Cabinet edge bander machine
- Ref Price:
-
- Loading Port:
- China Main Port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- -
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Cabinet edge bander machine
Advantages and Features
1. portable model;
2. can work on straight edges like inside the arc or out side the arc or circle.
3. New glue extraction system ensuring glue evenly applied to tapes;
4.Short time for warming up around 5-7 minutes;
5. Larger glue tank with litte increase on machine weight;
6. Adjustable feeding speed, feeding tape at speed around 2-6 meters per minute;
7. Longer working life due to improvements on the components;
8. Suitable for low temperature hot-melt glue (below 200 degree C)
9. All electric components are UL and CSA certificated.
Usages
1. portable edge banding machine can be used for large size wooden boards and half-finished wooden products, the board can be fixed in place while the hand-held edge bander proceeds.
2. portable edge banding machine can also be used for small sized wooden boards while the machine is fixed onto a conveyor belt or table with stand, the process of edge banding is the same for normal size boards.
3. portable edge banding machine can be used for edge banding both for straight line or curved line or arc or circle.
Technical Datas
Model | KM600D | KM450 | KM10 | KM09 | KM08 | KM07 |
Mini Radius of Banding | 20mm | 20mm | 20mm | 20mm | 20mm | 20mm |
Feeding Speed | 2-6m/min | 2-6m/min | 2-6m/min | 2-6m/min | 4m/min | 4m/min |
Thickness of Banding | 0.3-3.0mm | 0.3-3.0mm | 0.3-3.0mm | 0.3-3.0mm | 0.3-3.0mm | 0.3-3.0mm |
Width of Banding Tape | 10-60mm | 10-45mm | 10-60mm | 10-55mm | 10-45mm | 10-45mm |
Working Temperature | 200°C below | 200°C below | 200°C below | 200°C below | 200°C below | 200°C below |
Engine’s power | 25W | 25W | 25W | 25W | 15W | 25W |
Total Power | 725W | 835W | 650W | 650W | 765W | 525W |
Power Supply | 220V/50-60HZ, 110V/60HZ | 220V/50-60HZ, 110V/60HZ | 220V/50-60HZ, 110V/60HZ | 220V/50-60HZ, 110V/60HZ | 220V/50-60HZ, 110V/60HZ | 220V/50-60HZ, 110V/60HZ |
Glue Pot Capacity | 620ML | 320ML | 320ML | 320ML | 160ML | 330ML |
Net Weight | 10KG | 9.7KG | 9.2KG | 9.2KG | 8.5KG | 11KG |
Machine Size | 460X380X480mm | 460X380X480mm | 410X370X450mm | 410X370X450mm | 410X370X450mm | 410X370X450mm |
Material of Tape | PVC, Wood paper, Melamine | PVC, Wood paper, Melamine | PVC, Wood paper, Melamine | PVC, Wood paper, Melamine | PVC, Wood paper, Melamine | PVC, Wood paper, Melamine |
- Q:Floor banding how to install, please expert pointing
- Cool breeze, green floor, tell you: use nails and glue.
- Q:The more detailed the better, as long as the edge and veneer veneer detailed steps, other steps do not use.
- 1. edge:The manual or automatic edge banding machine edge, can also manually edge, no matter what kind of program are: edge, edge or edge glue - edgeband pressure post in edge - edge - on both sides of the extra redundant block edge trimming - dressing for automatic sealing machine, milling, and tracking trimming, scraping, polishing and other functions.The edge is the key to the edge of the plate must be straight, not push table saw blade size dislocation generated by the steps, to pressure post close, otherwise prone to edge and edge cracks, hand edge special glue best edge by hand, do not recommend the use of adhesive, heat is easy to fall off.2. veneer veneer:Plate thick sanding - selection of veneer veneer veneer cutting - seam - Sheet glue - coating adhesive on the veneer sheet surface into the hot pressing - trimming or trimmingSeveral key points of veneer veneer:The surface must be flat, and there must be no ribs, depressions, holes and so on, otherwise it is easy to bubbling and separating;Veneer cutting cut straight seam tight, otherwise prone to crack;Coating should be appropriate, even, too much glue, easy to penetrate, glue too little, easy to lack glue, bubble, separation;The temperature and time of pressing should be mastered accurately.
- Q:What kind of material is good for plate type furniture edge banding?
- It's special for banding!!! Plastic
- Q:My straight line edge sealing machine just started in one or two hours trip, and then the interval is getting shorter and shorter, and now a hop on the hop, what's the matter?
- There's something wrong with the current or coil
- Q:How to install stainless steel edge banding?
- RBI glass adhesive
- Q:How does the floor arc close edge? With what edge?
- Have finished copper or aluminum, can also be customized so mu Xiantiao
- Q:The formula is that the PVC and calcium powder are one to one. Is there any pigment diffusion or a color stabilizing material that can be added?
- That's stress whitening. Adding something on the recipe will improve, but the cost increases
- Q:Where is the construction of the unsupported end plate in the 11G101-1P95 page?
- Personal understanding is that the thickness of the cantilever plate reinforcement should be banding structure, such as thickness > 150mm, raft raft out of the base, the cap width of the election, and so on. The 'unsupported board' is not very good.
- Q:Which is better, the furniture edge, the button strip and the edge banding strip?
- Edge is better, beautiful and good-looking
- Q:The edge at the larger gap, there is an obvious black without glue edge is very tight, open glue appears obvious there is a black line between the edge and the board, as the pressure too tight, not tight, like a black hair with the same letter, not tight
- This is not the problem of Yitong edge machine brand, but the models of the problem. All models without pre milling cutters have this problem.
1. Manufacturer Overview |
|
|---|---|
| Location | |
| Year Established | |
| Annual Output Value | |
| Main Markets | |
| Company Certifications | |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | |
| Export Percentage | |
| No.of Employees in Trade Department | |
| Language Spoken: | |
| b)Factory Information | |
| Factory Size: | |
| No. of Production Lines | |
| Contract Manufacturing | |
| Product Price Range | |
Send your message to us
Cabinet edge bander machine
- Ref Price:
-
- Loading Port:
- China Main Port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- -
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
