Plastic Tubes - PVC Pipe with 110mm, ASTM, AS, BS, ISO, GB, Various Colors
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1000 kg
- Supply Capability:
- 10000 kg/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
1.Specifications
pvc pipe for water drainage
1)Specification of pvc pipe:40mm-400mm
2)Thickness of pvc pipe:1.2mm-7.0mm
3)ISO certified.
2.Properties of pvc pipes:
1) Material: pvc pipe unplasticized polyvinyl chloride
2) Standard: GB, ISO9001, ISO14001
3) Color: white pvc pipe, grey pvc pipe , etc.
4) Specific Gravity, g/cm3, 20(C): 1.35 - 1.55
5) Vicat Softening Temperature, (C) >=79
6) Longitudinal Reversion, %, 150(C) <=5
7) Dichloromethane Resistance Test: No attack
8) Falling Weight Impact Test, TIR, %, 0(C) <=10
9) Tensile Yield Strength, Mpa >=40
10) Fitness of Water Tightness Test: No Leakage
11) Fitness of Air Tightness Test: No Leakage
3.Features of pvc pipes :
1) Light weight, easy to load and unload: PVC pipe is very light, convenient to handle loading unloading, and installing.
2) Good chemicals and drugs resistance: PVC pipe has its excellent resistance to the erosion caused by acids and alkalines, a great help to the chemical industries.
3) Small resistance to fluidity: The smooth surface reduces resistance to the fluids. Its roughness coefficient is only 0.009, much less than other pipes, Under same discharges, smaller cabibre of the pipe can be uesd.
4) Strong mechanical strength: Good resistance to water pressure, outside impact and pressure, is satisfied under any conditions.
5) Good electrical insulation: excellent insulation nature against electricity. the pvc pipe can be served as conduits and pipes in construction cable and wire.
6) Water quality unaffected: The solution tests on the PVC pipe show no affect on water quality when the water flows through is. It is considered the best piping material for running water works.
7) Simple installation: Very easy to connect, thus much time and laborcost may be saved.
4.Application of pvc pipes:
1) Structure Engineering, home water supply and drainage
2) Water drainage/supply system
3) for Agriculture Irrigation, aquaculture
5.Specifications of the pvc pipe:
Outer Diameter (mm) | Wall thickness(mm) | ||||||||
2.5MPA | 2.0MPA | 1.6MPA | 1.25MPA | 1.0MPA | 0.8MPA | 0.63MPA | |||
φ20 | 20*2.3 | 20*2.0 | |||||||
φ25 | 25*2.8 | 25*2.3 | 25*2.0 | ||||||
Φ32 | 32*3.6 | 32*2.9 | 32*2.4 | 32*2.0 | |||||
Φ40 | 40*4.5 | 40*3.7 | 40*3.0 | 40*2.4 | 40*2.0 | ||||
Φ50 | 50*5.6 | 50*4.6 | 50*3.7 | 50*3.0 | 50*2.4 | 50*2.0 | |||
Φ63 | 63*7.1 | 63*5.8 | 63*4.7 | 63*3.8 | 63*3.0 | 63*2.5 | 63*2.0 | ||
Φ75 | 75*8.4 | 75*6.9 | 75*5.6 | 75*4.5 | 75*3.6 | 75*2.9 | 75*2.3 | ||
Φ90 | 90*10.1 | 90*8.2 | 90*6.7 | 90*5.4 | 90*4.3 | 90*3.5 | 90*2.8 | ||
Φ110 | 110*10.0 | 110*8.1 | 110*6.6 | 110*5.3 | 110*4.2 | 110*3.4 | 110*2.7 | ||
Φ125 | 125*11.4 | 125*9.2 | 125*7.4 | 125*6.0 | 125*4.8 | 125*3.9 | 125*3.1 | ||
Φ140 | 140*12.7 | 140*10.3 | 140*8.3 | 140*6.7 | 140*5.4 | 140*4.3 | 140*3.5 | ||
Φ160 | 160*14.6 | 160*11.8 | 160*9.5 | 160*7.7 | 160*6.2 | 160*4.9 | 160*4.0 | ||
Φ180 | 180*16.4 | 180*13.3 | 180*10.7 | 180*8.6 | 180*6.9 | 180*5.5 | 180*4.4 | ||
Φ200 | 200*18.2 | 200*14.7 | 200*11.9 | 200*9.6 | 200*7.7 | 200*6.2 | 200*4.9 | ||
Φ250 | 250*11.9 | 250*9.6 | 250*7.7 | 250*6.2 | |||||
Φ315 | 315*15.0 | 315*12.1 | 315*9.7 | 315*7.7 | |||||
Φ400 | 400*19.6 | 400*15.3 | 400*12.3 | 400*9.8 | |||||
6.FAQ
Q:What is you MOQ?
A:As customer’s request.
Q:What is the production ability? or delivery time?
A:Our production ability support 40HQ order finish in one week.
Q:What is the regular shipping port?
A:Tianjin or Shanghai.
Q:What is your payment?
A:TT or CC.
Q:Can we have sample?
A:Sample free, freight cost you.
Q:For urgently doubts,who online?
A:Sales and marketing Manager 24hours online service.
- Q: What are the different closure options for plastic tubes?
- Some of the different closure options for plastic tubes include screw caps, flip-top caps, snap-on caps, squeeze caps, and pump dispensers.
- Q: When the concrete is poured into the concrete, the formwork is lined with white tubes. What is that for?
- Early wall bolt not used in casing, after the completion of concrete pouring in concrete wall bolt, the bolt ends exposed on the outside part of the concrete cut off, it directly resulted in the increase of cost. In recent years, in order to save the construction cost, so that the wall bolt can turnover, PVC plastic pipe for the bolt rope and then placed in the corresponding position within the template, after pouring concrete and reaches a certain intensity, can be pumped out by bolt.
- Q: What are the advantages and disadvantages of PPR plastic pipes compared with steel pipes?
- Power cost;4, corrosion resistance: with good acid, alkali, chemical resistance, electrical resistance, good corrosion resistance, the use of pitting will not occur;5 、 easy to install: flexible connection, rubber ring seal, easy installation, good sealing;6, long life: under normal working conditions, the service life of up to 50 years;7, non-toxic hygiene: in line with drinking water standards, the transmission of water from the two pollution;8, low cost: transportation and installation costs low, material costs cheaper, the total cost of the project than the cast iron pipeline savings of 30%.
- Q: i have to get it for a science roller coaster project. We are building a model roller coaster.
- Cardboard tubing is available at most shipping retailers (FedEx, Mailboxes Etc., and so forth). Foam pipe insulation and clear tubing (clear plastic hose?) can be found at most home improvement retailers (Lowe's, Home Depot, etc.) in the plumbing department.
- Q: Have you ever noticed it becomed increasingly difficult to stop unwanted back flow of paste towards the sealed end of the plastic tube. Unlike the earlier metallic tubes which could be rolled up from the bottom and be self retaining, the plastic tubes cannot be wound up into a permanent situation but always unroll to a flat state. I have ideas for a simple solution involving no external gadgetry to fiddle around with, maybe you have ideas too?? Keep it simple. Thanks
- use a clip that is used for closing off chip bags you just stick that on the end. then as you use the toothpaste you can push the clip up thus stopping the toothpaste from flowing backwards into the end of the tube. and pushing the toothpaste up you. just remember to clip the clip when you do this.
- Q: What are the problems to be overcome in the development of plastic pipe industry?
- The influencing factors are basically positive, because the plastic pipe is relatively fast, light and long in use with respect to the cast iron pipe, so the plastic pipe is basically the main pipe for the future construction of the project.
- Q: Are plastic tubes resistant to abrasion or scratching?
- Plastic tubes, depending on the type of plastic used, can vary in their resistance to abrasion and scratching. Some plastics like polyethylene or PVC can have good resistance to abrasion, making them suitable for applications that involve contact with rough surfaces. However, other plastics may be more susceptible to scratching or abrasion, especially when exposed to sharp or abrasive objects. Therefore, it is important to consider the specific type of plastic used when determining its resistance to abrasion or scratching.
- Q: There is a row of large planters outside my workplace. Each one is about the size of a bathtub. Each one has this capped white plastic tube the thickness of a beer can that sticks in halfway in the soil at a slight angle and doesn't appear to be connected to anything. What is it for?
- it could be a clean out for the under drains. planters can become water logged if they have no drain. this orifice may also a pressure washer hose or vacuum to clean the line.
- Q: How do you store chemicals in plastic tubes?
- Chemicals can be stored in plastic tubes by ensuring they are properly labeled, tightly sealed, and kept in a secure and well-ventilated area away from direct sunlight or extreme temperatures. It is important to choose tubes made of chemically resistant plastic material suitable for the specific chemicals being stored, and to follow any specific guidelines provided by the manufacturer. Additionally, it is crucial to keep an inventory of the chemicals stored in the tubes and regularly inspect them for any signs of degradation or leaks.
- Q: What are the different colors of plastic tubes available?
- The different colors of plastic tubes available can vary depending on the manufacturer and purpose, but common options include clear, white, black, red, blue, green, yellow, and orange.
Send your message to us
Plastic Tubes - PVC Pipe with 110mm, ASTM, AS, BS, ISO, GB, Various Colors
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1000 kg
- Supply Capability:
- 10000 kg/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
