Plastic Tubes PVC Pipe 110mm ASTM AS BS ISO GB Various Color
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1000 kg
- Supply Capability:
- 10000 kg/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
1.Specifications
pvc pipe for water drainage
1)Specification of pvc pipe:40mm-400mm
2)Thickness of pvc pipe:1.2mm-7.0mm
3)ISO certified.
2.Properties of pvc pipes:
1) Material: pvc pipe unplasticized polyvinyl chloride
2) Standard: GB, ISO9001, ISO14001
3) Color: white pvc pipe, grey pvc pipe , etc.
4) Specific Gravity, g/cm3, 20(C): 1.35 - 1.55
5) Vicat Softening Temperature, (C) >=79
6) Longitudinal Reversion, %, 150(C) <=5
7) Dichloromethane Resistance Test: No attack
8) Falling Weight Impact Test, TIR, %, 0(C) <=10
9) Tensile Yield Strength, Mpa >=40
10) Fitness of Water Tightness Test: No Leakage
11) Fitness of Air Tightness Test: No Leakage
3.Features of pvc pipes :
1) Light weight, easy to load and unload: PVC pipe is very light, convenient to handle loading unloading, and installing.
2) Good chemicals and drugs resistance: PVC pipe has its excellent resistance to the erosion caused by acids and alkalines, a great help to the chemical industries.
3) Small resistance to fluidity: The smooth surface reduces resistance to the fluids. Its roughness coefficient is only 0.009, much less than other pipes, Under same discharges, smaller cabibre of the pipe can be uesd.
4) Strong mechanical strength: Good resistance to water pressure, outside impact and pressure, is satisfied under any conditions.
5) Good electrical insulation: excellent insulation nature against electricity. the pvc pipe can be served as conduits and pipes in construction cable and wire.
6) Water quality unaffected: The solution tests on the PVC pipe show no affect on water quality when the water flows through is. It is considered the best piping material for running water works.
7) Simple installation: Very easy to connect, thus much time and laborcost may be saved.
4.Application of pvc pipes:
1) Structure Engineering, home water supply and drainage
2) Water drainage/supply system
3) for Agriculture Irrigation, aquaculture
5.Specifications of the pvc pipe:
Outer Diameter (mm) | Wall thickness(mm) | ||||||||
2.5MPA | 2.0MPA | 1.6MPA | 1.25MPA | 1.0MPA | 0.8MPA | 0.63MPA | |||
φ20 | 20*2.3 | 20*2.0 | |||||||
φ25 | 25*2.8 | 25*2.3 | 25*2.0 | ||||||
Φ32 | 32*3.6 | 32*2.9 | 32*2.4 | 32*2.0 | |||||
Φ40 | 40*4.5 | 40*3.7 | 40*3.0 | 40*2.4 | 40*2.0 | ||||
Φ50 | 50*5.6 | 50*4.6 | 50*3.7 | 50*3.0 | 50*2.4 | 50*2.0 | |||
Φ63 | 63*7.1 | 63*5.8 | 63*4.7 | 63*3.8 | 63*3.0 | 63*2.5 | 63*2.0 | ||
Φ75 | 75*8.4 | 75*6.9 | 75*5.6 | 75*4.5 | 75*3.6 | 75*2.9 | 75*2.3 | ||
Φ90 | 90*10.1 | 90*8.2 | 90*6.7 | 90*5.4 | 90*4.3 | 90*3.5 | 90*2.8 | ||
Φ110 | 110*10.0 | 110*8.1 | 110*6.6 | 110*5.3 | 110*4.2 | 110*3.4 | 110*2.7 | ||
Φ125 | 125*11.4 | 125*9.2 | 125*7.4 | 125*6.0 | 125*4.8 | 125*3.9 | 125*3.1 | ||
Φ140 | 140*12.7 | 140*10.3 | 140*8.3 | 140*6.7 | 140*5.4 | 140*4.3 | 140*3.5 | ||
Φ160 | 160*14.6 | 160*11.8 | 160*9.5 | 160*7.7 | 160*6.2 | 160*4.9 | 160*4.0 | ||
Φ180 | 180*16.4 | 180*13.3 | 180*10.7 | 180*8.6 | 180*6.9 | 180*5.5 | 180*4.4 | ||
Φ200 | 200*18.2 | 200*14.7 | 200*11.9 | 200*9.6 | 200*7.7 | 200*6.2 | 200*4.9 | ||
Φ250 | 250*11.9 | 250*9.6 | 250*7.7 | 250*6.2 | |||||
Φ315 | 315*15.0 | 315*12.1 | 315*9.7 | 315*7.7 | |||||
Φ400 | 400*19.6 | 400*15.3 | 400*12.3 | 400*9.8 | |||||
6.FAQ
Q:What is you MOQ?
A:As customer’s request.
Q:What is the production ability? or delivery time?
A:Our production ability support 40HQ order finish in one week.
Q:What is the regular shipping port?
A:Tianjin or Shanghai.
Q:What is your payment?
A:TT or CC.
Q:Can we have sample?
A:Sample free, freight cost you.
Q:For urgently doubts,who online?
A:Sales and marketing Manager 24hours online service.
- Q: How do you store plastic tubes to prevent damage?
- To prevent damage to plastic tubes, it is best to store them in a cool, dry place away from direct sunlight. It is important to avoid stacking them too high, as this could cause them to become misshapen or deformed. Additionally, consider storing them in a container or rack that keeps them upright and prevents them from rolling or bending.
- Q: Can plastic tubes be used for greenhouse installations?
- Yes, plastic tubes can be used for greenhouse installations. Plastic tubes are often used to create a framework for greenhouse structures due to their durability, flexibility, and cost-effectiveness. They provide a lightweight and easily customizable option for constructing greenhouse frames, allowing for efficient installation and maintenance. Additionally, plastic tubes can be easily shaped and connected to form various greenhouse designs, making them a popular choice for greenhouse installations.
- Q: I heard I could level my mobile home by using clear plastic tubing and red drink mix. Is that possible, and if so, how?
- let me take a guess, because i'll be honest, when i first read your question i had no idea....... but i think i've got it. put some red drink in a tube, cap both ends, lay it on the floor, and go outside and jack up the corners untill the drink mix doesn't all flow to one side. i guess you could lay the tube the whole length of the home acting as a giant level. of course this method leaves out the whole concept of what you use to prop up the corners, but I'm pretty sure you don't use the clear tubing and kool aid for that:)
- Q: Are plastic tubes suitable for hygienic applications?
- Yes, plastic tubes are suitable for hygienic applications. They are non-toxic, easy to clean, and resistant to corrosion. Additionally, plastic tubes can be designed to meet specific hygienic standards, making them a reliable choice for various industries such as food and beverage, pharmaceuticals, and medical applications.
- Q: I have a little bit of a project. I'm trying to figure a way to cool a pair of water filled tubing lines. I was thinking to wrap it with some type of cooling device but not quite sure what to use. Can you guys give me some ideas? I want to cool the lines as cool as refrigerator temps. Thanks.
- You have not said how much heat you need to disperse - whether it needs to be a continuous process or not. You have not mentioned whether the lines are flexible or what length they are! However, without making things too complicated, if you use a longish length of plastic tubing, you could coil them and run them through a bucket full of an ice/salt/water mixture. Depending on how fast the water is moving through the tubes, if you had a strong mixture of salt and ice - with just enough water in the bucket to allow conduction - you might be able to freeze the water in the tubes - which is probably NOT what you want to do. So experiment before the performance.
- Q: My 27 lb 4 year old dog possibly ate my Chapstick including the plastic tube. It was pretty small and he has not been acting any differently. My major concern is the plastic part. How soon would I start seeing symptoms if it was causing problems? It's been 24 hours since he ate it. Is something like that passable? Any insight would help! I say he may have eaten it only because I didn't physically see it happen. But one minute it was on the floor and then a minute later all i could find was the cap.
- I had a wiener dog that swallowed a Chapstick lid (10-15lb dog) and I didnt know she did or even when she did I just noticed one day that she didn#x27;t want to eat and acted as i she was uncomfortable sitting on her butt so I took her to the vet and they gave her liquid to help pass it but she didn#x27;t so it cost $300 to remove it ever dog is different some can pass some big stuff my brothers friends lab swallowed a whole XL t shirt I haven#x27;t a clue how he could have done that and no one knew he did but he passed it on his own crazy! But if your dog stops wanting to eat or acts uncomfortable in any way or doesn#x27;t pass it in another day I would deff take the dog to the vet
- Q: I have a pond pump and standard aquarium plastic tubing. I will be drilling tiny holes in equal increments throughout the tubing to release the air. Is there an equation to show the air pressure that will be released through the holes? I would like to know how many holes I need and how far to space them to achieve a certain amount of air pressure to be released from a specified length of tubing.This is a test and will not be done under water. A simple diffuser will not work for this application.Ideally I would like a formula where I can input the following and get a result:Tube LengthTube DiameterPump PSITube Hole SizeTube Hole QuantityTube Hole SpacingResultAirflow per Tube HoleAny help would be greatly appreciated. If you need more information please let me know.Thank you,
- Well, I suppose it could be done, but you would need the pressure at each hole,which is decreasing as the tube length and water depth. And you have so many variables! I also like to calculate such things as you are doing, but this is really over the top! Here is what I would do; Get a measured paper cup (say 1 cup, or 1/4 litre). Experiment with various sizes and number of holes in your tubing, then hold the cup over the coiled tubing, under water at required depth, with air pump running. Measure the time to fill the inverted cup with air. If a 1/4 litre container fills with air in 15 seconds (1/4 minute), you know you are getting 1 litre per minute. Then try other hole configurations to get what you want. This would be more fun, more practical, and will give bettter results. Good luck Bill
- Q: I need a smooth tubing or piping that can be easily bent. i dont care really what its made of, plastic or whatever, just as long as it can be about 3-5 inches in diameter and is very bendy (also possibly easily to cut). All i need is the name of the pipe and maybe a website that carries it... thanx.
- Annealed steel tubing or pipe can be bent like spaghetti. It's used in hydraulic piping applications.
- Q: How do plastic tubes compare to metal tubes in terms of durability?
- Plastic tubes are generally less durable compared to metal tubes. Metal tubes offer superior strength and are less prone to breakage or deformation under pressure or extreme conditions. However, the durability of plastic tubes can vary depending on the specific type of plastic material used.
- Q: Can plastic tubes be used for water filtration?
- Yes, plastic tubes can be used for water filtration. Plastic tubes can be incorporated into various filtration systems, such as reverse osmosis or activated carbon filters, to effectively remove impurities and contaminants from water. These tubes are commonly used in both commercial and residential water filtration systems due to their durability, flexibility, and ability to withstand exposure to water.
Send your message to us
Plastic Tubes PVC Pipe 110mm ASTM AS BS ISO GB Various Color
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1000 kg
- Supply Capability:
- 10000 kg/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
