Fiberglass Drop Ceiling Panels - Black Spray Good Quality Fiberglass Ceiling
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT or LC
- Min Order Qty:
- 3000 m²
- Supply Capability:
- 10000 m²/month
OKorder Service Pledge
Quality Product, Order Online Tracking, Timely Delivery
OKorder Financial Service
Credit Rating, Credit Services, Credit Purchasing
You Might Also Like
The tile is made by high-density fiberglass with compound decoration wool on the surface and fiberglass wool on the back .The edges are painted. With the characteristics of square in edges and angle,it will be parallel to suspension system after installation.
Product Applications:
office building, commercial facilities,
shopping mall, Airport and school,Halls etc.
Product Advantages:
1)Incombustibility/Non-flammability: Consmos Calcium silicate board is non-flammable and conforms to the national grade A standard (GB8624 Grade A) with excellent fire resistance property. In case of fire, the board will not burn and not give off toxic smoke.
(2)Thermal/heat insulation: Owing to low heat conductivity, the product has good performances on keeping warm and heat insulation.
(3)Water-proofing and moistureproof: The product is allowed to long-term exposure to moist environment but still very stable. The board still keeps intact after being soaked in water for one month, the phenomenon of swelling and out of shape will not happen. It has good adjusting mechanics like woods. Even it is used on wash house.
(4)Endurance/durability: Consmos Calcium silicate board provides good insulation against bugs, fungus and corrosion. It can last for a long time and will not corrode.
(5)Noise-proofing: Consmos Calcium silicate board provides good insulation against noise.
(6)High-Strength and Light weight: The board is light weight, in this case, it can decrease weight of building greatly. At the same time, the material is high-stength and not easy to be damaged.
Main Product Features:
1) Use fiberglass wool as raw material
2) Good photopathy, noise and thermal insulation, fire resistance, easy to install and maintenance
3) Widely used in the places with special requirements to light
4) Edges: square, tegular, concealed
5) NRC: 0.8 - 1.0
6) Level of fireproofing:A2
Raw material: level A (incombustible class)
b) Surface: A2 flame( resistant class)
7) Coefficient of heat preservation: 0.046W / (M.K)
8) Radioactive species limitation: None
Product Specifications:
FAQ:
Question 1: Where is your factories?
Our factories in different areas of China, such as Shandong Province, Hebei Province, etc.
Question 2: May I get some samples of the product?
Yes, of course. If you need, we could sent you the small samples by the reliable delivery company such as DHL etc.
Images:
- Q: How the old house wall moldy
- New house for a long time, especially the old house, is likely to find a phenomenon: the house wall moldy black. Under normal circumstances is due to the appearance of the inner wall of the condensation for a long time the condensation of water droplets flowing on the emergence of watermark time long moldy green gradually black hair formation spots. What about this situation? Immediately give you an analysis of the reason for the right medicine.
- Q: My house has not been renovated, according to the upstairs that he bought the best waterproof glue, do a number of waterproof treatment, try to see the water did not see a leak, told me to be assured! What is the possibility of future leakage? Thank you
- Well, you should do more waterproof waterproof comparison
- Q: My bathroom because of a variety of pipelines have been well, if the installation of tiles, then all the re-waste and then get, very troublesome! I would like to ask you there is no one can brush directly on the bathroom wall paint, asked to take a shower when the cold water will not fall in the above, hot water rushed in the above will not have any reaction. Have a friend please know please! Thank you!
- Toilet brush waterproof coating precautions 1, pay attention to the next to the water pipe to be careful, you can brush a few times, or even to the end there is no residue directly into the tube around. This place is easy because the brush is uneven, and seepage. 2, the walls around 30 cm brush, shower area brush one meter eight, the width of the shower area to the limit. 3,24 hours of closed water test, you must go downstairs to see if there is leakage phenomenon, no words, paste tiles.
- Q: What is foam insulation
- Phenolic foam Phenolic foam is a polymer organic rigid aluminum foil foam products, is made of thermosetting phenolic resin foam, it has a light, fire, case of fire does not burn, smoke, non-toxic, no dripping, the use of temperature Wai wide -196 ~ +200 ℃) is not shrinkage and no embrittlement in low temperature environment. It is an ideal insulation material for HVAC refrigeration. Because of the high porosity of phenolic foam, the thermal conductivity is low, the heat insulation performance is good, and it has water resistance and Water vapor permeability, is the ideal insulation energy-saving materials. As the phenolic has a benzene ring structure, so the size is stable, the rate of change <1%. And the chemical composition of stability, anti-corrosion anti-aging, especially organic solvents, strong acid, weak alkali corrosion. In the production process without foaming fluoride to do in line with international environmental standards, and its molecular structure contains hydrogen, oxygen, carbon elements, pyrolysis, the overflow of gas non-toxic, tasteless, harmless to the human body, the environment, In line with national green environmental requirements. Therefore, the phenolic super-composite board is the best fire, adiabatic, energy saving, beautiful green green insulation materials.
- Q: Hello, our house has a big crack in the ceiling running from on wall to the other ( only about 3 feet cause its a entrance way) and I was wondering if there is anyway to fix it properly? We will be selling the home in a year and don't want it to scare anyone off BUT also don't want to just paint over it ( may get sued for concealing a problem). Any ideas or thoughts? Are we screwed and may have to leave it and the house won't sell as fast?:(
- All houses settle - sometimes the contractors screw up and the rock is not attached well causing a seam to sag. Or maybe there is a leak from overhead plumbing. In any case it is not expensive to rip a small section of wall down inspect the area and put new sheetrock up. I strongly suggest you do this not only for your own peace of mind but cosmetically. Then fix the area and plaster and paint.
- Q: What is the crystal structure of MgCl2
- Chemical Name: Magnesium Chloride [1] (MgCl2) Chemical Description: English name is magnesiumchloride. The chemical formula MgCl2 is composed of 74.54% chlorine and 25.48% magnesium, with a relative molecular mass of 95.21. Was colorless hexagonal crystals. Density 2.316-2.33 g / cm 3. Melting point 714 ° C. The boiling point of 1412 ℃. Usually contains six molecules of crystal water, that is, MgCl2 · 6H2O, easy deliquescence. For the monoclinic crystal, with or salty, there is a certain corrosive. Its density 1.569 g / cm 3, the melting point of 116-118 ° C, while decomposition. Soluble in water, heating and dehydration and hydrogen chloride from magnesium oxide. Use [2]: for the production of metal magnesium, disinfectant, frozen brine, ceramics, and used to fill the fabric, paper and so on. The solution and magnesium oxide mixed, can become hard wear-resistant magnesia cement. Method: from magnesium oxide or lime soil and hydrochloric acid role in the system. Seawater and salt brine are present in the presence of magnesium chloride. The shape of magnesium chloride [3]: generally in flake, block, crystal, particles and powder-based. Content of about 46% of magnesium chloride hexahydrate, 99% of anhydrous magnesium chloride. Magnesium chloride Chemical and physical properties: soluble in water and ethanol. Sensory indicators: white crystals, columnar or needle-like, bitter taste.
- Q: What is the space body?
- In the humid environment, can also be used single or double perforated plate for the sound absorption layer (to increase the absorption of low frequency, perforation rate is generally less than 5%), instead of porous materials. ④ hanging pieces. Such as metal lugs, hooks, bolts and so on. When used, the surface are placed in the sound field, is conducive to give full play to the sound absorption of the material. The effective sound absorption area of ??a single sound absorber is much larger than the geometric projection area, so if the projection area is calculated, the sound absorption coefficient can be greater than one. The characteristic is usually expressed by the effective sound absorption, which depends not only on the nature of the body itself but also on the interval between the absorbers but not in a linear proportion. So the best design should be the use of the least sound absorber unit, get as much as possible sound absorption effect. It is generally believed that if the plate-like sound absorber is used, the total area is 30% -40% of the flat top area of ??the room, the sound absorption efficiency can reach the best value and the economic effect is the best. Space absorber is mainly used to reduce the reverberation time in the hall and factory workshop and the sound level of the reverberation field. It has many advantages such as flexible design, simple installation, convenient installation and beautiful appearance. But it should also be noted that only in the original indoor sound absorption is very small, reverberation field is very strong circumstances, and the noise reduction effect is usually not more than 10dB, generally between 3-8dB, the best will not exceed 15dB The
- Q: How to conduct a comprehensive review of self-leveling
- Self-leveling construction should pay attention to the three elements: ① humidity: ground moisture content should be less than 3% (self-leveling manufacturers require to keep the soil surface dry). Use CCM moisture tester. ② surface hardness: with a sharp chisel fast cross cut the surface, the intersection should not be burst. Use a hardness characterizer. ③ surface flatness: with 2 m ruler test, the gap should not be greater than 2mm. Use the flatness tester.
- Q: I have hanged the drywalls on both the ceiling and walls. My questions is how should I tape the joints between the ceiling and walls? Should I use a regular paper tape, a fiberglass mesh or a paper corner bead (inside corner)?
- On a full sheet, the factory edge is dished down for taping. When to factory edges are stacked together, or nailed one along the other, use mesh tape, this is a freebie. Fill it up with a 5-6 knife and wipe off excess with 9 or 12 . On the long side of a full sheet this edge is not tapered and is called the butt end. Two sheets nailed together is the butt ends. This is optional. Mesh is easier, paper tape is better. Corners take paper tape. Spread a coat of mud with either a flat knife to both sides or use a inside corner trowell that does both sides. Crease tape into 90 angle. Lightly slide into corner, hold with left hand, and strech an place lightly with the other. Take your corner trowell and run over paper tape lightly spreading out mud, and tape. If there are any blister areas, you didn't get enough mud on the wall. Lightly lift tape and mush some more mud under the tape. Resmooth out the mess the best you can. On corner bead, nail evenly from center up and center down with opposing nails. Cover these with a coat of mud with a 6 knife and pretend like you know what you're doing and have a little fun.The drywall god's wisdom is this. After the first coat has completely dried(overnight) do not sand. Take you knife and knock off high chuncks and spread another coat. After it has dried completely, knife again and put on your last coat. You should be looking good by now. Then you can lightly sand. Don't bother with a sponge if you want a truely good job, because they follow the contour of what's there. Lightly sand and it should come out puss.
- Q: My insulation was installed paper towards the roof.
- If it's in direct contact with the ceiling, the paper side should be down, as noted by most of the other posters. But if the insulation is in addition to something that was already there, it should be installed without the paper at all so that the vapor barrier doesn't trap excess moisture in the previously existing insulation.
Send your message to us
Fiberglass Drop Ceiling Panels - Black Spray Good Quality Fiberglass Ceiling
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT or LC
- Min Order Qty:
- 3000 m²
- Supply Capability:
- 10000 m²/month
OKorder Service Pledge
Quality Product, Order Online Tracking, Timely Delivery
OKorder Financial Service
Credit Rating, Credit Services, Credit Purchasing
Similar products
Hot products
Hot Searches
Related keywords
