Fiberglass Woven Roving 24 Oz - e-glass woven roving-800gsm
- Ref Price:
-
- Loading Port:
- China Main Port
- Payment Terms:
- TT or LC
- Min Order Qty:
- 16000 kg
- Supply Capability:
- 160000kg Per Month kg/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Products Description
1.E glass woven roving 800gsm can be used for manufacturing all kinds of FRP products,such as FRP tank,FRP pipe etc.
2.Compatible with unsaturated polyester,vinylresin ,epoxy resin.
Characteristics
1.Consistent thickness and excellent surface treatment.
2. Rapid impregnating and good compatibility with resin.
3.Uniform tension,high dimensional stability and making handing easy.
4.Good mechanical properties and high strength of parts.
Technical Data Sheet
TEST ITEM | STANDARD | STANDARD VALUE | AVERAGE VALUE | RESULT | ||
AREA WEIGHT (G/M2) | iso3374 | 800+/-5% | 810 | yes | ||
WIDTH (MM) | iso5025 | 1250±20MM | 1250 | YES | ||
FABRICS COUNT (ENDS/10CM) | WARP | iso4602 | 18±2 | 18 | yes | |
WEFT | iso4602 | 18±2 | 15 | YES | ||
TENSILE STRENGTH(N/50CM) | WARP | iso4606 | ≥4000 | 4015 | yes | |
WEFT | iso4606 | ≥4000 | 4015 | YES | ||
moisture CONTENT (%) | iso3344 | <=0.15 | 0.1 | yes | ||
LOSS ON IGNITION (%) | iso1887 | 0.4-0.8 | 0.5 | yes | ||
FAQ
Package and Storage:Eech roll is packed by polyester bag,and then put into a cardboard box or plastic wowen bag.The weight of each roll is between 20 to 85 Kg, The rolls are to be horizontally placed and could be in bulk or on pallet.Optimum storage conditions are between the temperature of 5～35℃ and with the humidity between 35%～65%.The product should be used within 12 months from the time of delivery and remain in theiroriginal packaging until just prior to use.
- Q: What is the technological process of glass?Fiber?chopped?strand mat?
- Fiber reinforced epoxy resin composite material forming process. Compared with traditional materials, the composite material has a series of irreplaceable characteristics, which has been developed rapidly since the second world war. Although the production is small, but the level of composite materials is one of signs that marks national or regional science, technology and economic level. Composite material is mainly composed of two parts: reinforced material and base material. Reinforced material: In composite material, some reinforced material such as the glass fiber in glass?reinforced?plastics and carbon fiber in CFRP(carbon fiber reinforced material) give major mechanical property to composite material. Matrix: Matrix is a single material which aims to make composite material as a whole such as resin in glass?reinforced?plastics( epoxy resin referred in this paper). Composite materialcan be divided into three kinds according to the matrix material: resin composite material, metal matrix composite material, and inorganic nonmetallic composite material such as ceramic matrix composite material.
- Q: Can you describe the production process of glass fiber and the production process?
- There are clay crucible method-the most primitive method; platinum substitute crucible, with the raw materials for the production of glass fiber glass and the poor quality of products and pool kiln method, with the process of high energy consumption, which is banned, where the the raw material is powder mixture with pyrophyllite. Platinum crucible method is widely used at present. Tank furnace method" is the most advanced technology and the main raw material is waste broken glass
- Q: An introduction to glass fiber window?screening
- It is made of glass fiber and PVC. The weave and process uses glass fiber monofilament plastic coated process and is formed by weaving, heating and shaping.
- Q: The difference between glass fiber plain cloth and glass fiber woven roving.
- According to the weight and width, there are many models including 200 g, 400 g, 600 g and 800 g. The width of 900, 1000, 1270 and 1400 are commonly used. The width is from a few centimeters to 3 meters and the weight is from 60 to 800.
- Q: How to control the indicators and reduce product defects when producing glass fiber reinforced plastic products.
- Resins require low viscosity and are easy to operate manually. (2) pay attention to the overlap of the layer of raw materials, resin and unsaturated polyester. Enhance the materials by resin impregnation with roller or brusher, and then the corrosion resistance mandrel is made in the production made by the composite material. (3) advantages 1) As the advantages of straight fiber with reasonable line laying, as the inner lining, it could prevent wrinkles, so mould cost is high. Although the composite products are usually single shell. Twistless roving is used to priduce tube tank. (4) Disadvantages (1) It belongs to the labour intensive production. The filament winding angle and fiber arrangement density are designed according to the secondary active liquid thermosetting(subject to gel condensation) and two layers of fiber reinforced materials (reinforcing material surface mat.) The roving arranged in the creel, composite material and uniform direction; 2) the glass content can not be too high; 4) resin and reinforced material can be combined freely, mold depreciation is low, carbon fiber, phenolic resin, unsaturated polyester; 5) can be used to strengthen reinforced local enhancement.
- Q: how to produce glass?reinforced?plastics grating
- It is formed by glass fiber after extrusion.
Send your message to us
Fiberglass Woven Roving 24 Oz - e-glass woven roving-800gsm
- Ref Price:
-
- Loading Port:
- China Main Port
- Payment Terms:
- TT or LC
- Min Order Qty:
- 16000 kg
- Supply Capability:
- 160000kg Per Month kg/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
