GLAZED TILE CMAX-6171
- Ref Price:
-
- Loading Port:
- China Main Port
- Payment Terms:
- TT or L/C
- Min Order Qty:
- 1 x 20' FCL m²
- Supply Capability:
- 100000 M2 Per Month m²/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Description of Our Glazed Porcelain Tile :
800*800 full glazed porcelain tile
Specifications of Our Glazed Porcelain Tile:
.Absorption rate:<0.5%
.Size:800x800mm
.Grade AAA
.CE&ISO9001
Features of Our Glazed Porcelain Tile:
1.Superfine powder twice hedging penetration imitates"pearl"effects and has a kind of flowing effect.
2.The waving of tiny lines randomly spreads together with powder flowing field form natural petaline"pearl"effect.
3.Mulit-pipe ground color and multi-pipe grains combine;superfine powder multiple soft spreading creates natural piled up grains that are clear in gradation with strong 3D effects.
4.Adopts a kind of top stain-resisting technology,to form a special dense protective layer on tile surface and effectively fill the pores left after polishing and penetrate into tile body to closely integrate with tile body,thus put an end to any super stains from penetrating in.
Test Report of Our Glazed Porcelain Tile:
TEST REPORT | ||||||
Item | Inspection Item | Unit | Provision of Standard | Test Result | Judgement | |
1
| SIDE | The deviation ,in percent of the average side for each tile from the work size. | mm | ±1.0 | +1.0 | Pass |
The deviation ,in percent of the average side for each tiel from the average size of the 10 test speciment . | % | ±0.4 | +0.01 | Pass | ||
Thickness | % | ±5 | +4.21 | Pass | ||
Straightness of sides | % | ±0.2 | +0.06 | |||
Rectangularity | % | ±0.2 | +0.05 | Pass | ||
Center curvature | % | ±0.2 | +0.05 | Pass | ||
Surfaceflatness | Edge Curvature | % | ±0.2 | +0.05 | Pass | |
Warpage | % | ±0.2 | +0.08 | Pass | ||
2 | Surface quality | / | A minimum of 95% of the tiles shall be free from visible defects that could impair the appearance of a major area of tiles | Pass | Pass | |
3 | Water Absorption(E) | Average value | ≤ 0.5 | ≤ 0.3 | Pass | |
Individual value | ≤ 0.6 | ≤ 0.5 | Pass | |||
4 | Breaking strenghth | N | Thickness ≥ 7.5mm,not less than 1300N | 2187.3 | Pass | |
5 | Modulus of Rupture | Average value | Mpa | 48.1 | Pass | |
Individual value | Mpa | 46.1 | Pass | |||
6 | Thermal shock resustance | / | Test method availuble after 10 times testing | Pass | Pass | |
7 | Mark(On the package) | Manufacturer logo or/and Origin | Pass | Pass | ||
Quality mark | Pass | Pass | ||||
surfacecharacter ,GL OR UGL | Pass | Pass | ||||
8 | lra | ≤ 0.5 | Pass | Pass | ||
Application of Our Glazed Porcelain Tile:
- Q: I have never tiled before. I have a 3 x3 ft entrance in my house. I would like to remove the old tile and re tile it. How long should this take? and can I just tile over the old tile or does it have to be removed? but mostly how long should it take me to do?
- Sorry, I even have in no way heard of a spacing gadget. I in many circumstances basically use the little plastic spacers which you insert between each and each tile. I even have seen some people take an prolonged board and format marks on the board on the suitable spacing.
- Q: My house is 55 years old. They had vinyl floring in the bathroom. We wanted to replce the flooring but when we hauled up the vinyl, theres 2inch ceremic tiles underneath. I think the vinyl was glued down because the tiles are a mess. We bought some vinyl flooring to put back down. Whats the best way to do this? We were going to but 1/4 round but now the floors are tile underenath, and the walls are tile as well so we can‘t nail it in.
- Clean the tiles and make sure the surface is completely smooth, laying tile over tile is actually an ideal surface, if you're not at bare wall. Use flooring adhesive, if the tiles you bought are glueless - then use a sealer, reapply once a year or whatever the sealer recommends for reapplication. You can always tile subfloor panels and lay that directly over the tile that's already there - glue (with construction adhesive)or nail the subfloor down. But that's an extra expensive for the subflooring.
- Q: I‘m tiling my bathroom shower and need to cut holes for the shower head and body sprayers. I‘m using porcelain tile and I‘m not having any luck cutting the holes. I‘ve bought a couple holes saw bits that say they are for porcelain, but they just don‘t seem to be doing the job. Any assistance would be greatly appreciated.
- I cut ,and you can too, all my porcelains and ceramic tile w/ a wet saw. I mark front and back w/ a permanent marker. I mark a 1 to a 1/1/4 hole . I make a square . Front of the tile I just score it good w/ a wet saw. In this case the smaller the blade the better. Then I flip the tile over and hold the tile w/ my arm w/ my fingers over the scored front holes. Then I plunge cut each side of the hole carefully. Just letting the blade come thru. It won t cut your fingers .. Once you have all 4 side cut, you can tap the hole out or carefully cut it more until it falls out. They also make a small dry saw that has a 4 blade that will work, since I ve also used mine 100 s of times this way too if my wet saw wasn t set up. You must have the tile on a flat surface to do this though..Any questions you can e mail me thru my avatar and check my qualifications there GL
- Q: How many square meters of tiles (wall) (Tiles) multiple?
- How big is it? 800X800 and 600X600 are a square meter weight is not the same?
- Q: ive never tiled anything before. i was thinking of replacing our old tiles around the fireplace and puttnig in slate ones. i am wondering if its a bigger project than it seems. will i have to remove the mantle to do it. is it harder to tile something on the wall or fireplace than the floor? should i just seek a professional or is it easy?thanks
- This okorder /... Bottom line? Maybe this isn't the best project as a first project.
- Q: making a counter top from spare tile pieces
- Prep your counter to meet tile standards, Each one can be different so with out knowing what yours is I cant say there. You ll need to figure what you want to do with the edge to trim it out. You can use a tile bull nose or a wood trim. Spread the needed glue, usually a thin set , over a small area. Then you can break tiles , ( very carefully) with a hammer or a pair of tile nippers. I use tile nippers to create the piece effect. These methods are called rubble effect. You ll need a honing stone to hone the tile edges so they are not sharp. Set into the wet glue, don t let it skim over or become dry. Grout as needed depending on what type of tile you use. Any questions you can e mail me through my avatar and check my qualifications there. GL
- Q: I would like to install laminated flooring in my kitchen. Two of the wall are tiled. Is it possible to undercut these tiles or is there an easier method to do a neat installation?
- Yes, it is possible. You could use an oscillation type cutter with a carbide tip. If you do use this, use a scrap piece of the flooring as a shim to get your gap at the bottom so you can get the flooring under the tiles. then cover the gap with your trim.
- Q: I have some cracked squares in my kitchen.It is caused from the subfloor coming up in one section.What is the best way to remove old tiles and screw floor back down to and replace with extras that I have.I have the glue left over also to use on them.I know my husband had hard time getting them up once before.Tired of waiting for hubby to do it.Any easy ways for me to get tile up.
- if it's self stick try using a hair dryer to warm the tile up and get a scraper under a corner and pull up . if you glued it just grab a stong scraper and go to town .i don't think there is an easy way
- Q: Staining and grout removal aside, are there other disadvantages to using natural stone tile for bathtubs?
- Using natural stone in the bath tub is not that advisable. removal of grout and stain is not a problem if the granite is well polished you know. I want to tell about one issue only which I have seen many places. You know if you compare with ceramic tiles, the natural stone is a porous material, I mean there are many invisible holes on it. The effect is that stones will absorb water and it will spread into the foor and it wil make problem if your bath is in the first floor or above. See the problem if you are on a floor above the ground floor, you will see water dripping from the bottom area of the tub. In this case, if you are particular in going with natural stone, you can make it somewhere out side the building with separate foundation.
- Q: can you tile an old brick fireplacegt;?would it look stupid?
- Are you still planning on using the fireplace? You will need to check with the manufacturer of the tile that it can withstand the heat. If you're tiling the exterior of the fireplace, make sure you select a corner bead for the exposed edge where the fireplace opening meets the wall plane. Installing tile over a fireplace is not a big deal if you're putting it on the wall plane. Whether it looks stupid or not depends on the type of tile you use and the overall color scheme. It could definitely work.
1. Manufacturer Overview
| Location | Guangdong, China |
| Year Established | 2005 |
| Annual Output Value | Above US$ 90 Million |
| Main Markets | 8.00% Mid East 15.00% Northern Europe 15.00% North America 12.00% Eastern Asia 10.00% Africa 9.00% Eastern Europe 20.00% Southeast Asia 4.00% Oceania 3.00% Western Europe 2.00% Southern Europe Mid East; Eastern Europe; North America |
| Company Certifications | ISO 9001:2008；CCC,CE |
2. Manufacturer Certificates
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period |
3. Manufacturer Capability
| a) Trade Capacity | |
| Nearest Port | Foshan,China |
| Export Percentage | 41% - 50% |
| No.of Employees in Trade Department | 20-30 People |
| Language Spoken: | English; Chinese; Spanish |
| b) Factory Information | |
| Factory Size: | Above 100,000 square meters |
| No. of Production Lines | Above 10 |
| Contract Manufacturing | OEM Service Offered; Design Service Offered |
| Product Price Range | High; Average |
Send your message to us
GLAZED TILE CMAX-6171
- Ref Price:
-
- Loading Port:
- China Main Port
- Payment Terms:
- TT or L/C
- Min Order Qty:
- 1 x 20' FCL m²
- Supply Capability:
- 100000 M2 Per Month m²/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
