Rubber Roofing Insulation - Aluminum Foil Composited Bubble Material
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT or LC
- Min Order Qty:
- 10000 m²
- Supply Capability:
- 100000 m²/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Aluminum Foil Bubble Heat Insulation
Description of Aluminum Foil Bubble:
Aluminum foil and bubble is the better product in the environmental protection, thermal insulation thermal insulation. The outermost PET has good abrasion resistance and high strength tear resistance. The bubble between the aluminum foil not only has a strong moisture, resistance oxygen, sound insulation, drop noise function, aluminum foil bubble also has very good reflective inverse heat, blocking ultraviolet.
Features of Aluminum Foil Bubble:
It is the high quality heat insulating and the invincible opponent of anti- condensation. The low and stable coefficient of heat conduction has good isolation effect.
The product has many advantages, such as light weight, heat insulation, shock absorption, sound absorption and noise reduction;
The product is easy to install and process and it also waterproof, seepage control, flame retardant.
The product also has many features, such as heat resistance, low temperature resistance, chemical resistance, ageing resistance etc.
Application of Aluminum Foil Bubble:
Building reflective heat, cold and hot water pipe insulation;
Refrigerator partition, central air conditioning, refrigerator and household appliances insulation;
Insulation, sound-absorbing, noise reduction and moisture-proof insulation in the car, train, refrigerator car, laboratory and other industries;
Special product packaging and refrigerated packing and so on
Pictures of Aluminum Foil Bubble
Specification of Aluminum Foil Bubble
STRUCTURE | ALUMINUM FOIL/BUBBLE/ALUMINUM FOIL | ALUMINUM FOIL/ BUBBLE/BUBBLE/ALUMINUM FOIL | ALUMINUM FOIL/WOVEN CLOTH/BUBBLE/WOVEN CLOTH/ALUMINUM FOIL | MPET /BUBBLE/MPET | ALUMINUM FOIL/BUBBLE/FOAM/BUBBLE/ALUMINUM FOIL |
THICKNESS | 1-4mm | 8mm | 6.5mm | 4mm | 4mm |
WEIGHT | 120GSM | 240GSM | 180GSM | 120GSM | 445GSM |
BUBBLE SIZE | 4mm HIGH x 10mm DIAMETER | 2mm HIGH x 10mm DIAMETER | 4mm HIGH x 20mm DIAMETER | 4mm HIGH x 10mm DIAMETER | 2mm HIGH x 10mm DIAMETER FOAM THICKNESS: 3.5MM |
WIDTH | 1.2m (MAX 1.5m) | 1.2m (MAX 1.5m) | 1.2m (MAX 1.5m) | 1.2m (MAX 1.5m) | 1.2m (MAX 1.5m) |
THERMAL CONDUCTIVITY | 0.034w/mo | 0.032 w/mo | 0.032w/mo | 0.034w/mo | 5.87m2.k/w |
REFLECTIVITY | 96-97% | 96-97% | 96-97% | 96-97% | 96-97% |
FAQ
We have organized several common questions for our clients，may help you sincerely:
①How about your company?
A world class manufacturer & supplier of aluminum foil bubble insulation，is one of the large-scale professional investment aluminum foil composite insulation bases in China, consisting of both casting foundry forging and machining factory. Annually more than 100,000 square meters foil insulation are exported to markets in Europe, America and Japan. OEM service available according to customer’s requirements.
②How to guarantee the quality of the products?
We have established the international advanced quality management system，every link from raw material to final product we have strict quality test; We resolutely put an end to unqualified products flowing into the market. At the same time, we will provide necessary follow-up service assurance.
③How long can we receive the product after purchase?
In the purchase of product within three working days, We will arrange the factory delivery as soon as possible. The specific time of receiving is related to the state and position of customers. Commonly 20 to 25 working days can be served.
④What is the storage condition?
The welded wire mesh should be stored at room temperature and kept from wet and heat source.
- Q: My home is shaped like a square box. The four corners of the upper level have the roof pitch from the gables protruding into the rooms. The attic has no insulation and I need to insulate it. There is access from the attic to look down into the wall/ceiling that protrudes into the room. I can insulate the attic myself but the surface area of these protrusions is rather large. What would be the best way to get insulation down in there? Shoot the insulation in and poke it with a stick to make sure there is good coverage down in the wall space? The opening is about 6 inches high.Thanks.
- Loose fill cellulose can be blown into your attic. I don't know if I understand the protrusions that you are describing but if you can freely blow the cellulose fiber into this space it should serve as a good insulation. You don't want to poke it in with a stick because you don't want to compress it. If you cannot blow this product directly into the space, you would be better off stuffing it lightly with fiberglass batting. Just don't cram it too tightly. It needs to be loose to be most effective.
- Q: My boyfriend has just moved into a flat in a newly converted house. He's up in the loft, and has just discovered that the roof isn't insulated.Does the landlord have a legal obligation to insulate the roof?
- To comply with UK building regulations all lofts must be insulated... Q22. How much loft insulation do I need? A22. To meet current Building Regulations you need 270mm of mineral wool insulation. 100mm between the ceiling joists and 170mm laid over the joists.
- Q: I live in the top most floor of a flat. Is it worth to insulate the roof (from inside) with styrofoam(thermocole) to reduce the airconditioning load. Is it really economical with respect to cost of insulation and savings gained? Any experiences?
- You want to insulate at the ceiling joist level, not at the roof-rafter level and provide ventilation for the remaining cavity. You also want to make sure you have the correct vapor barrier. But you do not want to insulate directly below and contacting the roof deck. One of the difficulties with rigid insulation is making it fit correctly and without gaps. So be careful of that. You may have to supplement the rigid sheets with foam spray at the gaps, around wires and pipes and so forth.
- Q: weather stripping/ foam strip?
- I'm assuming your talking about a ridge cap normally you would seal it in with tar or polyurethane caulk and put your shingles over it
- Q: I have a valley between two roof peaks that gets a huge icicle every year. I know this area is not insulated very well. In the house it is a dead area between two rooms. I would like to get someone over here and blow it full of insulation (couple calls in, awaiting response). In the meantime, I do have heat tapes installed on the roof in this area. It's a 50' run, zigzagged and some goes into gutter and the downspout.I am paranoid of fire hazards and have a real problem leaving these tapes plugged in. That being said, I realize snow is all around and water is flowing in this case. Is it safe to leave these plugged in?Is there a time I should be unplugging?Will this help my icicle problem?Serious replies only please. I prefer from a licensed contractor/insulator.Thanks in advance.
- They are not a substantial fire hazard. They are far more likely to just stop working than to get overheated.
- Q: Re-roof + gutters + insulationHi. My name is Sean and I live in Adelaide. I want to get rid of my asbestos roof and replace it with a Colorbond roof and new gutters and also R3 ceiling insulation. I've had 1 quote so far for $17,000 total costs, and 1 quote for roof removal only which was $3,300. Does anyone know if I can get a cheaper quote but still get a good job done please?Roof area: 160m2 approx.Gutters: 25 linear metres approx.Capping: 52 linear metres approx.Cheers.
- I am a roof plumber in melbourne I think this is a reasonable price. Materials will cost approx 8000-10000 grand 3300 for asbestos removal and the rest for labour. The best advice is plenty of quotes and keep them to their quotes. If you can get a roll of metal direct from bluescope you can get a company like apex roofing to roll it for you but it is alot of mucking around to save a little bit
- Q: Are black concrete roof tiles for my house uncomfortably hot even with roof under sheeting and insulation?
- If you sit on them, they will be uncomfortable on a hot sunny day. If you mean in the house, the "under sheeting" or radiant barrier should deflect much of the heat from the roof, and keep your house easy to cool.
- Q: I've found lots of building forums and general "building advice" columns that go over very high-level pros/cons to choosing roofing material and insulation options, but I want a site where I can see hard costs of ordering each of the materials so I don't have to call up a ton of contractors or dealers. Does such a comparison site exist? Everyone offers quotes, but that takes too much time to apply for quotes to every dealer.I'm specifically interested in knowing what green options I can afford (cotton batting vs. formaldehyde-free fiberglass, etc.).
- You could call ABC supply or Norandex Reynolds, they are the biggest distributors I know of. They may have some resources for you.
- Q: fixing my room up and it gets hot in summer so i want to put some good insulation in the roof so what could i use?
- spray in insulation works better for above ceiling although you can get the rolls just make sure it's a high enough R rating.
- Q: I would like to know which direction the one side with foil faces. The roof or the interior of the room?This is an attic room. Roof being "raw" i mean that it looks like cedar tongue in groove boards...then shingles on top of them. Which way do i face the foil side of the sheet..?thanx
- Super Tuff R Insulation
Send your message to us
Rubber Roofing Insulation - Aluminum Foil Composited Bubble Material
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT or LC
- Min Order Qty:
- 10000 m²
- Supply Capability:
- 100000 m²/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
