Plastic Tubes PVC Pressure Pipe PN10&16 ASTM, AS, BS, ISO, Various Color
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1000 kg
- Supply Capability:
- 10000 kg/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
1.Specifications
pvc pipe for water drainage
1)Specification of pvc pipe:40mm-400mm
2)Thickness of pvc pipe:1.2mm-7.0mm
3)ISO certified.
2.Properties of pvc pipes:
1) Material: pvc pipe unplasticized polyvinyl chloride
2) Standard: GB, ISO9001, ISO14001
3) Color: white pvc pipe, grey pvc pipe , etc.
4) Specific Gravity, g/cm3, 20(C): 1.35 - 1.55
5) Vicat Softening Temperature, (C) >=79
6) Longitudinal Reversion, %, 150(C) <=5
7) Dichloromethane Resistance Test: No attack
8) Falling Weight Impact Test, TIR, %, 0(C) <=10
9) Tensile Yield Strength, Mpa >=40
10) Fitness of Water Tightness Test: No Leakage
11) Fitness of Air Tightness Test: No Leakage
3.Features of pvc pipes :
1) Light weight, easy to load and unload: PVC pipe is very light, convenient to handle loading unloading, and installing.
2) Good chemicals and drugs resistance: PVC pipe has its excellent resistance to the erosion caused by acids and alkalines, a great help to the chemical industries.
3) Small resistance to fluidity: The smooth surface reduces resistance to the fluids. Its roughness coefficient is only 0.009, much less than other pipes, Under same discharges, smaller cabibre of the pipe can be uesd.
4) Strong mechanical strength: Good resistance to water pressure, outside impact and pressure, is satisfied under any conditions.
5) Good electrical insulation: excellent insulation nature against electricity. the pvc pipe can be served as conduits and pipes in construction cable and wire.
6) Water quality unaffected: The solution tests on the PVC pipe show no affect on water quality when the water flows through is. It is considered the best piping material for running water works.
7) Simple installation: Very easy to connect, thus much time and laborcost may be saved.
4.Application of pvc pipes:
1) Structure Engineering, home water supply and drainage
2) Water drainage/supply system
3) for Agriculture Irrigation, aquaculture
5.Specifications of the pvc pipe:
Outer Diameter (mm) | Wall thickness(mm) | ||||||||
2.5MPA | 2.0MPA | 1.6MPA | 1.25MPA | 1.0MPA | 0.8MPA | 0.63MPA | |||
φ20 | 20*2.3 | 20*2.0 | |||||||
φ25 | 25*2.8 | 25*2.3 | 25*2.0 | ||||||
Φ32 | 32*3.6 | 32*2.9 | 32*2.4 | 32*2.0 | |||||
Φ40 | 40*4.5 | 40*3.7 | 40*3.0 | 40*2.4 | 40*2.0 | ||||
Φ50 | 50*5.6 | 50*4.6 | 50*3.7 | 50*3.0 | 50*2.4 | 50*2.0 | |||
Φ63 | 63*7.1 | 63*5.8 | 63*4.7 | 63*3.8 | 63*3.0 | 63*2.5 | 63*2.0 | ||
Φ75 | 75*8.4 | 75*6.9 | 75*5.6 | 75*4.5 | 75*3.6 | 75*2.9 | 75*2.3 | ||
Φ90 | 90*10.1 | 90*8.2 | 90*6.7 | 90*5.4 | 90*4.3 | 90*3.5 | 90*2.8 | ||
Φ110 | 110*10.0 | 110*8.1 | 110*6.6 | 110*5.3 | 110*4.2 | 110*3.4 | 110*2.7 | ||
Φ125 | 125*11.4 | 125*9.2 | 125*7.4 | 125*6.0 | 125*4.8 | 125*3.9 | 125*3.1 | ||
Φ140 | 140*12.7 | 140*10.3 | 140*8.3 | 140*6.7 | 140*5.4 | 140*4.3 | 140*3.5 | ||
Φ160 | 160*14.6 | 160*11.8 | 160*9.5 | 160*7.7 | 160*6.2 | 160*4.9 | 160*4.0 | ||
Φ180 | 180*16.4 | 180*13.3 | 180*10.7 | 180*8.6 | 180*6.9 | 180*5.5 | 180*4.4 | ||
Φ200 | 200*18.2 | 200*14.7 | 200*11.9 | 200*9.6 | 200*7.7 | 200*6.2 | 200*4.9 | ||
Φ250 | 250*11.9 | 250*9.6 | 250*7.7 | 250*6.2 | |||||
Φ315 | 315*15.0 | 315*12.1 | 315*9.7 | 315*7.7 | |||||
Φ400 | 400*19.6 | 400*15.3 | 400*12.3 | 400*9.8 | |||||
6.FAQ
Q:What is you MOQ?
A:As customer’s request.
Q:What is the production ability? or delivery time?
A:Our production ability support 40HQ order finish in one week.
Q:What is the regular shipping port?
A:Tianjin or Shanghai.
Q:What is your payment?
A:TT or CC.
Q:Can we have sample?
A:Sample free, freight cost you.
Q:For urgently doubts,who online?
A:Sales and marketing Manager 24hours online service.
- Q: I have forgotten the name of the breed altough i know it starts with sy. I just want to know if they can fit in a tube cage or will they get stuck? And what is the best breed to get if you do have a tube cage?
- The bigger breed of hamsters are called Syrians. You are right about them not fitting in tubes. Once syrians grow to their full size, they tend to get stuck in the tubes of commercial cages like Crittertrail etc. The best way to avoid this is to give them a non tube wire cage, glass tank or non tube plastic cage. Dwarfs can fit into tubes but again dwarfs are generally shy of climbing vertical tubes, so if you have a tall cage with long vertical tubes, your dwarfs might never use it in their lifetime. I have a cage with lots of tubes but I have placed them horizontal to the ground so that my dwarfs use the tubes.
- Q: How to clean the moss in the plastic pipe?
- Biocide and algicide, can quickly and effectively kill the industrial circulating water system, cooling tower, industrial storage tank, sewage treatment plant, swimming pool, landscape water system of the tank wall and the bottom of the pool, the pipeline wall green algae, cyanobacteria, algae and other algae, moss and bacteria, off, death.
- Q: I am using a device to push small volumes (60-100cc) through a plastic tube with a length of approx 24 and a diameter of 1mm or less. I can control flow rate, generally 2-4cc/sec. The liquid has a higher viscosity than water. I am trying to determine the difference in pressure on the piston face (which remains a constant size) using different fluids with slightly different viscosities through tubing of the same length, and differences in pressure using the same fluid through different tubing lengths. Ie; Fluid A and Fluid B through Tube 1, and Fluid A through Tube 1 and 2. The tubes are the same material, same diameter, regardless of length. The pressure used to push the piston remains the same across all fluid/tubing combinations.
- If the flow is not turbulent (no high speeds) and incompressible, and the tube is of circular cross section, then Poiseuille Law flow will ensue. In Poiseuille flow through a cylindrical pipe the velocity is largest along the centerline of the tube and diminishes to zero at the inner wall quadratically with distance r: v(r) = c (R^2 - r^2) with c a constant for given viscosity and pressure gradient ( delta(p) / L ) In Poiseuille flow through a cylindrical pipe the rate of flow (volume/second) is given by Qdot, where Qdot = ( Delta(p) pi R^4 ) /(8 eta L). (where eta is the dynamic viscosity of the fluid) Since the pressure difference Delta(p) is the pressure on the piston face - ambient pressure , let's call this (p - p0) , you have p - p0 = ( 8 eta L) * Qdot /(pi R^4) Using this Poiseuille' s Law you can calculate the pressure on the piston. You say at the end of your question that the pressure used to push is kept constant. In that case the flow rate you measure should be inversely proportional to eta and L.
- Q: Can plastic tubes be used in medical applications?
- Yes, plastic tubes can be used in medical applications. They are commonly used for various purposes such as delivering fluids, administering medications, draining bodily fluids, and conducting diagnostic tests. Plastic tubes offer flexibility, ease of use, and are often disposable, making them suitable for a wide range of medical procedures.
- Q: how we can design a simple total head tube ??
- Your supposition isn't splendid for a standard venturi. If the venturi is pushed (enable's say it relatively is a steam jet) then the rationalization fluid components ability that will boost the entire head on the region you point out.
- Q: Are plastic tubes resistant to pressure?
- Yes, plastic tubes are generally resistant to pressure as they are designed to withstand the forces exerted on them. However, the level of pressure they can withstand may vary depending on the type and quality of the plastic used in their manufacturing.
- Q: Is the PVC tube a plastic tube or a plastic tube?
- Is not flammable, high strength, excellent resistance to climate variability and geometric stability. PVC has strong resistance to oxidizing agents, reducing agents and strong acids. However, it can be corroded by concentrated oxidizing acids such as concentrated sulfuric acid and concentrated nitric acid, and it is also not suitable for contact with aromatic hydrocarbons and chlorinated hydrocarbons.
- Q: Do plastic tubes have any limitations in terms of recyclability or environmental impact?
- Yes, plastic tubes have limitations in terms of recyclability and environmental impact. Many plastic tubes are made from a type of plastic called polyethylene, which is not easily recyclable. Additionally, the small size and complex structure of tubes can make them difficult to separate and process in recycling facilities. This often leads to plastic tubes being discarded and ending up in landfills or oceans, contributing to environmental pollution. Therefore, finding sustainable alternatives or improving the recyclability of plastic tubes is crucial to minimize their environmental impact.
- Q: What's the function of wax in PVC plastic pipes?
- PVC (full name Polyvinylchlorid) for polyvinyl chloride, in addition to other ingredients to enhance its heat resistance, toughness, ductility and so on. The top layer of this surface film is lacquer, the main component is polyvinyl chloride, and the bottom layer is coated with adhesive. It is a very popular, popular and widely used synthetic material in the world today. Its global usage ranks second in various synthetic materials. According to statistics, only in 1995 a year, PVC production in Europe, there are about five million tons, while its consumption is five million and three hundred thousand tons. In Germany, PVC production and consumption averaged one million and four hundred thousand tons.
- Q: I have a KN in my 2000 Grand Prix Gt has the 3.8. Well I was looking into getting either a KN for a 97 Silverado 5.7 1 ton. Do the chrome air tubes have much of a different sound than a plastic air tube? I am looking on OKorder and found cheap ones vs getting the KN. All comments and suggests will be appreciated.
- 1)why okorder
Send your message to us
Plastic Tubes PVC Pressure Pipe PN10&16 ASTM, AS, BS, ISO, Various Color
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1000 kg
- Supply Capability:
- 10000 kg/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
