, we will specially design the production procedure, so as to ensure the reliability of product quality.
2. Corrosion resistance: Even and fine basic design will delay the erosion of crucible.
3. Impact resistance: Graphite crucible can bear high thermal impact, so any process can be carried out.
4. Acid resistance: The adding of special materials will greatly improve the quality of crucible, especially its index of acid resistance., and will prolong the service life of graphite crucible.
5. High heat Conduction: High content of fixed carbon ensures the good heat conduction, shorten the time of dissolution, and remarkably reduce the energy consumption.
6. Control of metal pollution: The component of material under strict control will ensure that graphite crucible will not pollute the metals when dissolving.
7. Quality stability: The process technology of forming under high pressure and quality guarantee system will fully ensure the stability of quality
Graphite molds Materials index:
1.Content: 99.99%
2.Density: 1.87g/cm³
3.Compressive strength: 65mPa
4.Shore hardness: 55
5.Porosity: 15%
Application:
1. Brass continuous casting mould
2. Red copper continuous casting mould
3. Continuous casting mould for jewelry of gold, silver, platinum, etc.
4. Steel and stainless steel continuous casting mould.
By the shape of the cast product, it is divided into round bar mould, hollow tube mould, and shaped mould.
- Q: What are the electrodes on the die?
- Some shapes of electrodes cannot be made of copper, but graphite is easier to shape. Copper electrode is heavier (graphite, 1/5 of copper), which is not suitable for processing large electrode, which is also one of the reasons for using graphite electrode. The mold factory, from copper electrodes to graphite electrodes, needs to understand how to use graphite materials and consider many other factors. Graphite is divided into different grades and the ideal results can be achieved by using proper grade graphite and machine parameters in special applications. For example, the machine operators using graphite electrodes use the same settings as the copper electrodes, and the results are disappointing.
- Q: How can the die steel be sharpened?
- Also can be used for plastic, nylon, or iron material, because the material used? If the roughness of the alloy knife is not good, white steel can get higher roughness, but it must be fine car, processing capacity of 0.3 to 0.8, if the processing of large amount of coolant must be added. A small amount of 45 steel can also be done.
- Q: How oil impregnated graphite mould
- In order to achieve a good soak, soak for at least two days more than two days in advance is ready
- Q: I do stretch die for nodular cast iron, which can tell me the mold heat treatment method, the specific Cui fire a few degrees?
- annealingThe casting stress of the stress relief cast iron is about two times greater than that of the gray iron. For ductile iron castings which are no longer subjected to other heat treatment, stress relieving annealing shall be carried out.
- Q: How many times can a graphite hot bending die be used at most?
- The material of graphite hot bending die is different, the service life is different. Mainly the density, ash, the impact of their own material.
- Q: How do graphite blocks do mirror treatment?
- Then polished diamond paste (grain size W5) polished, and finally use (W3.5) of diamond polishing paste polished to the mirror surface.
- Q: How are graphite molds made?
- Raw materials are crushed, mixed, molded, and graphitized
- Q: Graphite used for mold, how much is the market price of one ton?
- Mainly used for electrodes!Processing is not very convenient
- Q: Is there any refractory coating material that can be coated on the graphite mold?
- Graphite itself is resistant to heat and needs no smearing.
- Q: How to use and manufacture graphite mould in hot pressing diamond tools?
- While in hot pressing, because of the sameWhen the temperature is heated and pressed, the temperature can be sintered as long as the bonding metal reaches the plastic body, so the temperature is low and the time is short. becauseThe compressive strength of diamond decreases with the increase of sintering temperature and time.
1. Manufacturer Overview
Location | Shandong,China (Mainland) |
Year Established | 2010 |
Annual Output Value | US$2.5 Million - US$5 Million |
Main Markets | 20.00% South America 20.00% Eastern Europe 20.00% South Asia 20.00% Domestic Market |
Company Certifications |
2. Manufacturer Certificates
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability
a) Trade Capacity | |
Nearest Port | QINGDAO |
Export Percentage | 41% - 50% |
No.of Employees in Trade Department | 3-5 People |
Language Spoken: | English, Chinese |
b) Factory Information | |
Factory Size: | 5,000-10,000 square meters |
No. of Production Lines | 8 |
Contract Manufacturing | OEM Service Offered |
Product Price Range | AVERAGE |
Send your message to us
Graphite Bar Mold for Zinc Casting
- Loading Port:
- China Main Port
- Payment Terms:
- TT or LC
- Min Order Qty:
- 100 Pieces pc
- Supply Capability:
- 10,000 Pieces per Month pc/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches