PRODUCT NAME:Vehicle Carrying Scissor Lifts
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 unit
- Supply Capability:
- 1000 unit/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Model | JCPT8 | JCPT9 | JCPT11 | |
Lift Rated Capacity | kg | 550 | 500 | 450 |
Platform Extend Capacity | kg | 112 | ||
Wind speed 45km/h | kg | 100 | ||
Max. Machine Height | mm | 10000 | 11000 | 13000 |
Max. Platform Height | mm | 8000 | 9000 | 11000 |
Overall Length | mm | 2700 | ||
Overall Width | mm | 1130 | ||
Overall Height | mm | 2260 | 2380 | |
Platform Size | mm | 2500X1120 | ||
Platform Extend Length | mm | 1270 | ||
Lifting Motor | 24VDC/3kw | |||
Raising/falling speed | sec | 69/58 | 78/70 | 91/74 |
Battery | 4x6V/210Ah | |||
Charger | 24V/25A | |||
NW | kg | 1740 | 1750 | 1860 |
Standard Configuration
-Charge lamp
-High capacity traction battery
-Overload limit
-Extended platform
-Emergency stop button
-Emergency descending button
-Transport standard forklift hole
-Strut bar for safe overhaul Optional Configuration
-AC power source connected to platform
-Rotary strobe light The product is mainly applied in construction site, power, communication, airport, conference and exhibition center, etc. Good stability and reliability. CE certified.
1)The platform can be extended horizontally.
2) The elevating of platform will be restricted, when charged.
3) Two settings for controlling up and down.
4) Emergency down-valve device.
- Q: How much is the 8 square meter tatami mat
- Look at the material you choose. Eight is not too small. It is estimated to be around 5,000-1w, without a lift
- Q: Does the fixed hydraulic platform need to submit to the specification requirement
- And then apply for the installation, the installation is done please them again to acceptance inspection, need to producers of products production license, installation and maintenance license, product certification, product warranty card, inspection work more troublesome, need to manufacturers and use of business cooperation. There will be a fee, in some places only provide qualification, ran a few trips, more in some places to spend a lot of it, and later to check every year.
- Q: The characteristics of hydraulic platform
- Light weight, good maneuverability, suitable for individual operation. The special mast strap-step device, which is smoothly and smoothly; 3, compact structure, small size of transportation, can enter the car of general elevator and pass through the door and narrow passageway. Double protected leg structure, work safer, and can be close to the working face lift.
- Q: Tomb raider 9 research base elevator to go to go to go to go to the order to pry the gear not to go down to go down to go down the card 3 to break up
- Press the switch and then descend the elevator down to the second floor and then climb to the right hand side of the cargo and pull down the first gear. Walk to the elevator and climb down the stairs to open the door between the second and third floors. Go up to the third floor and turn the elevator to the third floor. And then you go back to the second floor and you go to the third floor and you go to the sandwich and you get the second gear. Go up to the fourth floor and press the elevator up, go back to the third floor and switch to the three or four floors and twist the third gear. Come down to the entrance of the third floor elevator and then go in and use a shotgun to smash the three floors and the four floors. On the fourth floor elevator again back to the fourth floor, between the back to the fourth floor on the elevator by just open the channel on the wall opposite the detour to the fourth floor mezzanine dropped last gear lever.
- Q: Hydraulic platform repair work instruction book, trouble which big man helps to provide
- The maintenance system of elevators is maintained every month. Roller, intermediate shaft and bearing, oil cylinder pin shaft and bearing, arm hinge shaft and bearing, etc. All parts are filled with lubricating oil to extend the life of the bearing.
- Q: What certificate is required to operate hydraulic platform
- Need special equipment to use the license, do this card is very expensive, seem to want 500 ~ 10000. Where did you buy it, because the house can do it for you? If the product does not meet technical review do not water,,,, I know there is a producers can do STH for sb, HuaNanJun industry machinery equipment co., LTD, special equipment to check more strictly, now,
- Q: How does the platform maintain
- Inspect hydraulic oil and oil level. The hydraulic oil should be 40 to 50 mm above the tank when the platform rises to the highest. When the oil is dark, the oil is sticky, or the oil has grit and other foreign things, the hydraulic oil should be replaced in time. The hydraulic system of lift platform applies 32 # hydraulic oil. A. check the hydraulic and pipe joints. The pipe is damaged and should be replaced immediately. Tighten the joint when the connection is loose.
- Q: How is the lifting handle of the universal knee-milling machine very tight
- You're talking about a tight lock or a handle.I hope my answer will help you.
- Q: There are different kinds of milling machine and vertical lifting machine milling machine
- Horizontal milling machine also can use the above all kinds of cutting tools, but not as convenient vertical milling, mainly can use the rack cutter (mainly side and face milling cutter, flake cutter, etc.). Milling tank, milling plane, cutting etc
- Q: Put a large beaker of water on a horizontal platform and put a light glass upside down in the water
- Although the inside of the glass is going up, the increase in the pressure of the gas is less than the glass, so B is right.
Send your message to us
PRODUCT NAME:Vehicle Carrying Scissor Lifts
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 unit
- Supply Capability:
- 1000 unit/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords