Que Son Low Elongation 3% Fiberglass Geogrids
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 50000 m²
- Supply Capability:
- 200000 m²/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Fiberglass Geogrid with Low Elongation of 3%
Description Of Fiberglass Geogrid with Low Elongation of 3%:
Fiberglass geogrid is a kind of new favorable earthwork base material to strengthen the road surface and roadbed.This product is made by weaving and covering fiberglass filament. It is featured by high vertical and horizontal tensile strength,low unit extension, high flexibility, and favorable high and low temperature resistance.The products after surface covering own the favorable property of alkali resistance and aging resistance. It is used widely to increase the asphalt road surface, concrete road and roadbed (both soft and hard road surfaces).Compared with the traditional road surface, it reduces the cost, prolong the service life, and avoid the reflection road crackle.This product is also used to strengthen the soft land, such as railway, airport, irrigation work, and dyke, etc, and the roadbed.
Main Features of Fiberglass Geogrid with Low Elongation of 3%:
(1)High tensile strength in both the vertical and horizontal directions;
(2)Low elongation;
(3)Excellent temperature ;
(4)Good anti-age and alkali-resistance;
(5)Reduce construction cost, extend service life of road and prevent deflection cracks.
This product is formed by weaving and covered with aphalt or PVC.
Specifications of Fiberglass Geogrid with Low Elongation of 3%:
Tensile Strength (KN) | Warp | >30 | >50 | >60 | >80 | >100 | >120 | >150 | >200 |
Weft | >30 | >50 | >60 | >80 | >100 | >120 | >150 | >120 | |
Elongation(%) | <4< p=""> | <4< p=""> | <4< p=""> | <4< p=""> | <4< p=""> | <4< p=""> | <4< p=""> | <4< p=""> | |
Mesh Size(mm) | 25.4*25.4 | 25.4*25.4 | 25.4*25.4 | 25.4*25.4 | 25.4*25.4 | 25.4*25.4 | 25.4*25.4 | 25.4*25.4 | |
Elastic Modulus | 76 | 76 | 76 | 76 | 76 | 76 | 76 | 76 | |
Width(m) | 1~6 | 1~6 | 1~6 | 1~6 | 1~6 | 1~6 | 1~6 | 1~6 | |
Length(m) | 50~300 | 50~300 | 50~300 | 50~300 | 50~300 | 50~300 | 50~300 | 50~300 | |
Temperature Resistant(℃) | -100~280 | -100~280 | -100~280 | -100~280 | -100~280 | -100~280 | -100~280 | -100~280 | |
Resin Content (%) | 18~20 | 18~20 | 18~20 | 18~20 | 18~20 | 18~20 | 18~20 | 18~20 | |
Glue Type | Bitumen PVC SBR soakage | Bitumen PVC SBR soakage | Bitumen PVC SBR soakage | Bitumen PVC SBR soakage | Bitumen PVC SBR soakage | Bitumen PVC SBR soakage | Bitumen PVC SBR soakage | Bitumen PVC SBR soakage | |
Applications of Fiberglass Geogrid with Low Elongation of 3%:
1.It reinforced old asphalt concrete road surface and asphalt surface layer ,and prevents damage
2.It is used for rebuilding cement concrete road surface into composite road surface and restraining reflection caused by block contraction
3.It is used inroad expansion and improvement project and crack by old and new combination position and uneven sedimentation
4.It is used in soft soil base reinforcement treatment ,is favorable for soft soil water separation and concretion ,restrains sedimentation effectively ,distributes stress uniformly and improve overall strength of road base
5.It is used for preventing contraction crack caused by new road semi-rigid base layer , and reinforcing and preventing road
surface crack caused by foundation crack reflection .
IMages of Fiberglass Geogrid with Low Elongation of 3%:
FAQ of Fiberglass Geogrid with Low Elongation of 3%:
1. What are we supplying?
We are specialized in producing Geosynthetic materials, like Geogrid Series, HDPE Geocell, Geonet, Geotextile, Geomat, Tri Denmensional Composite Grainage Geonet, and Geomembrane Series.
.
2. How Many years experience do we have?
We have been exported to more than 20 countries in the past 15 years.
3. How long do we usually reply your request?
We always reply our customer within 24 hours.
- Q: What is the difference between a woven and a non-woven geogrid?
- A woven geogrid is made from weaving durable synthetic fibers together, creating a strong and flexible grid structure. On the other hand, a non-woven geogrid is formed by bonding synthetic fibers together using heat and pressure, resulting in a uniform and stable matrix. Overall, the key difference lies in the manufacturing process and structure, with woven geogrids offering higher tensile strength and stability, while non-woven geogrids provide better filtration and drainage properties.
- Q: Which is the most suitable for Highway Subgrade
- We are specializing in the production of geogrid. The words are basically according to design drawings, but if you use it, most or two-way plastic and steel grating, durable plastic relatively longer, of course, the price is higher; two-way plastic instead.
- Q: Physical characteristics of geogrid construction method
- 1, with a strong tensile strength, tensile strength in the range of 25-110kn/m, according to the product model is not the same, tensile strength is not the same.2, the stress elongation is small, the structure has a good lateral stability and enhance the ability.3, high physical and chemical stability, anti-aging, anti soil burial, good corrosion resistance.4, the friction coefficient is large, the net structure is fully integrated into the earth and rock structure to enhance the stability of the structure.5, the resistance to environmental stress is strong, when the stress is enhanced with a small amount of deformation, in the -20 to 120 degrees centigrade range of temperature deformation coefficient is small.6, the width of the general 4 -6 meters, light installation construction is simple and convenient, efficient, economic.
- Q: Do geogrids enhance the load-bearing capacity of soil?
- Yes, geogrids can enhance the load-bearing capacity of soil. Geogrids are typically made of high-strength materials and are used to reinforce soil by providing additional tensile strength. When placed within the soil, geogrids distribute the load more evenly, reducing the potential for soil failure and increasing the load-bearing capacity of the soil.
- Q: Are geogrids suitable for reinforcement of airport runways?
- Yes, geogrids are suitable for the reinforcement of airport runways. Geogrids are high-strength materials that can effectively distribute loads and provide stability to the runway surface. They have been extensively used in civil engineering projects, including airport runway construction, to enhance the strength and durability of the pavement structure. Geogrids help to minimize rutting, cracking, and other forms of distress, improving the overall performance and longevity of airport runways.
- Q: Geogrid prices and geogrid manufacturers?
- Geogrid plays a very important role in road construction, which is mainly to reinforce roadbed and delay aging. The following is a detailed introduction: Geogrid on the road is mainly used for soft foundation treatment, roadbed reinforcement, slope protection, abutment reinforcement, wing wall, retaining wall, isolation and reinforcement of soil engineering.
- Q: Are geogrids suitable for erosion control?
- Yes, geogrids are suitable for erosion control. Geogrids are often used as a reinforcement material in soil stabilization and erosion control applications. These synthetic materials are designed to improve the stability and strength of the soil, preventing erosion and soil displacement. Geogrids can effectively distribute loads, reduce water flow velocity, and enhance the overall performance of erosion control measures.
- Q: Are geogrids suitable for use in high-temperature environments?
- Geogrids are generally not suitable for use in high-temperature environments as they can experience thermal degradation and loss of mechanical properties.
- Q: Are geogrids suitable for use in slope stabilization for mining tailings dams?
- Yes, geogrids are suitable for use in slope stabilization for mining tailings dams. Geogrids are engineered materials that possess high tensile strength and are specifically designed to reinforce and stabilize slopes. They can effectively mitigate the risk of slope instability and erosion in mining tailings dams, providing long-term stability and safety.
- Q: Can geogrids be used in ground stabilization for water treatment plants?
- Yes, geogrids can be used in ground stabilization for water treatment plants. Geogrids are commonly used in civil engineering projects to improve the stability and load-bearing capacity of soil. In the case of water treatment plants, geogrids can help prevent soil erosion, reinforce embankments, and provide stability to the ground, ensuring the safe and long-lasting operation of the facility.
Send your message to us
Que Son Low Elongation 3% Fiberglass Geogrids
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 50000 m²
- Supply Capability:
- 200000 m²/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
