Glazed Porcelain Tile Wall Tile Series WT3060BG
- Loading Port:
- Qingdao
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1267.2
- Supply Capability:
- 100000 m²/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Product Brief Introduction
Glazed Porcelain Tile Wall Tile Series WT3060BG is one of the most popular color of Wall Tile Serie, which is one serie of Ceramic Tile in the present market. Just like other series, it could be used for interior floor for apartment, villa, super market as well as other public areas, due to its being high glossy and clean, homogeneous color shade as well as the reasonable price compared with natural stones.
Product Features
· First choice, top grade.
· Water absorption : 10%-15%.
· Delivery Time: Within 10-15days for stock, 30days for production against the down payment
· Certificate: CE, ISO9001, SGS, etc.
· Competitive price and high quality
· Strong hardness
· Size:240x660mm,250x700mm,300x300mm,300x600mm,300x900mm, 330x600mm, 400x800mm ...
Product Specification
Tile Type: Ceramic Tile
Quality standard: GB/T4100-2006, ISO13006, ISO9001
Water Absorption Rate: around 12%
Length and Width Tolerance: ±0.1%
Surface Smoothness: ±0.15%
Edge Straightness: ±0.15%
Glossiness: 》 85 Degree
Packing Information (For 27.5 Tons heavy 20’Fcl)
For 300x600mm, 4pcs/Ctn, 40 Ctns/Pallet, 960 Ctns/20’Fcl, 1382.4m2/20’Fcl
Production Line & Package
FAQ
1. What is the MOQ for this tile?
—— Normally the MOQ is 1382.4 m2 for one 20’ container. To support our clients, we could go with 3 models to fill one container at most.
2. Can we use the carton with our own design and brand name?
—— Yes. Normally we go with Neutral Carton or our Carton with our CMAX brand name. But for carton of client’s own design, the MOQ for one size is 5 containers, due to the carton factory can’t arrange production if quantity is below 5000 pcs.
3. Why choose our Floor Tile?
1). Less investment and shorter lead time because we ship tiles directly from Factory.
2). Better ETD and more stable price bacause we keep abundant stock for future needs.
3). Experienced service because we have an experienced team and we could send our experienced engineer for guving useful instruction on your jobsite.
- Q: I thought that bathroom floor tiles were thicker than the bathroom wall tiles, is this right?
- In some cases, the real difference is: floor tiles are stronger. You don't have to walk on walls, you walk on the floor, they are usually much stronger.
- Q: I am looking at removing the existing wooden fire place surround (not a mantel, but some decorative wood surrounding the fireplace), and the 70‘s fireplace hearth, and replacing each with some nice slate tiles. The slate would be attached to the wall, and to the floor. Is there anything I should know when attaching (slate) tiles to a wall? Do I need to remove any paint, or can I get an adhesive that will bond (PL Premium or regular mortar mix?). How close should the grout lines be with slate? I know with marble you want them close, and with ceramic you can have some space. How do you ensure the tiles don‘t slip when attached to a vertical wall. Sorry for the questions, but I do appreciate any suggestions and answers!
- Only loose paint needs to be removed. If your paint has no chips or bubbles there's no reason to try taking it off. Your grout lines can be from 1/8 to 1/4' depending on your preference. Use a premixed ceramic wall adhesive such as Pro-Lastic, Pro-Flex, or Pro-Mastic Thinset. To keep tiles from slipping, simply start at the floor and work up, applying spacers between the tiles as you work. The adhesive will keep the tiles from falling off the wall, and the spacers and tiles below will keep them from sliding down. Some tiles come with built in plastic spacers for wall installation. It is possible for the tiles to sag a little so check with a level from time to time.
- Q: I got these tiles at a yard sale. They appear to be very old, hand painted and likely of Mexican origin. The label is tattered and faded, but I would love to know more about them. Thanks for any info in advance.
- Very nice and I am sure that once you put them up you will love the vintage old world look that they will give your room. Have fun!
- Q: Hey there. We are in the process of adding a half bath to our home. We purchased tiles months ago at a tent sale at out local tile store. We have some wall corners that might require bullnosed corner tiles but this wasnt taken into account when we purchased the tiles and now we cannot find matching bullnose tiles anywhere.......Is there any was to finish the wall edges without using bullnosed tiles and have it still look good???
- Bnose tile is a new simplified way of doing tile and was to remove one of the grout edges. So all you have to do is grout the top like they did in the old days a few years ago. You could also use a thin lat of flat trim, a brass or stainless steel edging, or caulking that matches the wall or tile. I think the simple grout is your best bet. PS. Where corners meet If the tile is same color through they can show. If it is glazed colored or just a thin color on top then no. In that case cut the tile back so that they do not quite reach the corner. Then there will be a slight inverted corner where you will grout or caulk. In neither case would you want to miter the corner. It will be too sharp and thin corners would be weak enough to chip.
- Q: we had our bathroom redone, it looks great but the guy that did it got some grout on one of the decorative tiles, where it shouldn‘t be. Is there a way to get the grout off ?
- It will depend on the skill of your personal observe. If you think it will look better you may try. After all it your house and the choice is yours. How it will look better you think and if necessary reinstall the tiles.
- Q: Do you have to rough up the old flooring ?
- I tile, every day of my life, and while I'm not at all a fan of vinyl tile, you didn't state PEEL and STICK. Obviously the adhesives on Peel and Stick are inferior and as answer 1 suggests the tile can creep on any substrate. You also don't state any texture on the current tile, certainly to float anything over it is no less a task and challenge as it would be to remove the tile. For one thing a peel and stick needs almost a glass like finish for its inferior adhesive to be even modestly effective. That would relate to roughing up as well. Then there is the issue of how you might define Rough Up? I offer my opinion/ s First of all if it's peel and stick, I'd not bother, but if I bothered, my usual; course of action is a water based contact cement on both the substrate and the bottom side of the tile. That method can be used on non adhesive backed tile as well, but there are many viable/valid tile mastics on the market. A final note, no matter what tile or method you choose. DO NOT use the existing tiles as a guide to install new. If you choose to floor over though I cannot imagine doing so, you will be better served to displace seaming the new tile, (offset) at the seams, from the existing. Steven Wolf Just my two sense
- Q: Ok.. what i mean is this. Let‘s say you have hard tile beside the toliet and water damaged occured. Once you press down on the tile you can actually feel the weakness in the tile.. Does this automatically determine bad subflooring or is it possible just bad tile, Can I just killz over the subflooring repaint and lay new tile?
- Does the tile wobble? It could mean the adhesive under the tile has deteriorated because of water leaks. Can you get under the floor and look up?
- Q: I am thinking about tiling 2 bathrooms in a rental property and planning to use 12x12 tiles costing $1 each. I want to use the same tiles for bathtub surrounds as well as floor. I am looking for some advice about the size of tiles that may be appropriate.Thanks
- If the tiles fit the area then 12x12 are fine. I used 12 tiles for my bathroom remodel and it turned out fine. You need to figure out how much cutting is involved. Get graph paper and see how it looks. Mine fit fine since it was divisable by 12.
- Q: I am about to renewing my kitche.I plan to install tile.Well I have no tile cutter but I do have a simple, regular cutt off electrical tools and a diamond blade.Should this be enough for it?
- Based okorder /
- Q: My house that we moved into has the original small tiled ugly green floor in the bathroom. I would love not having to rip it up and replace it before we sell it this spring. Is it possible to paint the tile. And if so how or where do I go to learn how to do this.Thanks.
- There okorder / it recommends not using floor tile paint in places such as bathrooms where there is moisture. I guess you could paint the floor a week or two before putting it on the market - a case of buyer beware if it all scrapes off 6 months later - but the paint is quite expensive so I wouldn't personally go down this route myself - as it's not a nice thing to happen for the unsuspecting buyers. I'm guessing that currently the floor is more of an eyesore as you haven't integrated this into your current bathroom design? Personally, I would ditch the painting idea and buy a decent off-cut of lino and cover up the old floor tiles since you only have a small area to work with. Lino nowadays comes in many guises/patterns and since it's a small area you can check all local companies for offcuts of perhaps the more expensive pseudo 'wood' type lino etc... You may spend ?50 but it will brighten the room and transform it into a more modern look - and ultimately will help you get your asking price. (You could also tell the buyers that the original green tiles are still underneath and they could reveal them if they wanted to...just don't tell them how ugly they are...the secret is to get them excited about new possibilities in the future!!) LOL Fingers crossed that your house sells quickly in the Spring. xx
Send your message to us
Glazed Porcelain Tile Wall Tile Series WT3060BG
- Loading Port:
- Qingdao
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1267.2
- Supply Capability:
- 100000 m²/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords