Fiberglass Supply Roving Tape - e-glass woven roving-360gsm
- Ref Price:
-
- Loading Port:
- China Main Port
- Payment Terms:
- TT or LC
- Min Order Qty:
- 16000 kg
- Supply Capability:
- 160000kg Per Month kg/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Products Description
1.E glass woven roving 500gsm can be used for manufacturing all kinds of FRP products,such as FRP tank,FRP pipe etc.
2.Compatible with unsaturated polyester,vinylresin ,epoxy resin.
Characteristics
1.Consistent thickness and excellent surface treatment.
2. Rapid impregnating and good compatibility with resin.
3.Uniform tension,high dimensional stability and making handing easy.
4.Good mechanical properties and high strength of parts.
Technical Data Sheet
TEST ITEM | STANDARD | STANDARD VALUE | AVERAGE VALUE | RESULT | ||
AREA WEIGHT (G/M2) | ISO3374 | 360+/-5% | 362 | yes | ||
WIDTH (MM) | ISO5025 | 160±20MM | 160 | YES | ||
FABRICS COUNT (ENDS/10CM) | WARP | ISO4602 | 32±1 | 32 | yes | |
WEFT | ISO4602 | 19±1 | 18 | YES | ||
TENSILE STRENGTH(N/50CM) | WARP | ISO4606 | ≥4000 | 4015 | yes | |
WEFT | ISO4606 | ≥4000 | 4015 | YES | ||
moisture CONTENT (%) | ISO3344 | <=0.15 | 0.1 | yes | ||
WARP ROVING(TEX) | 600 | 600 | YES | |||
WEFT ROVING(tex) | 900 | 900 | YES | |||
LOSS ON IGNITION (%) | ISO1887 | 0.4-0.8 | 0.5 | yes | ||
FAQ
Package For Products:Eech roll is packed by polyester bag,and then put into a cardboard box or plastic wowen bag.The weight of each roll is between 20 to 85 Kg, The rolls are to be horizontally placed and could be in bulk or on pallet.
Storage For Products:Optimum storage conditions are between the temperature of 5～35℃ and with the humidity between 35%～65%.The product should be used within 12 months from the time of delivery and remain in theiroriginal packaging until just prior to use.
- Q: What is glass fiber?
- It has the advantages of good insulation and corrosion resistance. The diameter of monofilament is from several microns to twenty micron. It uses glass ball or waste glass as raw material and is produced by high temperature melting. Glass fibre is usually used as reinforced composite materials, but its drawback is crisp. It features with poor abrasion resistance, good heat resistance and is used as electrical insulating materials and heat/thermal insulation materials. Its diameter is equal to that of a hair. Each bundle fiber raw silk is formed by hundreds or even thousands of monofilament with high mechanical strength. Glass fiber is a kind of inorganic nonmetal material with excellent performance.
- Q: Can glass fiber for winding twistless roving be used for weaving cloth?
- Yes, twistless roving are used as warp and weft directional material for twistless roving cloth.
- Q: Glaglass?reinforced?plastics doors and windows and broken aluminum alloy door and windows, which one is more practical?
- At present, the broken bridge aluminum is applicable.
- Q: Main characteristics of glass?reinforced?plastics grating
- long period of installation and use, aging resistance, free maintenance and so on. llightweight, glass fiber content of more than 30% (weight percent), beautiful. Glass?reinforced?plastics grating is based on unsaturated polyester resin (includes isophthalic,ethylene, phenolic aldehyde, bisphenol A) and is made up of glass fiber roving( wind or pultrusion, middle-alkali or non-alkali). It is formed by weave and mould pressing in metal mould or by heating after hand lay-up with impact resistance, steadiness, skid?resistance, anticorrosion, fire?retardant and weather resistance. Moreover, this product with insulation and thermal insulation property is flat in appearance, good in quality and is easy to cut.
- Q: Where is atmospheric toxic liquid containers and how to operate it ?
- Color should be in accordance with the provisions in table 3 and it is not easy to fall off. Firstly, the surface of tube should be painted with soapy water or totally soaked in water. Rubber products should features with corrosion resistance and oil resistance. It should process liquid injection port sealing test.The technology file includes the following. Tank manhole and liquid injection port and strength layer can use resin with corrosion resistant as base material. When tank is out of factory, its surface hardness value should over 34. The defination of automotive paint coating. This standard uses the following definitions. It is in accordance with the JT with the minimum wall thickness is 5mm. Its head should adopt elliptic type head. The application of nitrogen should be adopted and it should be located at the right side of tank. The resin content should be controlled within 30% ~ 35% with the intake valve should be closed. A horizontal wavy plate should be installed. The test should be processed on a dedicated vent valve. Tank mark. A ring paint belt presenting transport liquid should be sprayed around the center line of the tank. Name of manufacturer. According to the method used in test 5, the outer surface should be smooth and oxygen content should between18% and 23% (volume ratio). Elliptical tank cross-section axial ratio is not greater than 2.12. The tank has vehicle safety requirements. The tank has not been thoroughly cleaned with its width is not less than 350mm. It is enduring dilute acid base rubber hose.
- Q: The difference among organic glass, glass steel and acrylic.
- It is composed of methyl methacrylate monomer (MMA) polymerization, having the same life of the building. After a special process, the two kinds of composite organic glass acrylic (acrylic) can be compound, with the English name Acrylic. The extrusion can better control the thickness of the plate.
- Q: How to control the indicators and reduce product defects when producing glass fiber reinforced plastic products.
- Resins require low viscosity and are easy to operate manually. (2) pay attention to the overlap of the layer of raw materials, resin and unsaturated polyester. Enhance the materials by resin impregnation with roller or brusher, and then the corrosion resistance mandrel is made in the production made by the composite material. (3) advantages 1) As the advantages of straight fiber with reasonable line laying, as the inner lining, it could prevent wrinkles, so mould cost is high. Although the composite products are usually single shell. Twistless roving is used to priduce tube tank. (4) Disadvantages (1) It belongs to the labour intensive production. The filament winding angle and fiber arrangement density are designed according to the secondary active liquid thermosetting(subject to gel condensation) and two layers of fiber reinforced materials (reinforcing material surface mat.) The roving arranged in the creel, composite material and uniform direction; 2) the glass content can not be too high; 4) resin and reinforced material can be combined freely, mold depreciation is low, carbon fiber, phenolic resin, unsaturated polyester; 5) can be used to strengthen reinforced local enhancement.
- Q: How to maintain the GRC exterior wall decoration components?
- According to DST, The texture of GRC wall decoration component must be alkali resistant glass fiber for reinforcement with right angle.
Send your message to us
Fiberglass Supply Roving Tape - e-glass woven roving-360gsm
- Ref Price:
-
- Loading Port:
- China Main Port
- Payment Terms:
- TT or LC
- Min Order Qty:
- 16000 kg
- Supply Capability:
- 160000kg Per Month kg/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
