Aluminum foil stock, don't miss it!
- Ref Price:
-
- Loading Port:
- China Main Port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- -
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Aluminium is a relatively soft,durable, lightweight, ductile and malleablemetalwith appearance ranging from silvery to dull gray, depending on the surfaceroughness. It is nonmagnetic and does not easily ignite. A fresh film ofaluminium serves as a good reflector (approximately 92%) of visible light and an excellent reflector (asmuch as 98%) of medium and far infrared radiation. The yield strengthof pure aluminium is 7–11 MPa, while aluminium alloys have yield strengths ranging from200 MPa to 600 MPa. Aluminium has about one-third the density and stiffness of steel.It is easily machined, cast, drawn and extruded.
Aluminium alloys (or aluminum alloys; see spellingdifferences) are alloysin which aluminium(Al) is the predominant metal. The typical alloying elements are copper, magnesium,manganese,silicon,tin and zinc. There are twoprincipal classifications, namely casting alloys and wrought alloys, both of which are furthersubdivided into the categories heat-treatableand non-heat-treatable. About 85% of aluminium is used for wrought products,for example rolled plate, foils and extrusions.Cast aluminium alloys yield cost-effective products due to the low meltingpoint, although they generally have lower tensile strengthsthan wrought alloys. The most important cast aluminium alloy system is Al–Si,where the high levels of silicon (4.0–13%) contribute to give good castingcharacteristics. Aluminium alloys are widely used in engineering structures andcomponents where light weight or corrosion resistance is required
Secification:
Alloy : AA1235/1050/1060/1100/3003/8011/8006/8079/8021etc.
Temper: H14/16/18/22/24/26, HOetc.
Thickness: 0.006mm—0.20mm
Width: 200mm—1600mm(Can be slitted)
Coating : HSL/Primer
Color : Accordingto customers’ requirements
Feature:
100% safe
Environmentally friendly, recoverable and recyclable
Used for storing, packing, grilling/ baking, heating andfreezing
Customized orders available
High-temperature sterilization
Aplication:
Food Packing, Household Application, Cigarette Packing,Lamination, Medicine , Printing, Heat Sealing, Beer Packing, RoofInsulation Materials, Honeycome Materials and so on.
Packaging Detail: Carton ,Wooden pallet with plastic protection packing,standard seaworthy packing or as your request.
ProductionCapacity:
AnnualProduction capacity of 600,000 tons.
Products areexported to United States, Canada, U.A.E, Brazil, Mexico,Thailand, Vietnam,Nigeria etc, over 100 countries andregions all over the world.
Coveredfactories with full production line
CNBM aluminumproduction base is comprised of 18 aluminumannealers, 10 coil and foilmills, 4 continuous production lines, 2hot rolling production line and 3prepainted lines.
FAQ:
1. What is the form of payment?
Normally 30% TT, L/C
2. Type of quotation?
FOB, CFR, CIF
3. Port of loading?
Shanghai port
4. Delivery time?
40 day after client’s deposit
- Q:element or compounddd?
- yes you can ,the material is fiberglass and if you read on any package of it ,it says to wear a mask.This is I'm sure already in your air system plus continouly pulling more from your attic into the system.This has to be corrected right away
- Q:how are aluminum foil, and wax paper made?
- I think he was asking not about the actual printing , but the cycles for the money when it is exchanged for example 1federal reserve 2smaller banks 3loaned out 4retail stores 5back to bank 6 etc money is printed , where does it go, where does it end up??
- Q:I Need a fast easy way to make them please and thank you! I HELP YOU IF YOU HELP ME!
- Modeling clay seems like the most likely answerYou could also scrunch aluminum foil into the shape antlers you want, and then paint them brown.
- Q:i have no clue how to make cobbler, and i really want somedoes anybody have a recipe?for fudge too?
- The average person should be reading 50-85 books a yearThis comes down to at least 2-3 books a week, which is a difficult challenge for some peopleA writer should be reading more than that because studying the craft half the way your going to get betterThe other half practicing writing yourself, and two halves make a whole, so with those two points, you should become a better writer.
- Q:we can refer to aluminium foila as tin foil and foil was made up of elemental tin.
- Early 20th century, steel was covered with tin to prevent rustingTin has a low melting point, about 450 degrees so was easy to work with given existing technologyTin shacks, Tin pans and Tin cans were all steel covered with tinMost solder, like that used on the ends of steel cans is still tin Tin is dense, heavy, and relatively expensiveTin suffers metal fatigue worse than aluminum, so bend it too many times, it will break before AlTin is easily mixed with copper, lead, silver or zinc to make brass, bronze, and pewter Aluminum is prevalent, cheap, melts at a higher temp, conducts heat and electricity wellI would bet there was at one time actual tin foil, which was replace by aluminum in maybe the 50's or 60's when aluminum was cheap to make.
- Q:Does the ID card placed in the aluminum foil packing bag protect against demagnetization?
- The foil is not anti degaussing function, I suggest you go to the Public Security Bureau accreditation department or the bank and other places, with special anti degaussing small plastic bags. Thanks for taking it!
- Q:how many electrons are in the outer shell of aluminum?
- most ammo cases are brass but a few are steel or aluminum the 'tip' is really the bullet, the actual projectileMost of them are lead with a copper coatingbut if you just want to get rid of it then take it to the recycler.
- Q:eat out of? I plan on placing rice and fish on top of the aluminum foil I made a bowl shape out ofIts safe, rite? No leeching into my food?
- don't do that , it will effect the cooking use wax paper or just oil and flour your pan
- Q:When wrapping food in aluminum foil to be placed on the grill, which side should be out? Shiny or Dull?
- From Reynolds Wrap Website: Frequently Asked Questions Which side of Reynolds Wrap? Aluminum Foil should I use, the shiny or the dull side? Actually, it makes no difference which side of the aluminum foil you use—both sides do the same fine job of cooking, freezing and storing foodThe difference in appearance between dull and shiny is due to the foil manufacturing processIn the final rolling step, two layers of foil are passed through the rolling mill at the same timeThe side coming in contact with the mill's highly polished steel rollers becomes shinyThe other side, not coming in contact with the heavy rollers, comes out with a dull or matte finishThe exception is when using Reynolds Wrap? Release? Non-Stick Aluminum FoilThe non-stick coating is applied during manufacturing to the dull side of the foilAlways place the non-stick (dull) side toward the food.
- Q:Height: 5/8 inch Width: 1 1/8 inch Length: about 24 inches Wall thickness: 1/16 inchI'd like to know the name and info of suppliers that would provide aluminum tubing with these dimensionsThanks for your help!
- Try the USB Adapter e.gpoor man's Wi-Fi .
1. Manufacturer Overview |
|
|---|---|
| Location | |
| Year Established | |
| Annual Output Value | |
| Main Markets | |
| Company Certifications | |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | |
| Export Percentage | |
| No.of Employees in Trade Department | |
| Language Spoken: | |
| b)Factory Information | |
| Factory Size: | |
| No. of Production Lines | |
| Contract Manufacturing | |
| Product Price Range | |
Send your message to us
Aluminum foil stock, don't miss it!
- Ref Price:
-
- Loading Port:
- China Main Port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- -
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Hot Searches
Related keywords
