Glazed Porcelain Tile CMAX-HB01
- Ref Price:
-
- Loading Port:
- China Main Port
- Payment Terms:
- TT or L/C
- Min Order Qty:
- 1 x 20' FCL m²
- Supply Capability:
- 100000 M2 Per Month m²/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Description of Our Glazed Porcelain Tile :
800*800 full glazed porcelain tile
Specifications of Our Glazed Porcelain Tile:
.Absorption rate:<0.5%
.Size:800x800mm
.Grade AAA
.CE&ISO9001
Features of Our Glazed Porcelain Tile:
1.Superfine powder twice hedging penetration imitates"pearl"effects and has a kind of flowing effect.
2.The waving of tiny lines randomly spreads together with powder flowing field form natural petaline"pearl"effect.
3.Mulit-pipe ground color and multi-pipe grains combine;superfine powder multiple soft spreading creates natural piled up grains that are clear in gradation with strong 3D effects.
4.Adopts a kind of top stain-resisting technology,to form a special dense protective layer on tile surface and effectively fill the pores left after polishing and penetrate into tile body to closely integrate with tile body,thus put an end to any super stains from penetrating in.
Test Report of Our Glazed Porcelain Tile:
TEST REPORT | ||||||
Item | Inspection Item | Unit | Provision of Standard | Test Result | Judgement | |
1
| SIDE | The deviation ,in percent of the average side for each tile from the work size. | mm | ±1.0 | +1.0 | Pass |
The deviation ,in percent of the average side for each tiel from the average size of the 10 test speciment . | % | ±0.4 | +0.01 | Pass | ||
Thickness | % | ±5 | +4.21 | Pass | ||
Straightness of sides | % | ±0.2 | +0.06 | |||
Rectangularity | % | ±0.2 | +0.05 | Pass | ||
Center curvature | % | ±0.2 | +0.05 | Pass | ||
Surfaceflatness | Edge Curvature | % | ±0.2 | +0.05 | Pass | |
Warpage | % | ±0.2 | +0.08 | Pass | ||
2 | Surface quality | / | A minimum of 95% of the tiles shall be free from visible defects that could impair the appearance of a major area of tiles | Pass | Pass | |
3 | Water Absorption(E) | Average value | ≤ 0.5 | ≤ 0.3 | Pass | |
Individual value | ≤ 0.6 | ≤ 0.5 | Pass | |||
4 | Breaking strenghth | N | Thickness ≥ 7.5mm,not less than 1300N | 2187.3 | Pass | |
5 | Modulus of Rupture | Average value | Mpa | 48.1 | Pass | |
Individual value | Mpa | 46.1 | Pass | |||
6 | Thermal shock resustance | / | Test method availuble after 10 times testing | Pass | Pass | |
7 | Mark(On the package) | Manufacturer logo or/and Origin | Pass | Pass | ||
Quality mark | Pass | Pass | ||||
surfacecharacter ,GL OR UGL | Pass | Pass | ||||
8 | lra | ≤ 0.5 | Pass | Pass | ||
Application of Our Glazed Porcelain Tile:
- Q: whats the best way to remove it??? Put it on bathroom tiles but it is all chipping off and doesnt look pretty
- if you painted right over ceramic tile it should come off with a razor blade scraper -- if the paint is in the grout you may never get it off there-- not sure what type of paint you used -- some oil paints can be removed with laquer thinner or paint thinner ---
- Q: Is there a brand logo on the back of the tiles
- This is not sure, and some brand tiles have, and some brand tiles are not.
- Q: Installing support bars on bathtub ceramic tile
- If using a spade bit, buy two bits, a small one to drill a piolet hole then advance to the size that you need, if you have someone to help you can have them to spritz the bit with water constantly while you are drilling as the bit will get hot, you can also apply a piece of tape on the tile to help keep it from chipping out while drilling.....they also make a diamond bit for drilling tile and glass. Check at your local hardware store or Lowes, Home Depot, Menards, etc.....
- Q: my boss wants to remove floor tiles and stain the cement floor underneath the tile, what is a easy way to remove the old tile
- Wear okorder /... you will also need lots of rags and ventilation. I hope you meant vinyl tiles?
- Q: I just cant figure it out i must have wasted 10 pieces of tile trying the tile that is currently laid on the floor..it hasnt been cut at all to get it to fit..and its not two pieces..its one piece of tile that has 2 circles cut into it that fit perfectly that looks like the radiator was picked up and the legs placed into the holeshow do i do this? i know you are SUPPOSED to cut the tile in half and them put it back together..but..im just curious if there is a way im not thinking about??
- You have to buy a pair of tile nippers. And to be quite frank, the holes were probably drilled their first but, you have to score your tile in half and nip half circles in either one to replace it. In this case, you have to score your tile in thirds and mark where the holes should be and gently nip your half circles. A little at a time. Try this, get a piece of tile and mark where the holes should be and using a hole saw( a round saw that fits on a drill, a little larger than the existing pipe)then drill your holes While squirting water on it at the same time to prevent friction and when this is done, score your tile from the center of each hole. This should do the trick.
- Q: the third tile. All three tiles types have the same side length. Determine the shape of the third tile type.
- Where 3 tiles meet, they must add up to a full 360°. The formula for the interior angle of a regular n-sided polygon is: ((n - 2)*180) / n Plugging in n=4, the interior angle of a square is 90° Plugging in n=5, the angle of a pentagon is 108° The angle of the third tile is x and the 3 angles must add up to a full 360°: 90 + 108 + x = 360 Solve for x: x = 360 - 198 x = 162 Plug that into the original equation and solve for n: ((n - 2) * 180) / n = 162 (n-2) * 180 = 162n n - 2 = (162/180)n n - (162/180)n = 2 (18/180)n = 2 (1/10)n = 2 n = 2 * 10 n = 20 So the third tile must be from a regular icosagon (20-sided polygon) Answer: Regular icosagon; see the picture below.
- Q: How many squares are tiles?
- You say is the external walls or tiles ah, tiles is a piece of five.
- Q: Foreign ceramic tile brand
- You want to do tiles business, then these investments are much less of the more than a hundred thousand or so to almost more than 50 million
- Q: I am making a unglazed ceramic tile-mosaic table and I know I have to seal the tiles as well as grout and then seal the grout. Can I use a tile-sealer as a grout sealer? Or do I have two use two different products?
- as an installer of ceramic tile for 23 years i can feel confident that my answer will best suit you....aqua mix brand of sealers is some of the best and will seal both your UNGLAZED tile and seal your grout as well ....you need to use a penetrating sealer as it will chemically bond to the grout the other responses to your question has sealant problems because they used a silicone based sealant which is only good for 6 months and needs to be redone where the penetrating sealant is good for 15 to 20 years
- Q: Specifically, what type of drill bit is required that won‘t chip the tile.
- Also do not rush. Slow, slow, slow drill speed and minimal pressure. Having someone spray water while you drill also helps. Getting through the gloss layer is the hardest part as drill will want to slide. The tile bits you purchase at store will wear out after a few holes so keep fresh ones handy.
1. Manufacturer Overview
| Location | Guangdong, China (Mainland) |
| Year Established | 2003 |
| Annual Output Value | Above US$ 10 Million |
| Main Markets | North America South America Eastern Europe Southeast Asia Africa Oceania Mid East Eastern Asia Western Europe |
| Company Certifications | ISO 9001:2008；CCC,CE |
2. Manufacturer Certificates
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period |
3. Manufacturer Capability
| a) Trade Capacity | |
| Nearest Port | Foshan PORT, China |
| Export Percentage | 21% - 30% |
| No.of Employees in Trade Department | 21-50 People |
| Language Spoken: | English; Chinese |
| b) Factory Information | |
| Factory Size: | Above 100,0 square meters |
| No. of Production Lines | Above 4 |
| Contract Manufacturing | OEM Service Offered; Design Service Offered |
| Product Price Range | Average |
Send your message to us
Glazed Porcelain Tile CMAX-HB01
- Ref Price:
-
- Loading Port:
- China Main Port
- Payment Terms:
- TT or L/C
- Min Order Qty:
- 1 x 20' FCL m²
- Supply Capability:
- 100000 M2 Per Month m²/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
