Glazed Porcelain Floor Tile 600x600mm CMAX-Y6872
- Loading Port:
- Guangzhou
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 115.2
- Supply Capability:
- 100000 m²/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Basic Information:
Tile Type | Glazed Porcelain Tile, floor tiles |
Certificate | ISO13006, ISO9001 |
Finish | Matte Finish, Lapato Finish, Rough Finish |
Size | 60x60 mm |
Selection Range | Several Colors available |
Features:
1) Unique natural sandstone image designs and exclusive quality;
2) Used for indoor & outdoor wall and floor decorations, as well as Stair Case Product;
3) Easy to install, anti-dust, washable, acid-proof, alkali-proof, durable
4) Material: porcelain
5) Basic size: 600x600x9.8mm, 100x600mm, 150x600mm, 300x300mm, 300x600mm available based on clients’ requirements;
6) Available dimensions
Material | Porcelain |
Dimension | 600x600x9.8 mm |
Packing | Carton + Wooden Pallets |
Finish | Glossy, over 90 degree. |
Usage | Floor and wall |
The glazed porcelain tile is widely used for interior house flooring, hotel lobby flooring, exclusive brand showroom, clubs villas as well as other public sites.
We could go with OEM model, making 2nd production based on client’s requirement;
We could offer flexible service on shipment and better support on payment term;
Our quality guarantee is based on the strict production procedure, quality controlling on the shade, straightness as well as 2nd production and final package.
Specification and technical parameter:
· Matte Finish, Lapato Finish, Rough Finish
· Water absorption:<0.5%
· Anti-Resistance: R10
· Delivery Time: within 15~20 days after order confirmation.
· Package standard: 4pcs/carton, 40 Cartons/pallet, 32 Kgs/Carton.
- Q: Do you have, or know someone who has these tiles in the bathroom? What is their experience?
- No problems...I have them in the bathroom
- Q: i‘m planning to change the tiles in my tub area. whats the right way of doing this? should i change the drywall to cement backerboard? and how do i fix the joint between the new cement backerboard and the existing wall and ceiling which is textured? pls help!
- in case you're applying great 1ft sq. tiles, and your chum did a foul interest on the the mosaic tiles i does not propose doing it. the load of the tiles could loosen the the smaller tiles inflicting the bigger tiles to fall. this may be risky in a tub or bath section. The tiles could shatter leaving sharp little shards of tile everywhere, alongside with interior the flesh of everyone interior sight. i replaced into going to place sixteen x sixteen tiles in my bathe section, and a contractor suggested I greater constructive be useful the wall above the bathe is shelter because of the fact if one got here loose and hit me interior the top it does not be sturdy. I went with little a million x a million tiles on the ceiling with greater tiles on the wall. despite you submit is in basic terms going to be as shelter as what's in the back of it. in basic terms my opinion, yet for safeties sake, i could get rid of the previous tile and start up over. bear in mind, there is by no skill adequate time or funds to do it suitable the 1st time, yet there is often adequate time and funds to do it over!!!
- Q: Are you decorating the house with tiles or wood? why? How do you choose!
- Tiles of the shortcomings of the analysis: the use of home comfort, thermal insulation is poor; the use of regional limitations; individual tiles will be radioactive pollution; high cost, complex pavement, construction cumbersome, only hourly costs will 35-40 yuan / The Love home Xiaobian will be the advantages and disadvantages of wood flooring and floor tiles are analyzed, which is suitable for you, it depends on what you care about, according to their actual situation on the right, will love home dress up some.
- Q: can I lay porcelain floor tiles butted up with no grout. These will be laid on underfloor heating? They are quite large 600 x 600. Any info will help. Thanks
- No you shouldn t.. Dirt, dust and every day stuff will accumulate in the joints and be almost impossible to get out. All tiles are designed to have a space, some smaller and some larger than others. The grout the goes between the tiles is part of the system to make it stable. Sealing the grout is a major help in keeping it clean and stain free, if this is your concern. Porcelain is made to have a sanded grout along with a space of 1/8 to about 1/4 inch. Or 3/6 mm This spacing will also help make up for minor tile sizes that will throw you off if you try to but them tight. Any questions you can e mail me through my avatar and check my qualifications there.. GL
- Q: Tomorrow I will be laying porcelain tile in my kitchen and need help in figuring out how to cut a hole in the tile for the floor vent? Any input would be appreciated.
- I've done this: I've used an angle grinder to cut a rectangle in one bathroom tile. Straight cuts are easy using an angle cutter and a diamond wheel designed for cutting tile. I've even cut a round hole for the commode. But the commode had a tile seam under it, so I wasn't cutting a hole in the middle of a tile, I was able to cut and nibble away until I had a semi-circle in each tile. Just make sure you have more tile than you need. If (when) you make a mistake you have more to work with. And don't try to accomplish the entire cut all at once. Take little passes at it until you work your way through. Hope this helps. 'av'a g'day mate. '')
- Q: Used 600x300 glazed tile for the whole outdoor building. 30% tile gum and cement mixed for the work. 6 months later, the Tiles begun to fall off the wall leaving the cement still strongly bonded on the wall. I mean, the tiles ONLY fall donw, not with the cement. Note: We usually soak SOME ceramic tile with water before pasting them, IF the type call for that. But the type is apparently out of the case of water solution.Granite is even heavier than that and yet lasts virtually with building.
- Outdoor Wall Tiles
- Q: What‘s the difference between tile mastic tile adhesive? I was told to paint the wall w/paint primer first then use tile adhesive rather than tile mastic to apply tiles on damaged green board around my jaccuzzi tub for a quick fix. The green paper peeled off when removing the old tile exposing the brown cardboard stuff.
- tile mastic is usually a dry powder and you add water to it. tile adhesive is a premix that's like peanut butter that you could apply to the wall or the tile. The primer is to help glue the paper back one the gypsum. Then when you put the adhesive on, it'll stick longer. If you get the grout and adhesive mix, then you won't have to grout later, and I use it a lot in doing quick fixes. Comes in different colors and I use the unsanded cause it doesn't have to have much space between tiles to work. Put enough on the back of the tile along the edges so it oozes out. Good luck
- Q: I just grouted the ceramic tiles I laid in my kitchen. The grout was supposed to be a dark maroon color, but it turned out a whitish powdery color (efflorescence). What is the main cause of this...it can't be water coming from underneath the tiles because the basement is underneath the kitchen floor...unless it came from the mortar under the kitchen tiles. How do I get rid of the efflorescence. Grout cleaner didn't work...should I use salfamic (spelling?) acid and scrub the grout lines? Can J just refloat new grout over the existing grout? HELP...I need to put my base cabinets in, but I can't stand looking at my floor the way it is.
- You need to go to a regular tile shop and get the cleaner made for this. The cause of it can be many , for not mixing enough to washing it w/ to much water during grouting. Regular grout cleaner won t cut it. There are several brands that do this so going to XYZ tile place and asking for something they may not have that brand but a brand they use on occasion or a brand available to them. HD does carry a bottle called Remove by Hydroment . You may want to try that And you cannot just grout over it the grout will not adhere and stay, it doesn t have enough to grab onto. Any questions you can e mail me GL
- Q: I applied sealer to Mexican tile and within a few hours, it rained.The finish on the tiles now is cloudy. Will this clear with time as everything dries or should I bake the tiles to burn off the water trapped in the sealer?
- The cloudiness you see is called blushing--the remedy will depend on the finish that you used. If it a lacquer you can use blush eliminator, I have never tried it on shellac or enamel. It may go away after it is dry however. Sometimes the moisture in the air will cause the finish to blush.
- Q: I‘m looking to replace a ceramic tile floor in my kitchen with a different style ceramic tile. The contractor says I have two options. He can either lay the new ceramic tile on the old, which will be cheaper than bringing up the old tile but then the floor will be raised 1 to 1 1/2 above current level. Or, he can take up the old ceramic tile but then he‘d have to remove the old layer of plywood and put down a new layer, which will be more labor-intensive and expensive. Is there any other issues regarding these two scenarios that I should take into account?
- The largest advantage to taking up the old floor and replacing the sub floor is that you get a chance to see if there are any underlying problems (i.e. rot, unevenness, cracks). When I had my floor tiles removed and replaced, it was found that the original sub floor was improperly installed, was rotted by the kitchen door, and was hiding some structural issues. Sounds scary I know, but I would rather find out about these things and fix them before laying a new floor than having to rip up said new floor later to fix them.
Send your message to us
Glazed Porcelain Floor Tile 600x600mm CMAX-Y6872
- Loading Port:
- Guangzhou
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 115.2
- Supply Capability:
- 100000 m²/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches