Plastic Tubes - PVC Tubes UPVC Drainage Pipes on Hot Sale with Good Quality
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 kg
- Supply Capability:
- 1000 kg/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Specifications
pvc pipe for water drainage
1.Specification of pvc pipe:40mm-400mm
2.Thickness of pvc pipe:1.2mm-7.0mm
3.ISO certified.
Properties of pvc pipes:
1. Material: pvc pipe unplasticized polyvinyl chloride
2. Standard: GB, ISO9001, ISO14001
3. Color: white pvc pipe, grey pvc pipe , etc.
4. Specific Gravity, g/cm3, 20(C): 1.35 - 1.55
5. Vicat Softening Temperature, (C) >=79
6. Longitudinal Reversion, %, 150(C) <=5< span="">
7. Dichloromethane Resistance Test: No attack
8. Falling Weight Impact Test, TIR, %, 0(C) <=10< span="">
9. Tensile Yield Strength, Mpa >=40
10. Fitness of Water Tightness Test: No Leakage
11. Fitness of Air Tightness Test: No Leakage
Features of pvc pipes :
1) Light weight, easy to load and unload: PVC pipe is very light, convenient to handle loading unloading, and installing.
2) Good chemicals and drugs resistance: PVC pipe has its excellent resistance to the erosion caused by acids and alkalines, a great help to the chemical industries.
3) Small resistance to fluidity: The smooth surface reduces resistance to the fluids. Its roughness coefficient is only 0.009, much less than other pipes, Under same discharges, smaller cabibre of the pipe can be uesd.
4) Strong mechanical strength: Good resistance to water pressure, outside impact and pressure, is satisfied under any conditions.
5) Good electrical insulation: excellent insulation nature against electricity. the pvc pipe can be served as conduits and pipes in construction cable and wire.
6) Water quality unaffected: The solution tests on the PVC pipe show no affect on water quality when the water flows through is. It is considered the best piping material for running water works.
7) Simple installation: Very easy to connect, thus much time and laborcost may be saved.
Application of pvc pipes:
1) Structure Engineering, home water supply and drainage |
Specifications of the pvc pipe:
Outer Diameter (mm) | Wall thickness(mm) | |||||||
2.5MPA | 2.0MPA | 1.6MPA | 1.25MPA | 1.0MPA | 0.8MPA | 0.63MPA | ||
φ20 | 20*2.3 | 20*2.0 | ||||||
φ25 | 25*2.8 | 25*2.3 | 25*2.0 | |||||
Φ32 | 32*3.6 | 32*2.9 | 32*2.4 | 32*2.0 | ||||
Φ40 | 40*4.5 | 40*3.7 | 40*3.0 | 40*2.4 | 40*2.0 | |||
Φ50 | 50*5.6 | 50*4.6 | 50*3.7 | 50*3.0 | 50*2.4 | 50*2.0 | ||
Φ63 | 63*7.1 | 63*5.8 | 63*4.7 | 63*3.8 | 63*3.0 | 63*2.5 | 63*2.0 | |
Φ75 | 75*8.4 | 75*6.9 | 75*5.6 | 75*4.5 | 75*3.6 | 75*2.9 | 75*2.3 | |
Φ90 | 90*10.1 | 90*8.2 | 90*6.7 | 90*5.4 | 90*4.3 | 90*3.5 | 90*2.8 | |
Φ110 | 110*10.0 | 110*8.1 | 110*6.6 | 110*5.3 | 110*4.2 | 110*3.4 | 110*2.7 | |
Φ125 | 125*11.4 | 125*9.2 | 125*7.4 | 125*6.0 | 125*4.8 | 125*3.9 | 125*3.1 | |
Φ140 | 140*12.7 | 140*10.3 | 140*8.3 | 140*6.7 | 140*5.4 | 140*4.3 | 140*3.5 | |
Φ160 | 160*14.6 | 160*11.8 | 160*9.5 | 160*7.7 | 160*6.2 | 160*4.9 | 160*4.0 | |
Φ180 | 180*16.4 | 180*13.3 | 180*10.7 | 180*8.6 | 180*6.9 | 180*5.5 | 180*4.4 | |
Φ200 | 200*18.2 | 200*14.7 | 200*11.9 | 200*9.6 | 200*7.7 | 200*6.2 | 200*4.9 | |
Φ250 | 250*11.9 | 250*9.6 | 250*7.7 | 250*6.2 | ||||
Φ315 | 315*15.0 | 315*12.1 | 315*9.7 | 315*7.7 | ||||
Φ400 | 400*19.6 | 400*15.3 | 400*12.3 | 400*9.8 | ||||
- Q: Are plastic tubes safe for storing chemicals?
- Plastic tubes can be safe for storing certain chemicals, but it depends on the type of plastic used and the specific chemical being stored. Some plastics are resistant to certain chemicals, while others may react or degrade when exposed to certain substances. It is important to carefully consider the compatibility of the plastic with the chemical, ensuring that the tube is made of a material that is chemically resistant to avoid any potential hazards or contamination.
- Q: why doesnt the plastic top of superglue stick to the tube?
- It does eventually. Superglue has acetone in it, which is a solvent that's extremely volatile (evaporates very quickly). And, as long as the cap is properly sealed, the acetone won't evaporate for a while. So, the glue won't dry and glue the cap on. But, if the cap is open in the slightest - or simply over time - the acetone will start to dry up and the glue cures inside the cap. Then the only way to get it off is to use pliers to crush the hardened glue in the cap and then to twist the cap off. But, this usually ruins the cap and it will never seal properly again. At this point, it's better to just throw it away and get some more.
- Q: i saw that history of middle ear surgery is a disqualifying factor. will they check records from when i was a toddler?
- Do you still have tubes in your ears? If they have been removed, you would be OK. If they are still in. They will know as soon as you are asked to Valsalva.
- Q: How can I get the feed to keep going down into the cups? The birds peck it out, but it never goes back into the feeder cup. I have to go out and use a wire hook i made up to get it back in the cups so the birds can reach it again. It is a 4 port, about 18 inches tall, the cups are closer to the bottom, so yo'd think the weight would push the seed down into the cups. Very frustrating. It is a plastic tube maybe 1.5 inches wide, and I use black oil sunflower seed (not the shelled kind)
- Get bird feed with smaller seeds.
- Q: What are plastic tubes used for?
- Plastic tubes are commonly used for a variety of purposes such as packaging, irrigation systems, medical applications, laboratory equipment, and construction projects. They provide a lightweight and flexible solution for transporting fluids, gases, or materials in various industries.
- Q: Can plastic tubes be used for outdoor applications?
- Yes, plastic tubes can be used for outdoor applications. They are commonly used in various outdoor settings such as irrigation systems, drainage systems, and outdoor plumbing. Plastic tubes are preferred for their durability, resistance to weather conditions, and ability to withstand exposure to sunlight and moisture.
- Q: if i giv food or swith off the lights, the female would eat the eggs.HELP
- Try providing spawning mops (weighted bunches of wool), bushy plants and pieces of flat slate; the angels should then lay their eggs on these. Wait for about an hour after the female lays the eggs, so the male has a chance to fertilise them. You can then easily remove the eggs from the tank, and place them into a well-aereated empty tank, heated to about 25-20 degrees c (82 f). The fry should hatch in 7-10 days. Feed them on brineshrimp, and then a properiatery fry food mix.
- Q: Attempting to change the spark plugs in '00 Jeep Grand Cherokee. How do I get the plastic tubes off the plugs?
- try twisting them
- Q: How do you prevent plastic tubes from warping?
- One effective way to prevent plastic tubes from warping is by storing them in a cool and dry environment. Exposure to high temperatures can cause the plastic to soften and deform, leading to warping. Additionally, avoiding excessive exposure to sunlight and maintaining proper handling and storage practices will help ensure the tubes remain in their original shape.
- Q: I need to build a roller coaster
- That doesn't seem to be a suitable material, but they have it at hardware and plastic stores.
Send your message to us
Plastic Tubes - PVC Tubes UPVC Drainage Pipes on Hot Sale with Good Quality
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 kg
- Supply Capability:
- 1000 kg/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords