Dual-core Cable 2x1.5mm² made in China
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 0 m
- Supply Capability:
- 10000 m/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Description of Dual-core Cable 2x1.5mm²
Dual-core Cable PV-2x1.5mm²
Main Features of Dual-core Cable 2x1.5mm²
Dual wall insulation, Electron beam cross-linked
Excellent resistance to UV,water,ozone,fluids,salt,general weathering
Excellent resistance to abrasion
Halogen free, flame,ratardant,low toxicity
Excellent flexibility and stripping performance
High current carrying capacity
TUV and UL approved
Specifications of Dual-core Cable 2x1.5mm²
TYPE | Cross section | Strand design | Conductor diameter | Conductor resistance | Outer diameter | Rated voltage | Rated current |
mm² | NO.xФ(mm) | mm | Ω/Km | mm | VAC/DC | A | |
PV-2x1.5mm² | 1.5 | 30.xФ0.25 | 1.6 | 13.9 | 5.10x10.20 | 1000/1800 | 20 |
Technical Data of Dual-core Cable 2x1.5mm²
Wire:Class5 tinned
Insulation material: XLPE
Double insulated
Halogen-free
HIgh resistance against oils, greases,oxygen and ozone
Microbe-resistant
UV resistant
High wear and abrasion resistance
Flame test according to :DIN EN 50265-2-1 UL 1571(VW-1)
Smallest permissible Bending Radlus 5xD
Temperature range -40℃~+90℃
Colours: Black Red
IMages of Dual-core Cable 2x1.5mm²
FAQ:
① why from okorder？
Okorder is a qualified supplier of all kinds of building matierials in China. All products have been showed in Okorder website are under well controlled by okorder QC team.
All products had been produced under a clear quality standard and the quality is consistence among the shipments.
Okorder has already setted up more than 20 warehouses in different markets to show the products. You are convenient to know the products from your local place and it will help you to make decision easyly.
②How to guarantee the quality of the products？
We have established a perfect quality management system，as for raw material and semi parts all are under strict quality test and we have a IQC system to control the purchases.
QC on site is very strict and all steps of process are measured per drawings. Before delivery, we set a OQC system to make sure each piece meet the standard of order.from design to delivery,
③How long can we receive the product after purchase?
Lead time depending on order quanity, The normal order can be deliveried with 3 weeks.
- Q: So, I built my first computer 6 months ago, only to have the power supply fail, and maybe fry the CPU or the motherboard (hope not), and I ordered the XFX 550W from newegg. Now I built the computer, but this is actually going to be the first time I'm taking out the cables of the power supply to the motherboard, and it looks like it's quite tightly in there, do I just take it out by force? I don't want to exert too much pressure because I'm a pussy and I don't want to ruin it haha.
- The HDD power cable has no clips, the SATA cable usually does though. The ATX power cable especially (20/24pin) will give quite a lot of resistance, just make sure to keep pushing the clip down while pulling up equally, meanwhile, keep an eye on the motherboard, it'll flex and bend as you pull it up, but yes, you will have to pull quite hard to get things out, harder than you would normally think, I was the same as you, I keep thinking if I pull/push too hard or force things they'll break, but components are far more robust and resistant than you think.
- Q: Cable yjv-0.6 / 1kv-4 * 120 + 1 * 70 What does it mean?
- "Electrical design of civil buildings," 8.10.13; steel cable bridge straight section length of more than 30m, aluminum or glass fiber reinforced plastic cable bridge length of more than 15m, should be set up expansion joints. Cable bridge across the building deformation joints, should be set compensation device. The telescopic section is set for temperature change; the compensating device is to prevent settlement at the deformation.
- Q: I've got a 1994 Mitsubishi Eclipse GS 1.8 and I can't find any place to put the amp cable through the firewall! Any tips would be greatly appreciated. Thanks ;).
- It's simple really. If you have a drill will a power cord attached to it, simply drill a hole big enough for the power wire to fit thru. Try to do it about midway down the firwall as to not hit anything in your dash. Thats where I have done it before and have had no problems whatsoever out of it.
- Q: a. the potential difference between the forward and rear feet when the bear crawlsb. the potential difference between the bear and the cablec. the coulomb force between the bear who obtains charges when passing by the cable and the cabled. none of them
- e. the bear touched the stupid wire
- Q: lost the original cable at a gig, but I have another cable. the outlet on the Behringer guitar amp reads quot;Use only with 250V fuse, but right above the outlet it reads 220-240 with a upside down triangle next to it (not sure if this represents volts or not...I know obviously V stands for volts, but this is a upside down solid triangle.)My power cable/cord that i found reads 10A 250VI know i should probably purchase one direct from the manufacture, but that is not possible right now. I have a gig coming up this weekend.thanks for any help.I also mention the original power cord was a two prong (that went into the outlet) - the one i might use is a 3 prong. will this still be safe? It does fit into the back of the amp perfectly.
- Assuming you're in a place where the outlets provide 220 to 240 volts, it's fine. The 250 volts on the power cord just means it's good for *up to* that.
- Q: the cable for my psp wont plug all the way in anymore so i cant charge it. nothing has happened to the psp. it wasnt dropped or anything, just sat on the table. same with the power cord.anyone else have this problem and if so what did u do about it.and if your thinking about saying quot;contact sonyor anything like that...just leave. i can figure that out for myself ok.
- MMMM. im not sure i think you might need to buy a new one if you try to force it in you might break something
- Q: What cable am I supposed to use for power?
- That kind, it's kind of hard to see on the OKorder pic. Usually your switch should come with a console cable and the power cord, unless you bought it used. The person probably kept it.
- Q: Okay so I am trying to upgrade my graphics card and In order ti di That I need a new Power Supply Unit. The PSU I was looking at is a 850 watt one and it has six pin connectors. The problem is all my componets are 4 pin connectors. If I get the new power supply can I somehow get a 6 pin connector to fit in a four pin like a adapter or something. BTW in order for the graphics card to function I need a six pin but all my other stuff in 4. So is there a way to work that out
- exchange the PSU, for a extra powerful one. 430W @80percentefficiency = 344W 500W @80percentefficiency = 400W 600W @80percentefficiency = 480W 650W @80percentefficiency = 520W 700W @80percentefficiency = 560W 750W @80percentefficiency = 600W 800W @80percentefficiency = 640W 850W @80percentefficiency = 680W 900W @80percentefficiency = 720W 950W @80percentefficiency = 760W 1000W @80percentefficiency = 800W minimum PSU 700W-800W.
- Q: My ISP had installed an outdoor antenna from where a white RJ45 cable runs into a little white box (which is plugged into AC outlet) and from the same white box i do have another RJ45 jack plugged into my laptops NIC card. I came to know that the white ethernet cable is Power over Ethernet cable which carries the power as well as data. I just want to know if i can plug that ethernet directly into my laptops NIC card ? Can i do that will there be any harm to my laptop's NIC ??
- Hi lets clear up a few points the 56k modem port is dial up. its ideal if you have only a phone line to connect to the internet. its maximum down load data rate is 56k/bits a second, but is actually only capable of 7k bytes a second maximum or 7 kilo characters a second. RJ 11 is the connector a 4 element connection. RJ 45 is an ethernet cable with 8 elements when connected to a home hub or ADSL modem depending on the service supplied can be anything you pay for it can be as slow as the 56k and it can be 48g/bits/sec which would cost about 200 thousand dollars a year. Now a myth that needs to be explained wifi is going to be slower than the direct ethernet connection as it needs translation in to wireless from the ethernet connection. Most laptops of the type describe have an ethernet socket. the 56k dial up connection is still good should the ADSL connection fail provided you can still use the telephone to call someone. Be warned you only get what you pay for a cheap ADSL will only give a small down load data rate at the busiest time of day probably no faster than the dial up connection.
- Q: printer is powered on. cables are securely connected. printer has ink and paper. printer installed as network printer on all client computers. other users are able to print to the printer. but printer not working on the other computer
- Check if the other computer has the printer as default. Go to printers and faxes and check from there.
Send your message to us
Dual-core Cable 2x1.5mm² made in China
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 0 m
- Supply Capability:
- 10000 m/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
